Sinossi
The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride; in the 70s, improved aluminas, sintered silicon carbide and silicon nitrides (including sialons); in the 80s, various toughened Zr0 materials, ceramic matrix composites reinforced with silicon 2 carbide continuous fibres or whiskers. Design methodologies were evolved in the 70s, incorporating the principles of fracture mechanics and the statistical variation and time dependence of strength. These have been used successfully to predict the engineering behaviour of ceramics in the lower range of temperature. In spite of the above, and the underlying thermodynamic arguments for operations at higher temperatures, there has been a disappointing uptake of these materials in industry for high temperature usc. Most of the successful applications are for low to moderate temperatures such as seals and bearings, and metal cutting and shaping. The reasons have been very well documented and include: Poor predictability and reliability at high temperature. High costs relative to competing materials. Variable reproducibility of manufacturing processes. Lack of sufficiently sensitive non-destructive techniques. With this as background, a Europhysics Industrial Workshop sponsored by the European Physical Society (EPS) was organised by the Netherlands Energy Research Foundation (ECN) and the Institute for Advanced Materials of the Joint Research Centre (JRC) of the EC, at Petten, North Holland, in April 1990 to consider the status of thermomechanical applications of engineering ceramics.
Le informazioni nella sezione "Riassunto" possono far riferimento a edizioni diverse di questo titolo.
Altre edizioni note dello stesso titolo
Risultati della ricerca per Designing With Structural Ceramics
Foto dell'editore
Designing with Structural Ceramics
Da: Lucky's Textbooks, Dallas, TX, U.S.A.
Valutazione del venditore 5 su 5 stelle
Condizione: New. Codice articolo ABLIING23Mar2912160256087
Compra nuovo
EUR 53,65
Spese di spedizione:
EUR 3,46
In U.S.A.
Quantità: Più di 20 disponibili
Foto dell'editore
Designing with Structural Ceramics
Da: Ria Christie Collections, Uxbridge, Regno Unito
Valutazione del venditore 5 su 5 stelle
Condizione: New. In. Codice articolo ria9781851667406_new
Compra nuovo
EUR 59,54
Spese di spedizione:
EUR 13,63
Da: Regno Unito a: U.S.A.
Quantità: Più di 20 disponibili
Immagini fornite dal venditore
Designing with Structural Ceramics
Editore:
Springer Netherlands Dez 1991, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
Nuovo
Rilegato
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germania
Valutazione del venditore 5 su 5 stelle
Buch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride; in the 70s, improved aluminas, sintered silicon carbide and silicon nitrides (including sialons); in the 80s, various toughened Zr0 materials, ceramic matrix composites reinforced with silicon 2 carbide continuous fibres or whiskers. Design methodologies were evolved in the 70s, incorporating the principles of fracture mechanics and the statistical variation and time dependence of strength. These have been used successfully to predict the engineering behaviour of ceramics in the lower range of temperature. In spite of the above, and the underlying thermodynamic arguments for operations at higher temperatures, there has been a disappointing uptake of these materials in industry for high temperature usc. Most of the successful applications are for low to moderate temperatures such as seals and bearings, and metal cutting and shaping. The reasons have been very well documented and include: - Poor predictability and reliability at high temperature. - High costs relative to competing materials. - Variable reproducibility of manufacturing processes. - Lack of sufficiently sensitive non-destructive techniques. With this as background, a Europhysics Industrial Workshop sponsored by the European Physical Society (EPS) was organised by the Netherlands Energy Research Foundation (ECN) and the Institute for Advanced Materials of the Joint Research Centre (JRC) of the EC, at Petten, North Holland, in April 1990 to consider the status of thermomechanical applications of engineering ceramics. 356 pp. Englisch. Codice articolo 9781851667406
Compra nuovo
EUR 53,49
Spese di spedizione:
EUR 23,00
Da: Germania a: U.S.A.
Quantità: 2 disponibili
Foto dell'editore
Designing with Structural Ceramics
Editore:
Kluwer Academic Publishers Group, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
Nuovo
Rilegato
Da: THE SAINT BOOKSTORE, Southport, Regno Unito
Valutazione del venditore 5 su 5 stelle
Hardback. Condizione: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days 760. Codice articolo C9781851667406
Compra nuovo
EUR 67,70
Spese di spedizione:
EUR 20,88
Da: Regno Unito a: U.S.A.
Quantità: Più di 20 disponibili
Immagini fornite dal venditore
Designing with Structural Ceramics
Print on DemandDa: moluna, Greven, Germania
Valutazione del venditore 4 su 5 stelle
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride in the 70s, improved aluminas, sint. Codice articolo 448377348
Compra nuovo
EUR 48,37
Spese di spedizione:
EUR 48,99
Da: Germania a: U.S.A.
Quantità: Più di 20 disponibili
Foto dell'editore
Designing With Structural Ceramics
Da: Revaluation Books, Exeter, Regno Unito
Valutazione del venditore 5 su 5 stelle
Hardcover. Condizione: Brand New. 351 pages. 9.88x6.97x1.14 inches. In Stock. Codice articolo x-1851667407
Compra nuovo
EUR 83,41
Spese di spedizione:
EUR 14,22
Da: Regno Unito a: U.S.A.
Quantità: 2 disponibili
Foto dell'editore
Designing with Structural Ceramics (Commission of the European Communities)
Editore:
Elsevier Science Publishers Ltd., Barking, Essex, England, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
Antico o usato
Rilegato
Prima edizione
Da: PsychoBabel & Skoob Books, Didcot, Regno Unito
Valutazione del venditore 5 su 5 stelle
hardcover. Condizione: Very Good. Condizione sovraccoperta: No Dust Jacket. First Edition, First Printing. numerous figures and tables, bump to tail of spine, small scrape to bottom of back cover, text and illustrations are clean, bright and tight throughout. Ex-Library. Codice articolo 102448
Compra usato
EUR 93,26
Spese di spedizione:
EUR 10,81
Da: Regno Unito a: U.S.A.
Quantità: 1 disponibili
Immagini fornite dal venditore
Designing with Structural Ceramics
Editore:
Springer Netherlands, Springer Netherlands Dez 1991, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
Nuovo
Rilegato
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germania
Valutazione del venditore 5 su 5 stelle
Buch. Condizione: Neu. Neuware -The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride; in the 70s, improved aluminas, sintered silicon carbide and silicon nitrides (including sialons); in the 80s, various toughened Zr0 materials, ceramic matrix composites reinforced with silicon 2 carbide continuous fibres or whiskers. Design methodologies were evolved in the 70s, incorporating the principles of fracture mechanics and the statistical variation and time dependence of strength. These have been used successfully to predict the engineering behaviour of ceramics in the lower range of temperature. In spite of the above, and the underlying thermodynamic arguments for operations at higher temperatures, there has been a disappointing uptake of these materials in industry for high temperature usc. Most of the successful applications are for low to moderate temperatures such as seals and bearings, and metal cutting and shaping. The reasons have been very well documented and include: ¿ Poor predictability and reliability at high temperature. ¿ High costs relative to competing materials. ¿ Variable reproducibility of manufacturing processes. ¿ Lack of sufficiently sensitive non-destructive techniques. With this as background, a Europhysics Industrial Workshop sponsored by the European Physical Society (EPS) was organised by the Netherlands Energy Research Foundation (ECN) and the Institute for Advanced Materials of the Joint Research Centre (JRC) of the EC, at Petten, North Holland, in April 1990 to consider the status of thermomechanical applications of engineering ceramics. 356 pp. Englisch. Codice articolo 9781851667406
Compra nuovo
EUR 53,49
Spese di spedizione:
EUR 60,00
Da: Germania a: U.S.A.
Quantità: 2 disponibili
Immagini fornite dal venditore
Designing with Structural Ceramics
Print on DemandDa: preigu, Osnabrück, Germania
Valutazione del venditore 5 su 5 stelle
Buch. Condizione: Neu. Designing with Structural Ceramics | M. H. van de Voorde (u. a.) | Buch | Einband - fest (Hardcover) | Englisch | 1991 | Springer Netherland | EAN 9781851667406 | Verantwortliche Person für die EU: Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg, productsafety[at]springernature[dot]com | Anbieter: preigu Print on Demand. Codice articolo 107091954
Compra nuovo
EUR 50,95
Spese di spedizione:
EUR 70,00
Da: Germania a: U.S.A.
Quantità: 5 disponibili
Immagini fornite dal venditore
Designing with Structural Ceramics
Editore:
Springer Netherlands, Springer Netherlands, 1991
ISBN 10: 1851667407
ISBN 13: 9781851667406
Nuovo
Rilegato
Da: AHA-BUCH GmbH, Einbeck, Germania
Valutazione del venditore 5 su 5 stelle
Buch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - The last 30 years have seen a steady development in the range of ceramic materials with potential for high temperature engineering applications: in the 60s, self-bonded silicon carbide and reaction-bonded silicon nitride; in the 70s, improved aluminas, sintered silicon carbide and silicon nitrides (including sialons); in the 80s, various toughened Zr0 materials, ceramic matrix composites reinforced with silicon 2 carbide continuous fibres or whiskers. Design methodologies were evolved in the 70s, incorporating the principles of fracture mechanics and the statistical variation and time dependence of strength. These have been used successfully to predict the engineering behaviour of ceramics in the lower range of temperature. In spite of the above, and the underlying thermodynamic arguments for operations at higher temperatures, there has been a disappointing uptake of these materials in industry for high temperature usc. Most of the successful applications are for low to moderate temperatures such as seals and bearings, and metal cutting and shaping. The reasons have been very well documented and include: - Poor predictability and reliability at high temperature. - High costs relative to competing materials. - Variable reproducibility of manufacturing processes. - Lack of sufficiently sensitive non-destructive techniques. With this as background, a Europhysics Industrial Workshop sponsored by the European Physical Society (EPS) was organised by the Netherlands Energy Research Foundation (ECN) and the Institute for Advanced Materials of the Joint Research Centre (JRC) of the EC, at Petten, North Holland, in April 1990 to consider the status of thermomechanical applications of engineering ceramics. Codice articolo 9781851667406
Compra nuovo
EUR 59,27
Spese di spedizione:
EUR 63,98
Da: Germania a: U.S.A.
Quantità: 1 disponibili