Water Analysis: A Practical Guide to Physico-Chemical, Chemical and Microbiological Water Examination and Quality Assurance - Brossura

Brossura

ISBN 10: 3642726127 ISBN 13: 9783642726125

Casa editrice: Springer Nature, 2011

Riassunto

In addition to detailed instructions for sampling and immediate analysis, the book provides a concise presentation of both the theoretical background and data evaluation. The analytical methods thus presented can just as easily be applied using simple equipment as well as in the modern laboratory. <br>The book is a bench-top laboratory manual and as such can be used for instruction in laboratory staff training programs. It treats the analysis of organic and inorganic compounds while also dealing with microbiological problems associated with the guidelines for waste, surface and ground water, as well as drinking water quality.

Su questo libro

Contenuti

1 Introduction, Sampling, Local Testing, etc..- 1.1 General.- 1.1.1 Water resources.- 1.1.2 Water management.- 1.1.3 Water analyses.- 1.2 Local inspection and sampling of water.- 1.2.1 Sampling of water.- 1.2.2 Local investigations.- 1.2.3 Geology and Hydrogeology.- 1.2.4 Technical information on the water resource.- 1.2.5 Possibilities of environmental influences on the water resource.- 1.2.6 Hygienic considerations.- 1.3 Techniques of water sampling.- 1.3.1 General.- 1.3.2 Bottle material.- 1.3.3 Techniques of sampling.- 1.4 Water sampling in practice.- 1.4.1 Local investigations.- 1.4.2 Sampling for microbiological analysis of water.- 1.4.3 Sampling for physico-chemical analyses.- 1.4.4 Sampling for chemical analyses (see also 1.3).- 1.4.5 Water sampling for gas analyses.- 1.4.6 Radioactive inert gases.- 1.5 Special instructions for sampling water of various origins and for various investigation purposes.- 1.5.1 Surface water.- 1.5.2 Ground water.- 1.5.3 Salt water.- 1.5.4 Bathing water.- 1.5.5 Industrial water.- 1.5.6 Irrigation.- 1.5.7 Expanses of water devoted to fish cultivation.- 1.5.8 Waste water.- 1.5.9 Sludge.- 1.6 Local investigations (see also 1.7).- 1.6.1 Preservation of water samples.- 1.6.2 Inorganic substances contained in the water.- 1.6.3 Organic substances contained in the water.- 1.6.4 Radioactivity.- 1.7 Local analyses (see also 1.6).- 1.7.1 Sensory examination on site.- 1.7.2 Colouring.- 1.7.3 Transparency and turbidity.- 1.7.4 Temperature.- 1.7.5 Hydrogen-ion activity (pH) (cf. also Chapter 2).- 1.7.6 Electrical conductivity.- 1.7.7 Redox potential.- 1.7.8 Oxygen (cf. also Section 3.6).- 1.7.9 Ozone.- 1.7.10 Chlorine.- 1.7.11 Determination of chlorine dioxide (ClO2) and chlorite (ClO2?).- 1.7.12 Carbon dioxide (CO2), titrimetric determining process on site (cf. also Section 3.6).- 1.7.13 p- and m-values (acid-base consumption, $$HC{O_{{3^ - }}}$$ and CO32?).- 1.7.14 Corrosive carbonic acid.- 1.7.15 Settleable substances.- 1.7.16 The investigation of wastes and sludges in the context of water pollution.- 1.7.17 The importance of site inspections for biological assessment of water resources (cf. also Section 1.2, 1.4 and 1.5 above).- 2 Theoretical Introduction to Selected Methods of Water Analysis (Classic and Instrumental Methods).- 2.1 Concentration processes such as evaporation, distillation, precipitation, coprecipitation, adsorption, ion exchange and extraction.- 2.1.1 Evaporation.- 2.1.2 Distillation.- 2.1.3 Precipitation.- 2.1.4 Coprecipitation.- 2.1.5 Adsorption and ion exchange.- 2.1.6 Extraction.- 2.1.7 Volumetric analysis.- 2.2 Electrochemical processes of analysis.- 2.2.1 Introduction.- 2.2.2 Coulometry.- 2.2.3 Potentiometry.- 2.2.3.1 Ion-sensitive electrodes.- 2.2.4 Polarography.- 2.3 Spectrophotometry (or photometry).- 2.3.1 Measurable variables of light absorption.- 2.3.2 The Lambert-Beer Law.- 2.3.3 Design and mode of operation of an absorption spectrophotometer.- 2.3.4 Photoelectric photometers.- 2.3.5 Evaluation.- 2.4 Flame-emission spectrophotometry (FES).- 2.4.1 Design of the instrument.- 2.4.2 Evaluation.- 2.5 Emission spectrum analysis.- 2.6 X-ray Fluorescence Analysis.- 2.7 Atomic Absorption Spectrometry (AAS).- 2.7.1 Design of the equipment.- 2.7.2 Scope.- 2.7.3 General aspects of calibration and analysis.- 2.7.4 AAS measurements using the graphite furnace technique.- 2.7.5 Example of an AAS measuring system after Perkin-Elmer.- 2.8 Atomic Emission Spectrometry with Inductively Coupled Plasma Excitation (ICP-AES).- 2.8.1 General.- 2.8.2 Equipment.- 2.8.3 Analytical limits.- 2.9 Fluorescence Spectrometry.- 2.9.1 Equipment.- 2.9.2 Interference.- 2.10 Infrared Spectroscopy.- 2.10.1 General remarks.- 2.10.2 Evaluation of an IR spectrum.- 2.10.3 Preparation and handling of the samples.- 2.11 Chromatographic methods.- 2.11.1 General.- 2.11.2 The main chromatographic techniques used in water analysis.- 2.11.3 General comments on GC-MS techniques in water analysis.- 2.12 Introduction to gas chromatography.- 2.12.1 Principles and definition of the method.- 2.12.2 Structure of gas-chromatographic apparatus.- 2.12.3 Identification of sample components.- 2.12.4 Determination of sample concentrations.- 2.12.5 Sensitivity.- 2.12.6 Speed of analysis and automation.- 2.12.7 Theory of the chromatographic process.- 2.12.8 The separation process.- 2.12.9 General remarks on the formation of the peak shape.- 2.12.10 The partition isotherms.- 2.12.11 Causes of peak broadening.- 2.12.12 The van Deemter equation.- 2.12.13 The number of theoretical plates.- 2.12.14 The efficiency or selectivity of the liquid phase.- 2.12.15 The resolution equation.- 2.12.16 General remarks on GC detectors.- 2.12.16.1 Flame ionization detector (FID).- 2.12.16.2 Electron capture detector (ECD).- 2.12.16.3 Thermionic detector (TSB) and alkali flame ionization detector (AFID).- 2.12.16.4 Flame-photometric detector (FPD).- 2.12.16.5 Thermal conductivity detector.- 2.12.16.6 Microcoulometric detector.- 2.12.16.7 Mass-selective detector.- 2.12.17 Theoretical considerations regarding detectors.- 2.12.17.1 General remarks.- 2.12.17.2 Characteristic parameters of detectors.- 2.13 Gas-chromatographic headspace analysis (cf. also Chapter 4).- 2.13.1 General remarks.- 2.13.2 Area of application.- 2.14 High-performance liquid chromatography (HPLC).- 2.14.1 Basic principles.- 2.14.2 Retention.- 2.14.3 Separation mechanisms.- 2.15 Ion chromatography.- 2.15.1 Ion chromatographs with suppressor.- 2.15.2 Ion chromatography without suppressor.- 2.15.3 Anion separation.- 2.15.4 Examples.- 2.16 Radiochemical analysis of water samples (Introduction).- 2.16.1 General information.- 2.16.2 Types of radiation.- 2.16.3 Radionuclides in water.- 2.16.4 Units of measurement.- 2.16.5 Radioactive decay.- 2.16.6 Enrichment of radionuclides.- 2.16.7 Measuring preparations.- 2.16.8 Total determination.- 2.16.9 Safety regulations.- 2.16.10 Radiation protection.- 2.16.11 Detectors and measuring equipment.- 2.17 Enzymatic Analysis.- 3 Inorganic Parameters.- 3.1 Total parameters.- 3.1.1 Turbidity measurements (see also Section 1.7.5).- 3.1.2 Density.- 3.1.3 Total determination of dissolved and undissolved substances.- 3.1.3.1 Undissolved substances.- 3.1.3.2 Cumulative determination of dissolved substances with cation exchangers.- 3.1.4 Sulphide sulphur (H2S, HS?, S2?) (see also Chapter 1 and Section 3.6).- 3.1.4.1 Iodometric determination of sulphide sulphur.- 3.1.4.2 Spectrophotometric analysis of sulphide sulphur as methylene blue.- 3.1.5 Water “hardness” (see also Chapter 1, and Sections 3.2 and 3.3).- 3.2 Anions.- 3.2.1 Fluoride.- 3.2.1.1 Spectrophotometric determination with lanthanum alizarin complexone, directly or following steam acid distillation.- 3.2.1.2 Determination of the fluoride ion with an ion-selective (ion-sensitive) electrode.- 3.2.1.3 Ion chromatography determination of fluoride ions (see Section 3.2.11).- 3.2.2 Chloride.- 3.2.2.1 Gravimetric determination.- 3.2.2.2 Volumetric determination with silver nitrate (electometric indication).- 3.2.2.3 Volumetric determination with silver nitrate and potassium chromate (visual indication).- 3.2.2.4 Ion chromatography determination (see Section 3.2.11).- 3.2.3 Bromide and iodide.- 3.2.3.1 Consecutive iodometric determination of bromide and iodide in one solution.- 3.2.3.2 Ion chromatography (see Section 3.2.11).- 3.2.4 Nitrite.- 3.2.4.1 Spectrophotometric analysis with sulphanilic acid and 1-naphthylamine.- 3.2.4.2 Ion chromatography (see Section 3.2.11).- 3.2.5 Nitrate.- 3.2.5.1 Spectrophotometric analysis with sodium salicylate.- 3.2.5.2 Nitrate with 2,6-dimethylphenol.- 3.2.5.3 Determination of nitrate after reductive distillation.- 3.2.5.4 Ion chromatography (see Section 3.2.11).- 3.2.6 Sulphite.- 3.2.6.1 Iodometric determination of sulphite.- 3.2.6.2 Gravimetric determination as barium sulphate after distillation.- 3.2.6.3 Polarographic determination of sulphite (including sulphide and thiosulphate).- 3.2.7 Sulphate.- 3.2.7.1 Gravimetric Determination as Barium Sulphate.- 3.2.7.2 Nephelometric Determination of Sulphate.- 3.2.7.3 Ion chromatography (see Section 3.2.11).- 3.2.8 Phosphate.- 3.2.8.1 Orthophosphate (calculated as hydrogen phosphate).- 3.2.8.2 Sum of orthophosphate and hydrolyzable phosphorus compounds.- 3.2.8.3 Total phosphorus.- 3.2.8.4 Phosphate determination using ion chromatography (see Section 3.2.11).- 3.2.8.5 ICP-AES (see Section 3.3.12).- 3.2.9 Carbonic acid, hydrogen carbonate and carbonate (see also Chapter 1 and Section 3.6).- 3.2.9.1 Acid consumption (alkalinity).- 3.2.9.2 Acid consumption and base consumption (p and m value).- 3.2.9.3 Acidimetric determination of carbonate ions and hydrogen carbonate ions (p and m values).- 3.2.9.4 Base comsumption (acidity).- 3.2.10 Total carbon dioxide (see also 3.6, carbon dioxide).- 3.2.10.1 Calculation of Sc (diss. CO2) from the p and m value.- 3.2.10.2 Volumetric determination after distillation.- 3.2.10.3 Gravimetric determination after distillation.- 3.2.11 Ion Chromatography of seven anions.- 3.3 Cations.- 3.3.1 Lithium.- 3.3.1.1 Determination by flame photometry.- 3.3.1.2 Direct determination of lithium by means of atomic-absorption analysis.- 3.3.1.3 Lithium determination with the graphite tube technique (Furnace method).- 3.3.2 Sodium.- 3.3.2.1 Flame photometry.- 3.3.2.2 Direct determination of sodium by means of atomic-absorption analysis.- 3.3.2.3 ICP-AES (see Section 3.3.12).- 3.3.3 Potassium.- 3.3.3.1 Determination by flame photometry.- 3.3.3.2 Direct determination of potassium by means of atomic-absorption analysis.- 3.3.3.3 ICP-AES (see Section 3.3.12).- 3.3.4 Rubidium and caesium.- 3.3.4.1 Determination by flame photometry.- 3.3.4.2 Determination of rubidium and caesium in water samples by means of AAS.- 3.3.4.3 Direct determination of rubidium by means of atomic-absorption analysis.- 3.3.4.4 Direct determination of caesium by means of atomic-absorption analysis.- 3.3.4.5 Basis of the method of concentration.- 3.3.5 Ammonium (ammonia).- 3.3.5.1 Photometric determination of NH4+ as indophenol.- 3.3.5.2 Acidimetric determination of NH4+ or NH3 after distillation.- 3.3.6 Magnesium.- 3.3.6.1 Direct determination of magnesium by means of atomic-absorption analysis.- 3.3.6.2 Complexometric analysis (see Calcium, Section 3.3.7).- 3.3.6.3 ICP-AES (see Section 3.3.12).- 3.3.7 Calcium.- 3.3.7.1 Direct determination of calcium by means of atomic-absorption analysis..- 3.3.7.2 Chelatometric determination of calcium ions and magnesium ions.- 3.3.7.3 ICP-AES (see Section 3.3.12).- 3.3.8 Strontium.- 3.3.8.1 Direct determination by means of atomic-absorption analysis.- 3.3.8.2 Determination by flame photometry.- 3.3.8.3 ICP-AES (see Section 3.3.12).- 3.3.9 Barium.- 3.3.9.1 Direct determination of barium by means of atomic-absorption analysis.- 3.3.9.2 Method of enrichment of barium.- 3.3.9.3 Barium determination with the graphite tube technique (Furnace method).- 3.3.9.4 ICP-AES (see Section 3.3.12).- 3.3.10 Iron.- 3.3.10.1 Direct determination of iron by means of atomic-absorption analysis.- 3.3.10.2 Iron determination with the graphite tube technique (Furnace method).- 3.3.10.3 Spectrophotometric determination of iron (II) ions with 2,2’-bipyridyl (Fresenius-Schneider).- 3.3.10.4 Spectrophotometric determination of total iron with 2,2’-bipyridyl.- 3.3.10.5 Spectrophotometric determination of total iron with thioglycolic acid.- 3.3.10.6 ICP-AES (see Section 3.3.12).- 3.3.11 Manganese.- 3.3.11.1 Direct determination of manganese by means of atomic-absorption analysis.- 3.3.11.2 Manganese determination with the graphite tube technique (Furnace method).- 3.3.11.3 Spectrophotometric determination as permanganate following oxidation by peroxodisulphate.- 3.3.11.4 ICP-AES (see Section 3.3.12).- 3.3.12 Atomic-emission spectrometry with inductively coupled plasma (ICP-AES, see also Chapter 2).- 3.4 Trace substances (inorganic) (For ICP-AES determination of 24 elements see Section 3.3.12).- 3.4.1 Trace detection of elements in parallel by emission spectrography survey analysis (see also Chapter 2).- 3.4.1.1 Concentration by trace precipitation.- 3.4.1.2 Concentration by extraction.- 3.4.2 Aluminium.- 3.4.2.1 Direct determination by means of atomic-absorption analysis.- 3.4.2.2 Aluminium determination with the graphite tube technique (Furnace method).- 3.4.2.3 Spectrophotometric determination with eriochromcyanine R.- 3.4.3 Arsenic.- 3.4.3.1 Determination of arsenic using the hydride AAS technique.- 3.4.3.2 Spectrophotometric determination of total arsenic with silver diethyl dithiocarbamate.- 3.4.3.3 Iodometric determination of arsenic (III).- 3.4.3.4 Separating arsenic (III) and arsenic (V).- 3.4.4 Antimony.- 3.4.4.1 Determination of antimony using the hydride AAS technique.- 3.4.4.2 Spectrophotometric determination with rhodamine B.- 3.4.5 Beryllium.- 3.4.5.1 Direct determination by means of atomic-absorption analysis.- 3.4.5.2 Basis of the method of concentration.- 3.4.5.3 Beryllium determination with the graphite tube technique (Furnace method).- 3.4.5.4 Spectrophotometric determination using chromazurol S.- 3.4.6 Lead.- 3.4.6.1 Spectrophotometric determination of lead with dithizone.- 3.4.6.2 Direct determination by means of atomic-absorption analysis.- 3.4.6.3 Basis of the method of concentration.- 3.4.6.4 Lead determination with the graphite tube technique (Furnace method).- 3.4.6.5 ICP-AES see Section 3.3.12.- 3.4.7 Cadmium.- 3.4.7.1 Direct determination by means of atomic-absorption analysis.- 3.4.7.2 Cadmium determination with the graphite tube technique (Furnace method).- 3.4.7.3 Spectrophotometric determination of cadmium with dithizone.- 3.4.7.4 ICP-AES see Section 3.3.12.- 3.4.8 Chromium.- 3.4.8.1 Direct determination by means of atomic-absorption analysis.- 3.4.8.2 Total chromium.- 3.4.8.3 Determination of hexavalent chromium.- 3.4.8.4 Chromium determination with the graphite tube technique (Furnace method).- 3.4.8.5 Photometric determination of total chromium using diphenyl carbazide.- 3.4.8.6 ICP-AES (see Section 3.3.12).- 3.4.9 Germanium.- 3.4.9.1 Determination of germanium by emission spectrography.- 3.4.9.2 Determination of germanium using graphite-tube AAS technique.- 3.4.10 Cobalt.- 3.4.10.1 Spectrophotometric determination as thiocyanate/tetraphenyl arsonium complex.- 3.4.10.2 Direct determination of cobalt by means of atomic-absorption flame analysis.- 3.4.10.3 Cobalt determination with the graphite tube technique (Furnace method).- 3.4.10.4 ICP-AES see Section 3.3.12.- 3.4.11 Copper.- 3.4.11.1 Direct determination by means of atomic-absorption flame analysis.- 3.4.11.2 Copper determination with the graphite-tube technique (Furnace method).- 3.4.11.3 Spectrophotometric determination using NaDDTC.- 3.4.11.4 ICP-AES see Section 3.3.12.- 3.4.12 Molybdenum.- 3.4.12.1 Spectrophotometric determination as a molybdenum (V) thiocyanate complex.- 3.4.12.2 Direct determination of molybdenum by means of atomic-absorption flame analysis.- 3.4.12.3 Principle of the method of extractive concentration.- 3.4.12.4 ICP-AES see Section 3.3.12.- 3.4.13 Nickel.- 3.4.13.1 Spectrophotometric determination with diacetyl dioxime (dimethylglyoxime).- 3.4.13.2 Direct determination by means of atomic-absorption flame analysis.- 3.4.13.3 Method with concentration.- 3.4.13.4 Nickel determination with the graphite tube technique (Furnace method).- 3.4.13.5 ICP-AES see Section 3.3.12.- 3.4.14 Mercury.- 3.4.14.1 Mercury AAS with cold vapour method.- 3.4.15 Selenium.- 3.4.15.1 Determination of selenium using the hydride AAS technique.- 3.4.15.2 Spectrophotometric determination of selenium with o-phenylenediamine.- 3.4.16 Silver.- 3.4.16.1 Direct determination of silver by means of atomic absorption flame analysis.- 3.4.16.2 Silver determination with the graphite tube technique (Furnace method).- 3.4.16.3 Spectrophotometric determination with dithizone.- 3.4.16.4 ICP-AES (see Section 3.3.12).- 3.4.17 Thallium.- 3....

Dettagli dell?edizione

• Editore: Springer Nature
• Data di pubblicazione: 2011
• Lingua: Inglese
• ISBN 10: 3642726127
• ISBN 13: 9783642726125
• Rilegatura: Copertina flessibile
• Numero di pagine: 804
• Redattore: Fresenius W., Quentin K. E., Schneider W.
• Contatto del produttore: non disponibile
• Persona responsabile: CMN Printpool Inh. Mathis Neumann; https://www.also.com/ec/cms5/en_6000/6000/index.jsp; ; Friedrich-Karl-Str. 9; Hamburg; Germania