Liquid Propellant Rocket Engine Design Handbook (Paperback)

Paperback. Thermodynamics, combustion chemistry, structural mechanics, fluid machinery, and controls are usually taught as separate engineering subjects, each with its own notation and assumptions. A real liquid propellant rocket engine does not respect that separation: chamber pressure, wall thickness, cooling-channel geometry, and turbopump discharge pressure are all tied to the same handful of decisions, made at the same time.An engineer moving from a set of mission requirements to a sized thrust chamber, an injector pattern, and a working turbopump usually has to reassemble that fragmented knowledge alone, often for the first time, on the job. This handbook was built to close that gap. It develops liquid propellant rocket engine design as one connected discipline, in a single design thread, one consistent set of symbols, units, and assumptions, from the fundamental thrust equation through chamber sizing, injector design, cooling, structural analysis, turbopump selection, and full-engine integration. Each of its sixteen chapters opens with learning objectives, develops theory from first principles, and applies it in two to three complete worked examples carried to a checked final answer, followed by five to ten practice problems with verified answers.With this handbook, you will be able to: Trace every governing equation, from the thrust equation and specific impulse through nozzle expansion and turbopump power balance, back to the physical reasoning that produced it, and apply the Tsiolkovsky rocket equation to connect performance to vehicle delta-v.Select a propellant combination and mixture ratio, size a thrust chamber and nozzle contour, and design an injector pattern, evaluating droplet size and atomization quality against combustion stability requirements.Design a regenerative, film, or ablative cooling system against predicted gas-side heat flux, then carry the resulting wall temperature into a structural margin-of-safety calculation for the chamber wall.Size a centrifugal pump and turbine pair for a required head, flow rate, and power balance, evaluating cavitation margin and comparing turbine architectures within an integrated turbopump.Select an engine power cycle, gas-generator, staged-combustion, expander, or pressure-fed, by computing a cycle power balance appropriate to a given mission.Plan a test campaign, reconstruct thrust and specific impulse from instrumentation data, and apply a reliability and margin philosophy tying every subsystem decision into one integrated design.Key topics include propulsion fundamentals and the thrust equation, combustion thermodynamics and nozzle flow, propellant selection and mixture ratio, nozzle contour design, chamber sizing, combustion stability, injector design, thrust chamber cooling, structural analysis of the chamber wall, pump and turbine design, turbopump integration, engine power cycles, ignition and control systems, testing and verification, and systems integration, reliability, and current design trends including additive manufacturing and methalox propellants. A consolidated glossary and reference appendices support the worked examples throughout.This handbook is written for the engineering student finishing a propulsion design sequence, the early-career propulsion engineer connecting coursework to an actual chamber and turbopump, and the practicing engineer moving into liquid rocket propulsion from an adjacent discipline. Readers should be comfortable with undergraduate thermodynamics and fluid mechanics; no prior propulsion-specific background is assumed.Begin building a single, connected understanding of how a liquid propellant rocket engine is sized, cooled, and integrated, with a reference organized around how these systems are actually designed, from first Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.…