Brossura

ISBN 10: 0080982964 ISBN 13: 9780080982960

Casa editrice: Newnes, 2013

The Designer’s Guide to the Cortex-M Family is a tutorial-based book giving the key concepts required to develop programs in C with a Cortex M- based processor. The book begins with an overview of the Cortex- M family, giving architectural descriptions supported with practical examples, enabling the engineer to easily develop basic C programs to run on the Cortex- M0/M0+/M3 and M4. It then examines the more advanced features of the Cortex architecture such as memory protection, operating modes and dual stack operation. Once a firm grounding in the Cortex M processor has been established the book introduces the use of a small footprint RTOS and the CMSIS DSP library.

With this book you will learn:

• The key differences between the Cortex M0/M0+/M3 and M4
• How to write C programs to run on Cortex-M based processors
• How to make best use of the Coresight debug system
• How to do RTOS development
• The Cortex-M operating modes and memory protection
• Advanced software techniques that can be used on Cortex-M microcontrollers
• How to optimise DSP code for the cortex M4 and how to build real time DSP systems

• An Introduction to the Cortex microcontroller software interface standard (CMSIS), a common framework for all Cortex M- based microcontrollers
• Coverage of the CMSIS DSP library for Cortex M3 and M4
• An evaluation tool chain IDE and debugger which allows the accompanying example projects to be run in simulation on the PC or on low cost hardware

About the Author:

Trevor Martin graduated from Brunel University in 1988 with an Honors degree in Electrical and Electronic Engineering. In the same year he began work as a Junior Hardware engineer at Philips Medical Systems. He joined Hitex in 1992 as a Technical specialist for 8 Bit Microcontroller development tools. This included the 8051,68HC11\05\08 microcontrollers. He also gained experience with networking protocols such as CAN,USB and TCP/IP. Since 2000 he has been supporting ARM based microcontrollers, initially ARM7 and ARM9 CPU then moving to Cortex-M processor. To promote these devices he has worked closely with both NXP and ST and also TI and Freescale to a lesser extent. Since 2005 he has written a number of „Insiders Guide‟ Books which are introductory tutorials to ARM based microcontroller families such as LPC2000, STR9 and STM32. He also runs regular training courses, a general Cortex Microcontroller workshop and also device specific courses.

Review:

"The Cortex-M is well on the way to becoming an industry standard architecture for embedded systems, he warns, and knowledge of it is becoming a requisite skill for professional developers. He also explains techniques used to develop application software to run on it."--Reference & Research Book News, October 2013