Articoli correlati a Polymer Products: Design, Materials and Processing

Polymer Products: Design, Materials and Processing - Brossura

 
9789401083201: Polymer Products: Design, Materials and Processing
Vedi tutte le copie di questo ISBN:
 
 
This book is derived from a recent project sponsored by the Polymer Engineering Directorate of the SERC and carried out at the University of Lancaster under the joint auspices of the Departments of Chemistry and Engineering. The project set out to provide a novel type of teaching material for introducing polymers and their uses to students, especially of engineering. Case studies of real examples of polymers at work are used, so the student or teacher can start with a successful and well-designed product and work backwards to its origins in the market, in design and material selection and in the manufacturing process. The philosophy is that such an approach captures interest right at the start by means of a real example and then retains it because of the relevance of the technical explanation. This after all is what most of us do habitually; we turn to examples to make our point. The hope is that subject matter with a somewhat notorious reputation among engineers, such as aspects of polymer chemistry and the non-linear behaviour of polymers under mechanical loading will be fairly painlessly absorbed through the context of the examples. Each study becomes a separate chapter in the book. The original studies, and hence the present chapters, vary in length because different topics demanded different approaches. No attempt has been made to alter this, or to adopt a standardized format because to have done so would have interfered with the vitality of the original work.

Le informazioni nella sezione "Riassunto" possono far riferimento a edizioni diverse di questo titolo.

Contenuti:
1 PST 1: Injection Moulding and its Materials.- 1.1 Injection moulding.- 1.2 Amorphous and crystalline polymers.- 1.3 Polymers in the rubber state.- 1.4 Environmental stress cracking.- 1.5 Creep in polymers.- 2 Optimizing Injection Moulding Conditions.- 2.1 Introduction.- 2.2 Support bracket.- 2.3 Film spool end.- 2.4 Comment on importance of process.- 2.5 Control features in injection moulding.- 2.6 The case for the programmed machine.- 3 Some Examples of Polymer Selection.- 3.1 Combination nozzle for Electrolux cleaner.- 3.2 Impellor for Flymo hover mower.- 3.3 Flymo mower hood.- 3.4 Motor housing in vacuum cleaner.- 3.5 Moulding conditions.- 3.6 Polymer science aspects: polymers in the rubber state.- 4 Plastics Gears.- 4.1 Introduction.- 4.2 The GEC reduction gear box.- 4.3 Why plastics gears?.- 4.4 Methods for making plastics gears.- 4.5 Design of moulded gears.- 4.6 Materials.- 4.7 Design development of office copier gearbox.- 4.8 Injection moulding of gears.- 4.9 References.- 5 Acetal Clips for Roof Tiles.- 5.1 Introduction.- 5.2 The mark 9 clip.- 5.3 Loading calculations.- 5.4 Production and quality control.- 6 Acetal Spring for Selector Switch.- 6.1 Introduction.- 6.2 Development of the acetal spring.- 6.3 Evaluation and testing.- 6.4 Polymer and processing.- 6.5 Comment on design and polymer properties.- 7 PST 2: Foam Cored Mouldings.- 7.1 Structural foam.- 7.2 Comparison of the sandwich moulding and structural foam processes.- 7.3 The sandwich moulding process.- 7.4 Relative merits of compact moulding.- 8 Structural Foam Trolley Base.- 8.1 Introduction.- 8.2 Design brief.- 8.3 Material and manufacturing process selection.- 8.4 Design procedure.- 8.5 The moulding process.- 8.6 References.- 9 Washing Machine Tank in Glass-coupled Polypropylene Structural Foam.- 9.1 Introduction.- 9.2 Background.- 9.3 Operating conditions of the tank.- 9.4 Materials and process selection.- 9.5 Design features.- 9.6 The mould.- 9.7 The moulding machine.- 9.8 Processing conditions.- 9.9 Secondary operation.- 9.10 Testing.- 10 Sandwich Moulded TV Screen Frame.- 10.1 Synopsis.- 10.2 Design of the moulded TV front.- 10.3 Production details.- 10.4 Tests of finished product.- 10.5 Some other aspects of SM.- 10.6 Sandwich moulded toilet cisterns.- 10.7 UK involvement in SM.- 11 PST 3: Polyurethanes.- 11.1 Introduction.- 11.2 Basic reactions.- 11.3 Materials.- 11.4 Relationships between structure and properties.- 11.5 Polyurethane foam.- 12 Reinforced Reaction Injection Moulding (RRIM).- 12.1 Introduction.- 12.2 Polyurethane systems.- 12.3 Development of short glass-fibre reinforcement.- 12.4 RRIM development.- 12.5 The RRIM process.- 13 Polyurethane Shoe Soles.- 13.1 Introduction.- 13.2 Shoe manufacture - historical.- 13.3 Development of the PU sole.- 13.4 Polyurethane materials.- 13.5 PU shoe soling.- 13.6 Manufacture.- 13.7 Product testing.- 13.8 Design considerations.- 13.9 References.- 14 Printed Gaskets in Hydraulic Control Equipment.- 14.1 Background.- 14.2 The hydraulic control valve.- 14.3 The printed gasket.- 14.4 Polyurethane seal.- 14.5 Selection of materials.- 14.6 Production of the printed gasket.- 14.7 Testing and quality control.- 14.8 Failure in printed gaskets.- 14.9 Development of new specifications.- 14.10 Future Developments.- 15 PST 4: Glass-reinforced Plastics (GRP).- 15.1 Introduction.- 15.2 Reinforcing fibres.- 15.3 Unsaturated polyester resins.- 15.4 The hand lay-up process.- 15.5 Sheet moulding compound (SMC).- 15.6 Disadvantage of SMC Moulding Compared with Hand Lay-up.- 15.7 Stiffness of materials (with reference to GRP).- 15.8 Plastics vehicle bodies.- 16 GRP-Clad Lorry Cab.- 16.1 General description.- 16.2 Design considerations.- 16.3 Materials selection.- 16.4 Production details.- 16.5 Testing.- 16.6 Summary of costs.- 16.7 References.- 17 High Speed Train Cab.- 17.1 Introduction.- 17.2 Design considerations.- 17.3 Materials.- 17.4 Production details.- 18 DMC Vehicle Headlamps.- 18.1 Introduction.- 18.2 Historical.- 18.3 Material selection.- 18.4 Some design aspects.- 18.5 Quality and performance aspects.- 18.6 Technical appendix (Lucas).- 18.7 Manufacture.- 18.8 The test programme.- 19 ‘Fiberlam’ Aircraft Flooring.- 19.1 General description of ‘Fiberlam’.- 19.2 Materials.- 19.3 Manufacturing aspects.- 19.4 Some product features.- 19.5 Testing.- 19.6 History of sandwich structures in aircraft flooring.- 19.7 References.- 20 PST 5: Rubbers.- 20.1 Natural and synthetic rubbers.- 20.2 Polychloroprene rubber.- 20.3 Vulcanization.- 21 Rubber-Steel Conveyor Belt.- 21.1 Introduction.- 21.2 Background.- 21.3 The development of steel cord belting.- 21.4 Development of the Selby conveyor.- 21.5 Manufacture.- 21.6 Product testing.- 21.7 Installation.- 21.8 References.- 22 The Blow Moulding Process.- 22.1 Introduction.- 22.2 Blow moulding of large containers.- 22.3 Injection blow moulding.- 23 The Acitainer Blow Moulded Acid Container.- 23.1 Introduction.- 23.2 Design considerations.- 23.3 Material selection.- 23.4 Production details.- 23.5 References.- 24 Chemical Effluent Pipe in HDPE.- 24.1 Introduction.- 24.2 Effluents.- 24.3 Selection of materials.- 24.4 Design factors.- 24.5 Manufacture and assembly.- 24.6 Quality control and testing.- 24.7 Pressure pipe - pressure rating calculation.- 24.8 Static loads in buried pipe.- 24.9 Appendix: Crack Propagation.- 25 Failure of a Polypropylene Vessel.- 25.1 Introduction.- 25.2 The plant.- 25.3 The failure incident.- 25.4 Examination of fractured pipe.- 25.5 Investigation.- 25.6 Fracture calculations.- 25.7 Bubble collapse.- 25.8 Conclusion.- 25.9 Remedial action.- 26 Heat Shrinkable Terminations for Power Cables.- 26.1 Introduction.- 26.2 Heat-shrinkable plastics.- 26.3 Power cables.- 26.4 Termination by traditional methods.- 26.5 Application of heat-shrinkable plastics in MV.- 26.6 Heat-shrinkable plastics in high voltage applications.- 26.7 Stress grading.- 26.8 Non-tracking outer insulation.- 26.9 High voltage non-track material (HVTM).- 26.10 Sealant.- 26.11 The development programme.- 26.12 References.

Le informazioni nella sezione "Su questo libro" possono far riferimento a edizioni diverse di questo titolo.

  • EditoreSpringer Verlag
  • Data di pubblicazione2011
  • ISBN 10 9401083207
  • ISBN 13 9789401083201
  • RilegaturaCopertina flessibile
  • Numero di pagine364

Altre edizioni note dello stesso titolo

9780412271304: Polymer Products: Design, Materials and Processing

Edizione in evidenza

ISBN 10:  ISBN 13:  9780412271304
Casa editrice: Chapman and Hall, 1986
Rilegato

  • 9789400941021: Polymer Products: Design, Materials and Processing

    Springer, 2011
    Brossura

I migliori risultati di ricerca su AbeBooks

Immagini fornite dal venditore

Morton-Jones, D.
Editore: Springer (2011)
ISBN 10: 9401083207 ISBN 13: 9789401083201
Nuovo Soft Cover Quantità: 10
Da:
booksXpress
(Bayonne, NJ, U.S.A.)
Valutazione libreria

Descrizione libro Soft Cover. Condizione: new. Codice articolo 9789401083201

Informazioni sul venditore | Contatta il venditore

Compra nuovo
EUR 53,17
Convertire valuta

Aggiungere al carrello

Spese di spedizione: GRATIS
In U.S.A.
Destinazione, tempi e costi
Foto dell'editore

Morton-Jones, D.
Editore: Springer (2011)
ISBN 10: 9401083207 ISBN 13: 9789401083201
Nuovo Brossura Quantità: 20
Da:
Lucky's Textbooks
(Dallas, TX, U.S.A.)
Valutazione libreria

Descrizione libro Condizione: New. Codice articolo ABLIING23Apr0412070057841

Informazioni sul venditore | Contatta il venditore

Compra nuovo
EUR 56,48
Convertire valuta

Aggiungere al carrello

Spese di spedizione: EUR 3,69
In U.S.A.
Destinazione, tempi e costi
Foto dell'editore

D. Morton-Jones
Editore: Springer (2011)
ISBN 10: 9401083207 ISBN 13: 9789401083201
Nuovo Brossura Quantità: > 20
Print on Demand
Da:
Ria Christie Collections
(Uxbridge, Regno Unito)
Valutazione libreria

Descrizione libro Condizione: New. PRINT ON DEMAND Book; New; Fast Shipping from the UK. No. book. Codice articolo ria9789401083201_lsuk

Informazioni sul venditore | Contatta il venditore

Compra nuovo
EUR 61,20
Convertire valuta

Aggiungere al carrello

Spese di spedizione: EUR 11,65
Da: Regno Unito a: U.S.A.
Destinazione, tempi e costi
Foto dell'editore

David H. Morton-Jones
Editore: Springer Netherlands (2013)
ISBN 10: 9401083207 ISBN 13: 9789401083201
Nuovo Paperback Quantità: 2
Da:
Revaluation Books
(Exeter, Regno Unito)
Valutazione libreria

Descrizione libro Paperback. Condizione: Brand New. 364 pages. 9.13x6.06x0.63 inches. In Stock. Codice articolo x-9401083207

Informazioni sul venditore | Contatta il venditore

Compra nuovo
EUR 71,04
Convertire valuta

Aggiungere al carrello

Spese di spedizione: EUR 11,67
Da: Regno Unito a: U.S.A.
Destinazione, tempi e costi
Immagini fornite dal venditore

D. Morton-Jones
Editore: Springer Netherlands (2011)
ISBN 10: 9401083207 ISBN 13: 9789401083201
Nuovo Taschenbuch Quantità: 1
Da:
AHA-BUCH GmbH
(Einbeck, Germania)
Valutazione libreria

Descrizione libro Taschenbuch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book is derived from a recent project sponsored by the Polymer Engineering Directorate of the SERC and carried out at the University of Lancaster under the joint auspices of the Departments of Chemistry and Engineering. The project set out to provide a novel type of teaching material for introducing polymers and their uses to students, especially of engineering. Case studies of real examples of polymers at work are used, so the student or teacher can start with a successful and well-designed product and work backwards to its origins in the market, in design and material selection and in the manufacturing process. The philosophy is that such an approach captures interest right at the start by means of a real example and then retains it because of the relevance of the technical explanation. This after all is what most of us do habitually; we turn to examples to make our point. The hope is that subject matter with a somewhat notorious reputation among engineers, such as aspects of polymer chemistry and the non-linear behaviour of polymers under mechanical loading will be fairly painlessly absorbed through the context of the examples. Each study becomes a separate chapter in the book. The original studies, and hence the present chapters, vary in length because different topics demanded different approaches. No attempt has been made to alter this, or to adopt a standardized format because to have done so would have interfered with the vitality of the original work. Codice articolo 9789401083201

Informazioni sul venditore | Contatta il venditore

Compra nuovo
EUR 59,51
Convertire valuta

Aggiungere al carrello

Spese di spedizione: EUR 32,99
Da: Germania a: U.S.A.
Destinazione, tempi e costi
Immagini fornite dal venditore

D. Morton-Jones
Editore: Springer Netherlands (2011)
ISBN 10: 9401083207 ISBN 13: 9789401083201
Nuovo Brossura Quantità: > 20
Print on Demand
Da:
moluna
(Greven, Germania)
Valutazione libreria

Descrizione libro Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. This book is derived from a recent project sponsored by the Polymer Engineering Directorate of the SERC and carried out at the University of Lancaster under the joint auspices of the Departments of Chemistry and Engineering. The project set out to provide a. Codice articolo 5834861

Informazioni sul venditore | Contatta il venditore

Compra nuovo
EUR 48,37
Convertire valuta

Aggiungere al carrello

Spese di spedizione: EUR 48,99
Da: Germania a: U.S.A.
Destinazione, tempi e costi
Immagini fornite dal venditore

D. Morton-Jones
ISBN 10: 9401083207 ISBN 13: 9789401083201
Nuovo Taschenbuch Quantità: 2
Print on Demand
Da:
BuchWeltWeit Ludwig Meier e.K.
(Bergisch Gladbach, Germania)
Valutazione libreria

Descrizione libro Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book is derived from a recent project sponsored by the Polymer Engineering Directorate of the SERC and carried out at the University of Lancaster under the joint auspices of the Departments of Chemistry and Engineering. The project set out to provide a novel type of teaching material for introducing polymers and their uses to students, especially of engineering. Case studies of real examples of polymers at work are used, so the student or teacher can start with a successful and well-designed product and work backwards to its origins in the market, in design and material selection and in the manufacturing process. The philosophy is that such an approach captures interest right at the start by means of a real example and then retains it because of the relevance of the technical explanation. This after all is what most of us do habitually; we turn to examples to make our point. The hope is that subject matter with a somewhat notorious reputation among engineers, such as aspects of polymer chemistry and the non-linear behaviour of polymers under mechanical loading will be fairly painlessly absorbed through the context of the examples. Each study becomes a separate chapter in the book. The original studies, and hence the present chapters, vary in length because different topics demanded different approaches. No attempt has been made to alter this, or to adopt a standardized format because to have done so would have interfered with the vitality of the original work. 364 pp. Englisch. Codice articolo 9789401083201

Informazioni sul venditore | Contatta il venditore

Compra nuovo
EUR 85,55
Convertire valuta

Aggiungere al carrello

Spese di spedizione: EUR 23,00
Da: Germania a: U.S.A.
Destinazione, tempi e costi