krawitz aaron (46 risultati)

Hardcover. Condizione: New. 1st Edition. New hardcover in shrinkwrap. 612 pages.

Hardcover. Condizione: Very Good. No Jacket. Former library book; May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Vol. 216. xviii, 588 p. Softcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. NATO ASI Series, Series E: Applied Sciences, Vol. 216. Sprache: Englisch.

Hardcover. Condizione: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Paperback. Condizione: new. Paperback. The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the major problems facing engineers for many years, and so the extension of X-ray methods to the use of neutrons represents a major advance. The technique utilizes the unique penetrating power of the neutron into most engineering materials, combined with the sensitivity of diffraction, to measure the separation of lattice planes within grains of polycrystalline engineering materials, thus providing an internal strain gauge. The strain is then converted to stress using calibrated elastic constants. It was just over ten years ago that the initial neutron diffraction measurements of residual stress were carried out, and during the ensuing decade measurements have commenced at most steady state reactors and pulsed sources around the world. So swift has been the development of the field that, in addition to fundamental scientific studies, commercial measurements have been made on industrial components for several years now. The use of neutrons is ideally suited to the determination of triaxial macrostress tensors, macrostress gradients, and microstresses in composites and multiphase alloys as well as deformed, plastically anisotropic metals and alloys. To date, it has been used to investigate welded and heat-treated industrial components, to characterize composites, to study the response of material under applied loads, to calibrate more portable methods such as ultrasonics, and to verify computer modelling calculations of residual and applied stress. The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the major problems facing engineers for many years, and so the extension of X-ray methods to the use of neutrons represents a major advance. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condizione: New.

Condizione: good. Fast & Free Shipping â" Good condition with a solid cover and clean pages. Shows normal signs of use such as light wear or a few marks highlighting, but overall a well-maintained copy ready to enjoy. Supplemental items like CDs or access codes may not be included.

Condizione: New.

Condizione: New. In.

Paperback. Condizione: New.

Condizione: New. pp. 612.

Condizione: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.

Condizione: New. In.

Paperback. Condizione: new. Paperback. The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the major problems facing engineers for many years, and so the extension of X-ray methods to the use of neutrons represents a major advance. The technique utilizes the unique penetrating power of the neutron into most engineering materials, combined with the sensitivity of diffraction, to measure the separation of lattice planes within grains of polycrystalline engineering materials, thus providing an internal strain gauge. The strain is then converted to stress using calibrated elastic constants. It was just over ten years ago that the initial neutron diffraction measurements of residual stress were carried out, and during the ensuing decade measurements have commenced at most steady state reactors and pulsed sources around the world. So swift has been the development of the field that, in addition to fundamental scientific studies, commercial measurements have been made on industrial components for several years now. The use of neutrons is ideally suited to the determination of triaxial macrostress tensors, macrostress gradients, and microstresses in composites and multiphase alloys as well as deformed, plastically anisotropic metals and alloys. To date, it has been used to investigate welded and heat-treated industrial components, to characterize composites, to study the response of material under applied loads, to calibrate more portable methods such as ultrasonics, and to verify computer modelling calculations of residual and applied stress. The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the major problems facing engineers for many years, and so the extension of X-ray methods to the use of neutrons represents a major advance. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.

Taschenbuch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the major problems facing engineers for many years, and so the extension of X-ray methods to the use of neutrons represents a major advance. The technique utilizes the unique penetrating power of the neutron into most engineering materials, combined with the sensitivity of diffraction, to measure the separation of lattice planes within grains of polycrystalline engineering materials, thus providing an internal strain gauge. The strain is then converted to stress using calibrated elastic constants. It was just over ten years ago that the initial neutron diffraction measurements of residual stress were carried out, and during the ensuing decade measurements have commenced at most steady state reactors and pulsed sources around the world. So swift has been the development of the field that, in addition to fundamental scientific studies, commercial measurements have been made on industrial components for several years now. The use of neutrons is ideally suited to the determination of triaxial macrostress tensors, macrostress gradients, and microstresses in composites and multiphase alloys as well as deformed, plastically anisotropic metals and alloys. To date, it has been used to investigate welded and heat-treated industrial components, to characterize composites, to study the response of material under applied loads, to calibrate more portable methods such as ultrasonics, and to verify computer modelling calculations of residual and applied stress.

Hardcover. Condizione: Good. X_Library copy with minimal use if any. Nice corners. An excellent copy with a few library marks.

Condizione: Good. Good; Hardcover; Moderate wear to the covers; Unblemished textblock edges; The endpapers and text pages are all clean and unmarked; The binding is excellent with a straight spine; This book will be shipped in a sturdy cardboard box with foam padding; Medium Format (8.5" - 9.75" tall); 1.5 lbs; Dark blue covers with title in light blue and white lettering; 2001, Wiley-Interscience Publishing; 424 pages; "Introduction to Diffraction in Materials Science and Engineering," by Aaron D. Krawitz.

Gebunden. Condizione: New. The relevance of residual stresses in engineering components is being increasingly appreciated by modern engineers concerned with design and performance. The non-destructive evaluation of such stresses has provided a challenge which has been addressed by th.

Hardcover. Condizione: Brand New. 612 pages. 6.14x1.31x9.21 inches. In Stock.

Condizione: New.

Hardcover. Condizione: new. Hardcover. Fundamentals and practical applications of diffraction for researchers, engineers, and students Materials science relies heavily on diffraction for the analysis of materials. Introduction to Diffraction in Materials Science and Engineering is a survey of the practical aspects of this valuable tool. Though it contains basic discussion of the theory and physics of diffraction, this book emphasizes understanding and the practical application of diffraction in materials science-making it a valuable text and resource for students, professionals, and researchers. Designed as a teaching and self-study text, this resource begins with a treatment of the fundamentals of crystallography and crystal structure and its importance in diffraction before moving on to cover important aspects of diffraction applications. Numerous examples and problems at the end of each chapter, including critical thinking questions, make this an excellent tool for learning and understanding. The book includes treatments of: * Basics of crystallography * Geometrical representation of crystals and reciprocal space * X-rays and neutrons * Structure factors and intensity * Powder diffraction * Qualitative (Powder Diffraction File) and quantitative phase analysis * Use of the International Tables for more complex structures and the Reitveld method * Residual stress * Introductions to texture, small diffracting units, and long-range order Aaron Krawitz provides both a practical introduction to diffraction that suits the needs of students and a resource for professionals already at work in materials science or engineering who want to utilize the power of diffraction in the study of materials. This work offers aspects of diffraction applications and includes information on synchrotron and neutron facilities. It also provides pedagogy, including learning objectives, examples, key terms, summaries and problems and contains treatments that suits the needs of students and professionals. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.

Condizione: New.

Condizione: New. In.

Condizione: New. pp. xvi + 408.

Condizione: New.

Condizione: New.

Condizione: New. pp. xvi + 408 Illus.

Condizione: As New. Unread book in perfect condition.

Condizione: As New. Unread book in perfect condition.

Hardcover. Condizione: new. Hardcover. Fundamentals and practical applications of diffraction for researchers, engineers, and students Materials science relies heavily on diffraction for the analysis of materials. Introduction to Diffraction in Materials Science and Engineering is a survey of the practical aspects of this valuable tool. Though it contains basic discussion of the theory and physics of diffraction, this book emphasizes understanding and the practical application of diffraction in materials science-making it a valuable text and resource for students, professionals, and researchers. Designed as a teaching and self-study text, this resource begins with a treatment of the fundamentals of crystallography and crystal structure and its importance in diffraction before moving on to cover important aspects of diffraction applications. Numerous examples and problems at the end of each chapter, including critical thinking questions, make this an excellent tool for learning and understanding. The book includes treatments of: * Basics of crystallography * Geometrical representation of crystals and reciprocal space * X-rays and neutrons * Structure factors and intensity * Powder diffraction * Qualitative (Powder Diffraction File) and quantitative phase analysis * Use of the International Tables for more complex structures and the Reitveld method * Residual stress * Introductions to texture, small diffracting units, and long-range order Aaron Krawitz provides both a practical introduction to diffraction that suits the needs of students and a resource for professionals already at work in materials science or engineering who want to utilize the power of diffraction in the study of materials. This work offers aspects of diffraction applications and includes information on synchrotron and neutron facilities. It also provides pedagogy, including learning objectives, examples, key terms, summaries and problems and contains treatments that suits the needs of students and professionals. Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.