Compound Semiconductors Strained Layers and Devices
. Ed(s): Willander, Magnus; Jain, Suresh C.; Overstraeten, R. Van
ISBN 10: 1461370000 ISBN 13: 9781461370000
Editore: Springer-Verlag New York Inc., 2014
Nuovi
Brossura
Da
Kennys Bookstore, Olney, MD, U.S.A.
Valutazione del venditore 5 su 5 stelle
Venditore AbeBooks dal 9 ottobre 2009
Questo articolo specifico non è più disponibile.
Riguardo questo articolo
Descrizione:
Editor(s): Willander, Magnus; Jain, Suresh C.; Overstraeten, R. Van. Series: Electronic Materials Series. Num Pages: 349 pages, 8 black & white illustrations, biography. BIC Classification: TGMT; TJFD5. Category: (P) Professional & Vocational. Dimension: 235 x 155 x 19. Weight in Grams: 539. . 2014. Paperback. . . . . Books ship from the US and Ireland. Codice articolo V9781461370000
Riassunto:
During the last 25 years (after the growth of the first pseudomorphic GeSi strained layers on Si by Erich Kasper in Germany) we have seen a steady accu mulation of new materials and devices with enhanced performance made pos sible by strain. 1989-1999 have been very good years for the strained-Iayer devices. Several breakthroughs were made in the growth and doping technology of strained layers. New devices were fabricated as a results of these break throughs. Before the advent of strain layer epitaxy short wavelength (violet to green) and mid-IR (2 to 5 f. Lm) regions of the spectrum were not accessi ble to the photonic devices. Short wavelength Light Emitting Diodes (LEDs) and Laser Diodes (LDs) have now been developed using III-Nitride and II-VI strained layers. Auger recombination increases rapidly as the bandgap narrows and temperature increases. Therefore it was difficult to develop mid-IR (2 to 5 f. Lm range) lasers. The effect of strain in modifying the band-structure and suppressing the Auger recombination has been most spectacular. It is due to the strain mediated band-structure engineering that mid-IR lasers with good per formance have been fabricated in several laboratories around the world. Many devices based on strained layers have reached the market place. This book de scribes recent work on the growth, characterization and properties o(compound semiconductors strained layers and devices fabricated using them.
Contenuti: Preface. 1. Introduction. 2. Characterization and growth. 3. Strain and critical thickness. 4. Strain relaxation and defects. 5. Band structure and optical properties. 6. Electrical and magnetic properties. 7. Strained layer optoelectronic devices. 8. Transistors. 9. Summary and conclusions. Appendix A. Bibliography. Index.
Le informazioni nella sezione "Su questo libro" possono far riferimento a edizioni diverse di questo titolo.
Dati bibliografici
Titolo: Compound Semiconductors Strained Layers and ...
Casa editrice: Springer-Verlag New York Inc.
Data di pubblicazione: 2014
Legatura: Brossura
Condizione: New
I migliori risultati di ricerca su AbeBooks
Immagini fornite dal venditore
Compound Semiconductors Strained Layers and Devices
Print on DemandDa: moluna, Greven, Germania
Valutazione del venditore 4 su 5 stelle
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Preface. 1. Introduction. 2. Characterization and growth. 3. Strain and critical thickness. 4. Strain relaxation and defects. 5. Band structure and optical properties. 6. Electrical and magnetic properties. 7. Strained layer optoelectronic devices. 8. T. Codice articolo 4195150
Quantità: Più di 20 disponibili
Foto dell'editore
Compound Semiconductors Strained Layers and Devices (Paperback)
Editore:
Springer-Verlag New York Inc., New York, NY, 2014
ISBN 10: 1461370000
ISBN 13: 9781461370000
Nuovo
Paperback
Da: Grand Eagle Retail, Bensenville, IL, U.S.A.
Valutazione del venditore 5 su 5 stelle
Paperback. Condizione: new. Paperback. During the last 25 years (after the growth of the first pseudomorphic GeSi strained layers on Si by Erich Kasper in Germany) we have seen a steady accu- mulation of new materials and devices with enhanced performance made pos- sible by strain. 1989-1999 have been very good years for the strained-Iayer- devices. Several breakthroughs were made in the growth and doping technology of strained layers. New devices were fabricated as a results of these break- throughs. Before the advent of strain layer epitaxy short wavelength (violet to green) and mid-IR (2 to 5 f. Lm) regions of the spectrum were not accessi- ble to the photonic devices. Short wavelength Light Emitting Diodes (LEDs) and Laser Diodes (LDs) have now been developed using III-Nitride and II-VI strained layers. Auger recombination increases rapidly as the bandgap narrows and temperature increases. Therefore it was difficult to develop mid-IR (2 to 5 f. Lm range) lasers. The effect of strain in modifying the band-structure and suppressing the Auger recombination has been most spectacular.It is due to the strain mediated band-structure engineering that mid-IR lasers with good per- formance have been fabricated in several laboratories around the world. Many devices based on strained layers have reached the market place. This book de- scribes recent work on the growth, characterization and properties o(compound semiconductors strained layers and devices fabricated using them. During the last 25 years (after the growth of the first pseudomorphic GeSi strained layers on Si by Erich Kasper in Germany) we have seen a steady accuA mulation of new materials and devices with enhanced performance made posA sible by strain. 1989-1999 have been very good years for the strained-IayerA devices. Several breakthroughs were made in the growth and doping technology of strained layers. New devices were fabricated as a results of these breakA throughs. Before the advent of strain layer epitaxy short wavelength (violet to green) and mid-IR (2 to 5 f. Lm) regions of the spectrum were not accessiA ble to the photonic devices. Short wavelength Light Emitting Diodes (LEDs) and Laser Diodes (LDs) have now been developed using III-Nitride and II-VI strained layers. Auger recombination increases rapidly as the bandgap narrows and temperature increases. Therefore it was difficult to develop mid-IR (2 to 5 f. Lm range) lasers. The effect of strain in modifying the band-structure and suppressing the Auger recombination has been most spectacular. It is due to the strain mediated band-structure engineering that mid-IR lasers with good perA formance have been fabricated in several laboratories around the world. Many devices based on strained layers have reached the market place. This book deA scribes recent work on the growth, characterization and properties o(compound semiconductors strained layers and devices fabricated usin Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Codice articolo 9781461370000
Quantità: 1 disponibili
Foto dell'editore
Compound Semiconductors Strained Layers and Devices (Electronic Materials Series, 7)
Da: Lucky's Textbooks, Dallas, TX, U.S.A.
Valutazione del venditore 5 su 5 stelle
Condizione: New. Codice articolo ABLIING23Mar2716030033514
Quantità: Più di 20 disponibili
Immagini fornite dal venditore
Compound Semiconductors Strained Layers and Devices
Editore:
Springer US, Springer New York Mär 2014, 2014
ISBN 10: 1461370000
ISBN 13: 9781461370000
Nuovo
Taschenbuch
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -During the last 25 years (after the growth of the first pseudomorphic GeSi strained layers on Si by Erich Kasper in Germany) we have seen a steady accu mulation of new materials and devices with enhanced performance made pos sible by strain. 1989-1999 have been very good years for the strained-Iayer devices. Several breakthroughs were made in the growth and doping technology of strained layers. New devices were fabricated as a results of these break throughs. Before the advent of strain layer epitaxy short wavelength (violet to green) and mid-IR (2 to 5 f. Lm) regions of the spectrum were not accessi ble to the photonic devices. Short wavelength Light Emitting Diodes (LEDs) and Laser Diodes (LDs) have now been developed using III-Nitride and II-VI strained layers. Auger recombination increases rapidly as the bandgap narrows and temperature increases. Therefore it was difficult to develop mid-IR (2 to 5 f. Lm range) lasers. The effect of strain in modifying the band-structure and suppressing the Auger recombination has been most spectacular. It is due to the strain mediated band-structure engineering that mid-IR lasers with good per formance have been fabricated in several laboratories around the world. Many devices based on strained layers have reached the market place. This book de scribes recent work on the growth, characterization and properties o(compound semiconductors strained layers and devices fabricated using them.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 352 pp. Englisch. Codice articolo 9781461370000
Quantità: 1 disponibili
Foto dell'editore
Compound Semiconductors Strained Layers and Devices (Electronic Materials Series, 7)
Da: Ria Christie Collections, Uxbridge, Regno Unito
Valutazione del venditore 5 su 5 stelle
Condizione: New. In. Codice articolo ria9781461370000_new
Quantità: Più di 20 disponibili
Immagini fornite dal venditore
Compound Semiconductors Strained Layers and Devices
Editore:
Springer US, Springer New York, 2014
ISBN 10: 1461370000
ISBN 13: 9781461370000
Nuovo
Taschenbuch
Da: AHA-BUCH GmbH, Einbeck, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - During the last 25 years (after the growth of the first pseudomorphic GeSi strained layers on Si by Erich Kasper in Germany) we have seen a steady accu mulation of new materials and devices with enhanced performance made pos sible by strain. 1989-1999 have been very good years for the strained-Iayer devices. Several breakthroughs were made in the growth and doping technology of strained layers. New devices were fabricated as a results of these break throughs. Before the advent of strain layer epitaxy short wavelength (violet to green) and mid-IR (2 to 5 f. Lm) regions of the spectrum were not accessi ble to the photonic devices. Short wavelength Light Emitting Diodes (LEDs) and Laser Diodes (LDs) have now been developed using III-Nitride and II-VI strained layers. Auger recombination increases rapidly as the bandgap narrows and temperature increases. Therefore it was difficult to develop mid-IR (2 to 5 f. Lm range) lasers. The effect of strain in modifying the band-structure and suppressing the Auger recombination has been most spectacular. It is due to the strain mediated band-structure engineering that mid-IR lasers with good per formance have been fabricated in several laboratories around the world. Many devices based on strained layers have reached the market place. This book de scribes recent work on the growth, characterization and properties o(compound semiconductors strained layers and devices fabricated using them. Codice articolo 9781461370000
Quantità: 1 disponibili
Immagini fornite dal venditore
Compound Semiconductors Strained Layers and Devices
Print on DemandDa: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -During the last 25 years (after the growth of the first pseudomorphic GeSi strained layers on Si by Erich Kasper in Germany) we have seen a steady accu mulation of new materials and devices with enhanced performance made pos sible by strain. 1989-1999 have been very good years for the strained-Iayer devices. Several breakthroughs were made in the growth and doping technology of strained layers. New devices were fabricated as a results of these break throughs. Before the advent of strain layer epitaxy short wavelength (violet to green) and mid-IR (2 to 5 f. Lm) regions of the spectrum were not accessi ble to the photonic devices. Short wavelength Light Emitting Diodes (LEDs) and Laser Diodes (LDs) have now been developed using III-Nitride and II-VI strained layers. Auger recombination increases rapidly as the bandgap narrows and temperature increases. Therefore it was difficult to develop mid-IR (2 to 5 f. Lm range) lasers. The effect of strain in modifying the band-structure and suppressing the Auger recombination has been most spectacular. It is due to the strain mediated band-structure engineering that mid-IR lasers with good per formance have been fabricated in several laboratories around the world. Many devices based on strained layers have reached the market place. This book de scribes recent work on the growth, characterization and properties o(compound semiconductors strained layers and devices fabricated using them. 352 pp. Englisch. Codice articolo 9781461370000
Quantità: 2 disponibili
Foto dell'editore
Compound Semiconductors Strained Layers and Devices (Electronic Materials Series)
Da: Revaluation Books, Exeter, Regno Unito
Valutazione del venditore 5 su 5 stelle
Paperback. Condizione: Brand New. 349 pages. 9.30x6.20x0.80 inches. In Stock. Codice articolo x-1461370000
Quantità: 2 disponibili
Foto dell'editore
Compound Semiconductors Strained Layers and Devices (Paperback)
Editore:
Springer-Verlag New York Inc., New York, NY, 2014
ISBN 10: 1461370000
ISBN 13: 9781461370000
Nuovo
Paperback
Da: AussieBookSeller, Truganina, VIC, Australia
Valutazione del venditore 5 su 5 stelle
Paperback. Condizione: new. Paperback. During the last 25 years (after the growth of the first pseudomorphic GeSi strained layers on Si by Erich Kasper in Germany) we have seen a steady accu- mulation of new materials and devices with enhanced performance made pos- sible by strain. 1989-1999 have been very good years for the strained-Iayer- devices. Several breakthroughs were made in the growth and doping technology of strained layers. New devices were fabricated as a results of these break- throughs. Before the advent of strain layer epitaxy short wavelength (violet to green) and mid-IR (2 to 5 f. Lm) regions of the spectrum were not accessi- ble to the photonic devices. Short wavelength Light Emitting Diodes (LEDs) and Laser Diodes (LDs) have now been developed using III-Nitride and II-VI strained layers. Auger recombination increases rapidly as the bandgap narrows and temperature increases. Therefore it was difficult to develop mid-IR (2 to 5 f. Lm range) lasers. The effect of strain in modifying the band-structure and suppressing the Auger recombination has been most spectacular.It is due to the strain mediated band-structure engineering that mid-IR lasers with good per- formance have been fabricated in several laboratories around the world. Many devices based on strained layers have reached the market place. This book de- scribes recent work on the growth, characterization and properties o(compound semiconductors strained layers and devices fabricated using them. During the last 25 years (after the growth of the first pseudomorphic GeSi strained layers on Si by Erich Kasper in Germany) we have seen a steady accuA mulation of new materials and devices with enhanced performance made posA sible by strain. 1989-1999 have been very good years for the strained-IayerA devices. Several breakthroughs were made in the growth and doping technology of strained layers. New devices were fabricated as a results of these breakA throughs. Before the advent of strain layer epitaxy short wavelength (violet to green) and mid-IR (2 to 5 f. Lm) regions of the spectrum were not accessiA ble to the photonic devices. Short wavelength Light Emitting Diodes (LEDs) and Laser Diodes (LDs) have now been developed using III-Nitride and II-VI strained layers. Auger recombination increases rapidly as the bandgap narrows and temperature increases. Therefore it was difficult to develop mid-IR (2 to 5 f. Lm range) lasers. The effect of strain in modifying the band-structure and suppressing the Auger recombination has been most spectacular. It is due to the strain mediated band-structure engineering that mid-IR lasers with good perA formance have been fabricated in several laboratories around the world. Many devices based on strained layers have reached the market place. This book deA scribes recent work on the growth, characterization and properties o(compound semiconductors strained layers and devices fabricated usin Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability. Codice articolo 9781461370000
Quantità: 1 disponibili