Advanced Tribology: Proceedings of CIST2008 & ITS-IFToMM2008 - Rilegato

Luo, Jianbin; Meng, Yonggang; Shao, Tianmin; Zhao, Qian

Rilegato

ISBN 10: 364203652X ISBN 13: 9783642036521

Casa editrice: Springer Verlag, 2009

Riassunto

"Advanced Tribology" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; tribology of coatings, surface and interface; biotribology; tribo-chemistry; industry tribology. The book reflects the recent progress in the fields such as lubrication, friction and wear, coatings, and precision manufacture etc. in the world.

The book is intended for researchers, engineers and graduate students in the field of tribology, lubrication, mechanical production and industrial design.

The editors Jianbin Luo, Yonggang Meng, Tianmin Shao and Qian Zhao are all the professors at the State Key Lab of Tribology, Tsinghua University, Beijing.

Su questo libro

Contenuti

Plenary Lectures.- Current Industrial Activities of Tribology in China.- The Fullerene-Like Nanostructure Hydrogenated Carbon Films with Super-Low Friction.- Tribology in Nanomanufacturing—Interaction between Nanoparticles and a Solid Surface.- Tribology at Small Scales.- Frontiers of Research in Liquid Lubrication.- Keynote Talks.- EHL with Grease at Low Speeds.- The Nature of Adhesion and Friction.- Space Tribology of China.- Active Control of Sliding Friction.- Superhard and Low Friction Nanocomposite Coatings: Design, Synthesis, and Applications.- Tribology of Metal-on-Metal Bearings at High Inclination Angles.- Technical Sessions.- Key Factors to Induce Cavitation-Erosion.- Mechanical and Tribological Properties of TiC-Reinforced HSS-Based Composites with an Interpenetrating Network for High Temperature Self-Lubrication Applications.- Friction and Wear Characteristics of Advanced Space Lubricants.- Lubrication Analysis of Journal Bearing and Rotor System Using CFD and FSI Techniques.- Oil Film Behavior under Minute Vibrating Conditions in EHL Point Contacts.- Different Loading and Motion Applied on Hip Simulators Affects the Lubrication of Metal-on-Metal Hip Implants.- EHD Lubrication of Different Types of Gears.- The Role of Heat Partition in Elastohydrodynamic Lubrication.- Influence of Surface Roughness on Elastohydrodynamic Journal Bearings with Non-Newtonian Lubricants.- Theoretical Investigation of Journal Bearings with Non-Newtonian Fluids Included Thermal Effects.- Magnetic Fluid Based Squeeze Film Behavior between Transversely Rough Curved Plates.- Engine Lubrication System Analysis and Oil Pump Design Optimization.- Temperature-Dependent Rheology and Tribology of Lubrication Greases Investigated with New Flexible Platform for Tribological Measurements on A Rheometer.- Study on Characteristic Parameters of Wear Particle Boundary.- Viscosity Variation Model and Its Application in Micro/Nano-Scale Clearance.- Numerical Solving Method for the Structural Stiffness of Gas Foil Bearings.- Biotribological Properties of Natural Swine Joint Cartilage.- Effect of Surface Texturing on Lubrication Film Formation within Non-Conformal Contacts.- Experimental Investigation of Time-Dependent Oil Film Pressure in a Dynamically Loaded Journal Bearing.- Experimental Research and Numerical Simulation of LY12 and HPb62-2 Ring Compression.- Application of Metal Self-Repairing Additives on Cylinder-Piston Ring Rubbing Pairs.- Wettability Study of Multiply-Alkylated Cyclopentanes (MACs) on Silicon Substrates.- Numerical Analysis on Hydrodynamics of Circular Translational Polishing under Mixed Lubrication.- Micro-Tribological Analysis of POM-MoS2s-Compounds.- On Lubrication Characteristics of Dual Tori Double-Enveloping Toroidal Worm Drive.- Thermoelastohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft Deformation under Load.- Transient Behavior of Elasto-Metal-Plastic Journal Bearing during the Stage of Stop.- Analyses on the Splashing Parameters of High-Speed Oil Impacted a Wall in Jet Lubrications.- Interferometry Measurement of Spinning Effect on Sliding EHL.- Effect of Wide Dimples on Planar Contact Lubrication.- Friction Properties and Microstructure of Al-Cu-Fe Nano Films.- Tribological Properties of Ti6Al4V Alloy by FOTS Self-Assembled Monolayers Modification Treatment.- Influence of Spinning Effect on the Rolling EHL Films.- A Study on Lubrication Characteristics between Piston Ring and Cylinder Bore of Bent-Axis Type Piston Pump.- The Fabrication and Lubricant Performance of MoS2 Nanotubes Arrays.- The Research on the Lubricant Aging under Durability Test of the Porous Sliding Bearings.- Models for Predicting Friction Coefficient and Parameters with Influence in Elastohydrodynamic Lubrication.- Elastohydrodynamic Film Thickness in Elliptical Contacts with Rolling and Spinning.- Experimental Study on the Tribological Properties of Pure Powder Lubrication under Plane Contact.- Hydrodynamic Analysis and Experiment Verification of the High-Pressure Small-Flow Centrifugal Pump.- Effect of Liquid Surface Tension and Viscosity on Micro-Bubble Induced by External Electric Field.- Study of Water Lubrication in Sliding Point Contact Friction Pairs with Hydrophobic Surfaces.- A Simplified Numerical Elastic-Plastic Contact Model for Rough Surfaces.- Film Characteristics of Grease in Point Contact under Micro-Swaying Motion.- Effects of Solid Body Temperature on the Non-Newtonian Thermal EHL Behavior in Point Contacts.- Numerical Analysis on Dynamic Characteristics of Flying Magnetic Head with Ultra Thin Spacing.- The Analysis of Higher Guide Bearing Pad Temperature and Its Fault Diagnosis.- Pitting Life Prediction Based on a 3-D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation.- Numerical Lubrication Simulation of Metal-on-Metal Hip Joints: Ball-in-Socket Model and Ball-on-Plane Model.- Deterministic Simulation of Surfaces in Conformal-Contact Lubrication.- Simulation and Experimental Validation of the Effect of Surface Texture on Fluid Film Formation.- Marangoni Stress and Its Effects on the Flow in an Evaporating Sessile Droplet.- Film Forming Characteristics of Oil-in-Water Emulsion with Super-Low Oil Concentration.- A Piston Lubrication Model Considering the Coupling between the Piston Secondary Motion and the System Inertia Variation in an IC Engine.- Analysis of the Combined Effect of the Surface Roughness and Inertia on the Performance of High-Speed Hydrostatic Thrust Bearing.- Study on the Efficiency of the New-Style Reducer with the Green Lubricant.- Pressure Dependence of the Limiting Shear Stress Coefficient of Liquid Lubricants.- A Method of Dual Number for the Aerodynamic Property Analysis of Gas-Lubricated Mechanism: Self-Pressurizing Thrust Bearings and Non-Contacting Face Seals (Part I: Analytical Methods).- A Model for the Calculation of the Micro-Pores Number of Compressively Molded Polyimide Porous Materials.- Frictional Dynamics in a Two Dimensional Frenkel-Kontorova Model with Square Lattice Symmetry.- Advances in Investigation of Elasto-Aerodynamic Lubrication in Compliant Foil Bearings.- Normal Stress Effects in Journal Bearing Lubrication with Maxwell Fluid.- Analysis of Bearing Outer Ring Creep with FEM.- Effects of Content of MoS2 on Sliding Tribological Behavior of Copper-Based Powder Metallurgy Materials under Electrical Current.- Research on Frictional Wear Properties of C/C Composite with Electric Current.- Friction Behavior of C/C-SiC Braking Composites Fabricated by Warm Compacted-in situ Reaction.- Tribological Properties of Hybrid Ag4SiW12O40 Nanoparticles Multilayer Films.- Study on Fatigue Crack Behavior of Rail in Different Curve Radius.- Improvement in Wear Resistance of TiNi Alloy Processed by Equal Channel Angular Extrusion and Annealing Treatment.- Self-Healing of a Soft Primer Coating Caused by Plasticization during Sliding against UHMWPE.- Performance of an Infinitely Long Transversely Rough Hydrodynamic Slider Bearing.- Investigation of Fretting Fatigue Behavior of Ti811 Alloy at Elevated Temperature.- Dry Sliding Wear Behavior of a Tribological Couple: Spray-Deposited Al-Si/SiCp Composites/Brake Pads.- Wear Behaviors of a Cu-Based Bulk Metallic Glass under Various Gas Atmosphere.- A Study of the Correlation between Gear Wear and Vibration.- Study on the Relationship between Microstructural Change in Friction-Induced Deformation Layer and Friction Behavior of Austenitic Stainless Steel.- Abrasive Wear Behavior of Several Metallic Materials under Simulated Sand-Dust Environment.- Wear Behavior of Plasma-Nitrided 2Cr13 Martensitic Stainless Steel under Air and Vacuum.- Sealing Performance and Wear Mechanism of PTFE Oil Seal.- Fretting Corrosion Wear of Synergy between Mechanical and Electrochemical for Biomaterials in Hanks Balanced Salt Solution.- Torsional Fretting Behaviors of UHMWPE against Different Counter-Bodies.- An Experimental Study on the Rotational Fretting Wear Behavior of LZ50 Steel.- Comparative Study of Tribological Properties with Different Fibers Reinforced PTFE/PEEK Composites at Elevated Temperatures.- Research on Friction Characteristic of End Faces of Mechanical Seals.- Failure Mechanism of Hadfield Steel Crossing.- Synthesis and Tribological Behavior of Surface Coated Cu Nanoparticles in Liquid Paraffin.- Tribological Behaviors at High Load of MoS2 Films in Vacuum.- Experimental Study on Running-in of Steel Fiction Pair of Block on Disk in Oil with Micro-and-Nano Diamond Powder.- Thermomechanical Properties and Tribological Behavior of CaCO3 Whisker Reinforced Polyetheretherketone Composites.- Corrosive Fretting Wear Behavior of a Titanium Alloy TC11 in Artificial Seawater.- Investigation on Rolling Contact Fatigue and Wear Properties of Railway Rail.- Superlubricity Characteristics Using Ceramic Composite Mineral Powder as Lubricating Oil Additive.- On the Wear-Resistance of Zinc-Based Composites Reinforced by Modified Silicon Phase.- On the Wear-Resistance of Low-Alloyed Steel Modified by Inoculants.- Research on Worn Mechanism of Disc-Brake Pair Materials for Drilling Rig.- Modelling of Self-Lubrication in Frictional Interaction.- An Asperity-Contact Based Oxidation Model for Fretting Wear with the Presence of Debris.- Rolling Contact Fatigue of Silicon Nitride Balls under Pure Rolling Condition.- Influence of Different External Pressure on the Thermo-Mechanical Coupling of the Rough Surface during Sliding Contact.- Effect of Transverse Surface Topography on Cavitation Erosion.- The Theory of Debris Group in Ferrographic Analysis.- A Method to Monitor Nonferrous Debris in Ferrographic Analysis.- Interaction between Micro-Particales and Bubbles in Cavitation-Erosion of Hydro-Machinery.- Magnetization of Friction Surfaces and Wear Particles under Tribological Processes.- Wear Progress Prediction of Carbide Tool in Turning of AISI1045 by Using FEM.- Friction and Wear Properties of Fe7Mo6-Based Alloy under the Lubrication of Ethyl-Alcohol.- Seizure of PEEK and Its Composite at High Sliding Velocity in Oil Lubrication.- Tribological Behavior of Chromium Alloyed Layer Prepared on Surface of TiAl.- Wear Characteristics under Boundary Lubrication Contacts in Phosphorated Starch Based Electrorheological Fluids.- Abrasive Wear Mechanisms of Multi Component Ferrous Alloys Abraded by Soft, Fine Abrasive Particles.- The Analyzes of Mutual Influence of Contact Spots in Sliding Contact of a Periodic Surface and a Viscoelastic Foundation.- Different Nano-Fillers on the Tribological Properties of PTFE Nanocomposites.- Study on Surface Passivation Treatment and Tribological Properties of 1Cr18Ni9Ti Stainless Steel in Hydrogen Peroxide.- High Speed Tribology: Some Developments on Thermal Behaviors.- Dry Sliding Wear Behavior of Cu-Graphite Composite within a Wide Range of Sliding Velocity.- Tribological Aspects of Control over Frictional Interaction between Solids in the Presence of Liquid Crystals.- Effects of the Concentration of Sodium Lauryl Sulfate Solution and NaCl Additive on the Potential-Controlled Friction.- Study of Wear and Corrosion Properties of Coated Ionic Liquid.- Deformation Behavior of Al-4Cu-2Mg Alloy during Cold Upset Forging.- Dry Sliding Wear Behavior of Pure Aluminium and Al-Cu Alloys.- Tribological Properties of Spark-Plasma-Sintered Al2O3-SrSO4 Self-Lubricating Nanocomposites at Elevated Temperatures.- Tribological Behaviors of Some Materials in Sea Water.- Nanofretting Wear of Monocrystalline Silicon (100) against Spherical SiO2 Tip in Vacuum.- Influence of Surface Finishing Operations on the Reciprocating Sliding Friction and Wear Response of WC Based Cemented Carbides.- Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole Composites.- Friction and Wear Behavior of Laser Cladding NiAl/hBN Self-Lubricating Composite Coating.- Research on the Wear-Resisting Material Produced by Vacuum Evaporation Pattern Casting.- Effect of Surface Topography on Friction and Wear of Cast Iron for Cylinder Liners.- Wear Resistance Analysis of Hardening Materials for Engine Cylinder.- Effects of Speed Sequence on Friction Properties of Sintered Cu-SiO2.- The Fluid Dynamic Lubrication between Tooth Surfaces of High Order Contact.- Study on Friction and Wear Behavior of Glass Fiber and Fly Ash Reinforced MC Nylon Composites.- Experimental Study of Ultrasonic Vibration Assisted Chemical Mechanical Polishing for Sapphire Substrate.- Friction and Wear of the Ceramic Coating Formed on Magnesium Alloy.- Thermal-Mechanical Couple Simulation of Solid Brake Disc in Repeated Braking Cycles.- Preliminary Applications of King’s ART Technology in Industry.- Wear Properties of Potassium Titanate Whiskers Reinforced ZL109 Alloy Composites.- Mineralogical Mechanochemical Agent Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces.- Experiment Research on the Friction Performance of O-Ring with Different Oil Swelling Ratios.- Friction Behaviors of Bushing in Rolling Contact with Shaft and Electroless Ni-PTFE-P or Ni-Al2O3-P Coating.- Nano and Micro Indentation and Scratch Tests of Mechanical Properties of Thin Films.- Synthesis of Nano-MoS2 Particles and Its Role in the Self-Lubrication of Polyacetal-Based Composite.- Analysis of a Three-Body Contacting model with the Adhesive effect.- Analysis of Three-Body Contacting Model with Scale Effect.- Adhesion, Friction and Wear Measurements at Microscale.- Fabrication and Nano-Tribological Behaviors of PDDA/Ag NPs Composite Molecular Deposition Films.- Frequency Shift of Single Walled Carbon Nanotube under Axial Load.- Effect of Heat Treatment on the Nano-Tribological Properties of Ionic Liquid Films.- Analysis on Wafer Tilt Effects in CMP Process.- Size Effects on Friction of C3602 in Cylinder Compression.- Investigation on the Tribological Characteristics of Nano/Micro Solid Anti-Wear Additives in Engine Lubricants.- The Influence of Carbon Nanotubes on the Tribological Behavior and Wear Resistance of a Polyamide Nanocomposite.- Experimental Investigation of the Frictional Behaviors at Particle-Surface Interfaces in CMP Application Using an Atomic Force Microscope.- Finite Element Simulation and Analysis of Nano-Scale Adhesive Contacts.- Nano/Micro-Tribological Properties of Ultrathin Functionalized Imidazolium Ionic Liquid Films on Silicon Wafer.- Micro Asperity Type Induced in Electrostatic Resistance of MEMS.- Experimental Analysis and Numerical Simulation of the Recess Slider in Magnetic Recording System with Ultra-Thin Spacing.- Effect of Solvents on Frictional Properties of Monolayer Lubricant Films Coated on Magnetic Disk Surfaces.- Fly-Ability and Durability Test of Dynamic Fly Height Heads at 1 nm Clearance.- Cavitation Erosion Characteristics of Titanium Alloy Thin Film Prepared by Ion Beam Enhanced Deposition.- Measurements of Vertical Elongation and Adhesive Force of Nanometers-Thick Lubricant Films on Magnetic Disks Using Micro Probe for SPM.- Experimental Research on Boundary Slip of Confined Liquids at Micro/Nano Scale and Effect of Shear Rate and Viscosity.- Study on Micro-Scale Gas Slider Bearing w ith Direct Simulation Monte Carlo Method.- Tribological Behaviors of Self-Assembled Dual-Layer Films in Atmosphere and in Vacuum.- Research on Fractal Contact Model of Cylinders’ Surface.- Friction between Diamond-Like Carbon (DLC) Films—a Molecular Dynamics Study.- Molecular Dynamics Simulations of Atomic-Scale Friction in Diamond-Silver Sliding System.- Molecular Dynamics Study on Carbon Nanotubes Sandwiched between Si Surface.- Tribological Aspects of Nanoimprint Process.- Molecular Dynamic Simulation of Effect of Crystallographic Orientation on Nano-Indentation/Scratching Behaviors of BCC Iron.- 3D Misorientation of Cantilevers and Its Impact in Friction Force Microscopy.- Coupled Simulative Analysis for Drive Characteristic of Micro-Comb Structure.- Relating Friction and Processes Development during Chem...

Dettagli dell?edizione

• Editore: Springer Verlag
• Data di pubblicazione: 2009
• Lingua: Inglese
• ISBN 10: 364203652X
• ISBN 13: 9783642036521
• Rilegatura: Copertina rigida
• Numero di pagine: 1033
• Contatto del produttore: non disponibile
• Persona responsabile: CMN Printpool Inh. Mathis Neumann; https://www.also.com/ec/cms5/en_6000/6000/index.jsp; ; Friedrich-Karl-Str. 9; Hamburg; Germania