Articoli correlati a Metalwork and Machining Hints and Tips: 20
Sinossi
Over many years in a workshop, the knowledge and ability to perform a wide number of relatively minor jobs becomes second nature to a skilled engineer, but the amateur, no matter how great his natural talent, rarely has the opportunity to experience the same wide range of tasks. This book, by the experienced engineer Ian Bradley, contains useful advice and instruction for beginners on workshop practices including arbors and mandrels, belt jointing and splicing, shaft collars, finishing metal surfaces, G-clamps, surface gauges, cutting holes, special nuts, hand turning tools, the wobbler, case-hardening, and machining square material. This book was suggested to the author by his many readers and correspondents as a supplementary volume to his classic textbook The Amateur's Workshop.
Le informazioni nella sezione "Riassunto" possono far riferimento a edizioni diverse di questo titolo.
Risultati della ricerca per Metalwork and Machining Hints and Tips: 20
Foto dell'editore
Metalwork and Machining Hints and Tips: 20 (Workshop Practice Series)
Editore:
Fox Chapel Publishers International, United Kingdom, Poole, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
Antico o usato
Paperback
Da: WorldofBooks, Goring-By-Sea, WS, Regno Unito
Valutazione del venditore 5 su 5 stelle
Paperback. Condizione: Very Good. Over many years in a workshop, the knowledge and ability to perform a wide number of relatively minor jobs becomes second nature to a skilled engineer, but the amateur, no matter how great his natural talent, rarely has the opportunity to experience the same wide range of tasks. This book, by the experienced engineer Ian Bradley, contains useful advice and instruction for beginners on workshop practices including arbors and mandrels, belt jointing and splicing, shaft collars, finishing metal surfaces, G-clamps, surface gauges, cutting holes, special nuts, hand turning tools, the wobbler, case-hardening, and machining square material. This book was suggested to the author by his many readers and correspondents as a supplementary volume to his classic textbook The Amateur's Workshop. The book has been read, but is in excellent condition. Pages are intact and not marred by notes or highlighting. The spine remains undamaged. Codice articolo GOR002603416
Compra usato
EUR 3,67
Spedizione EUR 6,65
Spedito da Regno Unito a U.S.A.
Spedito da Regno Unito a U.S.A.
Quantità: 4 disponibili
Foto dell'editore
Metalwork and Machining Hints and Tips
Editore:
Specialist Interest Model Books ltd, 1988
ISBN 10: 0852429479
ISBN 13: 9780852429471
Antico o usato
Brossura
Da: Better World Books: West, Reno, NV, U.S.A.
Valutazione del venditore 5 su 5 stelle
Condizione: Good. Pages intact with minimal writing/highlighting. The binding may be loose and creased. Dust jackets/supplements are not included. Stock photo provided. Product includes identifying sticker. Better World Books: Buy Books. Do Good. Codice articolo GRP13610150
Compra usato
EUR 10,69
Spedizione gratuita
Spedito in U.S.A.
Spedito in U.S.A.
Quantità: 1 disponibili
Foto dell'editore
Metalwork and Machining Hints and Tips (Workshop Practice)
Editore:
Specialist Interest Model Books ltd, 1988
ISBN 10: 0852429479
ISBN 13: 9780852429471
Antico o usato
Brossura
Da: MusicMagpie, Stockport, Regno Unito
Valutazione del venditore 5 su 5 stelle
Condizione: Very Good. 1792063115. 10/15/2026 11:18:35 AM. Codice articolo U9780852429471
Compra usato
EUR 5,89
Spedizione EUR 6,52
Spedito da Regno Unito a U.S.A.
Spedito da Regno Unito a U.S.A.
Quantità: 1 disponibili
Immagini fornite dal venditore
Metalwork and Machining Hints and Tips
Editore:
Fox Chapel Publishers International, GB, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
Nuovo
Paperback
Da: Rarewaves.com USA, London, LONDO, Regno Unito
Valutazione del venditore 5 su 5 stelle
Paperback. Condizione: New. Over many years in a workshop, the knowledge and ability to perform a wide number of relatively minor jobs becomes second nature to a skilled engineer, but the amateur, no matter how great his natural talent, rarely has the opportunity to experience the same wide range of tasks. This book, by the experienced engineer Ian Bradley, contains useful advice and instruction for beginners on workshop practices including arbors and mandrels, belt jointing and splicing, shaft collars, finishing metal surfaces, G-clamps, surface gauges, cutting holes, special nuts, hand turning tools, the wobbler, case-hardening, and machining square material. This book was suggested to the author by his many readers and correspondents as a supplementary volume to his classic textbook The Amateur's Workshop. Codice articolo LU-9780852429471
Compra nuovo
EUR 16,36
Spedizione gratuita
Spedito da Regno Unito a U.S.A.
Spedito da Regno Unito a U.S.A.
Quantità: Più di 20 disponibili
Foto dell'editore
Metalwork and Machining Hints and Tips
Editore:
Fox Chapel Publishers International, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
Nuovo
PAP
Da: PBShop.store US, Wood Dale, IL, U.S.A.
Valutazione del venditore 5 su 5 stelle
PAP. Condizione: New. New Book. Shipped from UK. Established seller since 2000. Codice articolo FV-9780852429471
Compra nuovo
EUR 16,37
Spedizione gratuita
Spedito in U.S.A.
Spedito in U.S.A.
Quantità: 15 disponibili
Foto dell'editore
Metalwork and Machining Hints and Tips: 20 (Workshop Practice Series)
Da: Chiron Media, Wallingford, Regno Unito
Valutazione del venditore 5 su 5 stelle
paperback. Condizione: New. Brand new book, sourced directly from publisher. Dispatch time is 6-7 days from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely. Codice articolo 6666-MAC-9780852429471
Compra nuovo
EUR 11,18
Spedizione EUR 5,33
Spedito da Regno Unito a U.S.A.
Spedito da Regno Unito a U.S.A.
Quantità: 10 disponibili
Immagini fornite dal venditore
Metalwork and Machining Hints and Tips (Paperback)
Editore:
Fox Chapel Publishers International, Hemel Hempstead, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
Nuovo
Paperback
Da: Grand Eagle Retail, Bensenville, IL, U.S.A.
Valutazione del venditore 5 su 5 stelle
Paperback. Condizione: new. Paperback. Over many years in a workshop, the knowledge and ability to perform a wide number of relatively minor jobs becomes second nature to a skilled engineer, but the amateur, no matter how great his natural talent, rarely has the opportunity to experience the same wide range of tasks. This book, by the experienced engineer Ian Bradley, contains useful advice and instruction for beginners on workshop practices including arbors and mandrels, belt jointing and splicing, shaft collars, finishing metal surfaces, G-clamps, surface gauges, cutting holes, special nuts, hand turning tools, the wobbler, case-hardening, and machining square material. This book was suggested to the author by his many readers and correspondents as a supplementary volume to his classic textbook The Amateur's Workshop. A workshop information anthology combining useful advice and instruction for beginners, with explanations of tools and techniques often familiar in name but not always found described in detail. Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Codice articolo 9780852429471
Compra nuovo
EUR 18,21
Spedizione gratuita
Spedito in U.S.A.
Spedito in U.S.A.
Quantità: 1 disponibili
Foto dell'editore
Metalwork and Machining Hints and Tips
Editore:
Fox Chapel Publishers International, 1998
ISBN 10: 0852429479
ISBN 13: 9780852429471
Nuovo
PAP
Da: PBShop.store UK, Fairford, GLOS, Regno Unito
Valutazione del venditore 5 su 5 stelle
PAP. Condizione: New. New Book. Shipped from UK. Established seller since 2000. Codice articolo FV-9780852429471
Compra nuovo
EUR 15,71
Spedizione EUR 3,90
Spedito da Regno Unito a U.S.A.
Spedito da Regno Unito a U.S.A.
Quantità: 15 disponibili
Foto dell'editore
Metalwork & Machining: Hints & Tips
Editore:
Specialist Interest Model Books ltd, 1988
ISBN 10: 0852429479
ISBN 13: 9780852429471
Nuovo
Brossura
Da: Brook Bookstore On Demand, Napoli, NA, Italia
Valutazione del venditore 5 su 5 stelle
Condizione: new. Codice articolo ab40317f9c272fff5333d653e5ca3b0a
Compra nuovo
EUR 16,32
Spedizione EUR 4,00
Spedito da Italia a U.S.A.
Spedito da Italia a U.S.A.
Quantità: Più di 20 disponibili
Foto dell'editore
Metalwork and MacHining Hints and
Editore:
Nexus Special Interests, Hertfordshire, 1988
ISBN 10: 0852429479
ISBN 13: 9780852429471
Antico o usato
Brossura
Da: Ghost River Rare and Used Books, Cremona, AB, Canada
Valutazione del venditore 5 su 5 stelle
Condizione: V. Good. Hertfordshire: Nexus Special Interests, 1988. 94 pages. Workshop practice series number 20. contains useful advice and instruction for beginners on workshop practices including arbors and mandrels, belt jointing and plicing, shaft collars, finishing metal surfaces, G-clamps, surface gauges, cutting holes, special nuts, hand turning tools, the wobbler, case-hardening, and maching square material. Soft cover has no creases. No former owner's name. Text is unmarked. Trade V. Good. Codice articolo 100340
Compra usato
EUR 7,81
Spedizione EUR 13,82
Spedito da Canada a U.S.A.
Spedito da Canada a U.S.A.
Quantità: 1 disponibili