Micro-electrode-dot-array Digital Micro
Li Zipeng
Venduto da Kennys Bookstore, Olney, MD, U.S.A.
Venditore AbeBooks dal 9 ottobre 2009
Nuovi - Rilegato
Condizione: Nuovo
Spedito in U.S.A.
Quantità: 15 disponibili
Aggiungere al carrelloVenduto da Kennys Bookstore, Olney, MD, U.S.A.
Venditore AbeBooks dal 9 ottobre 2009
Condizione: Nuovo
Quantità: 15 disponibili
Aggiungere al carrelloCodice articolo V9783030029630
This book provides an insightful guide to the design, testing and optimization of micro-electrode-dot-array (MEDA) digital microfluidic biochips. The authors focus on the characteristics specific for MEDA biochips, e.g., real-time sensing and advanced microfluidic operations like lamination mixing and droplet shape morphing. Readers will be enabled to enhance the automated design and use of MEDA and to develop a set of solutions to facilitate the full exploitation of design complexities that are possible with standard CMOS fabrication techniques. The book provides the first set of design automation and test techniques for MEDA biochips. The methods described in this book have been validated using fabricated MEDA biochips in the laboratory. Readers will benefit from an in-depth look at the MEDA platform and how to combine microfluidics with software, e.g., applying biomolecular protocols to software-controlled and cyberphysical microfluidic biochips.
Zipeng Li received the bachelor’s degree in microelectronics from the Harbin Institute of Technology, Harbin, China, in 2013, and the master’s and Ph.D. degrees in computer engineering from Duke University, Durham, NC, USA, in 2015 and 2017, respectively. Dr. Li is currently a Senior DFT Engineer with Intel Corporation, Santa Clara, CA, USA. His current research interests include design automation for biochips, design-for-test, 2.5-D/3-D ICs, and mixed-technology microsystems.
Krishnendu Chakrabarty received the B. Tech. degree from the Indian Institute of Technology, Kharagpur, in 1990, and the M.S.E. and Ph.D. degrees from the University of Michigan, Ann Arbor, in 1992 and 1995, respectively. He is now the William H. Younger Distinguished Professor and Department Chair of Electrical and Computer Engineering, and Professor of Computer Science, at Duke University.
Prof. Chakrabarty is a recipient of the National Science Foundation CAREER award, the Office of Naval Research Young Investigator Award, the Humboldt Research Award from the Alexander von Humboldt Foundation, Germany, the IEEE Transactions on CAD Donald O. Pederson Best Paper Award (2015), the ACM Transactions on Design Automation of Electronic Systems Best Paper Award (2017), and over a dozen best paper awards at major conferences. He is also a recipient of the IEEE Computer Society Technical Achievement Award (2015), the IEEE Circuits and Systems Society Charles A. Desoer Technical Achievement Award (2017), the Semiconductor Research Corporation Technical Excellence Award (2018), and the Distinguished Alumnus Award from the Indian Institute of Technology, Kharagpur (2014). He is a Hans Fischer Senior Fellow at the Institute for Advanced Study, Technical University of Munich, Germany. He is a 2018 recipient of the Japan Society for the Promotion of Science (JSPS) Fellowship in the “Short Term S: Nobel Prize Level” category.
Prof. Chakrabarty’s current research projects include: testing and design-for-testability of integrated circuits and systems; digital microfluidics, biochips, and cyberphysical systems; data analytics for fault diagnosis, failure prediction, anomaly detection, and hardware security; neuromorphic computing systems. He is a Fellow of ACM, a Fellow of IEEE, and a Golden Core Member of the IEEE Computer Society.
Tsung-Yi Ho received the Ph.D. degree in electrical engineering from National Taiwan University, Taipei, Taiwan, in 2005. He is a Professor with the Department of Computer Science, National Tsing Hua University, Hsinchu, Taiwan. His current research interests include design automation and test for microfluidic biochips and nanometer integrated circuits. He has presented 10 tutorials and contributed 11 special sessions in ACM/IEEE conferences, all in design automation for microfluidic biochips.
Prof. Ho was a recipient of the Invitational Fellowship of the Japan Society for the Promotion of Science, the Humboldt Research Fellowship by the Alexander von Humboldt Foundation, the Hans Fischer Fellow by the Institute of Advanced Study of the Technical University of Munich, the best paper awards at the VLSI Test Symposium in 2013, and the IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS in 2015. He is an Associate Editor of the ACM Journal on Emerging Technologies in Computing Systems, ACM Transactions on Design Automation of Electronic Systems, ACM Transactions on Embedded Computing Systems, the IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS, and the IEEE TRANSACTIONS ON VERY LARGE SCALE INTEGRATION SYSTEMS. He served as a Distinguished Visitor of the IEEE Computer Society for 2013 to 2015, the Chair of the IEEE Computer Society Tainan Chapter for 2013 to 2015, and the Chair of the ACM SIGDA Taiwan Chapter for 2014 to 2015. He currently serves as an ACM Distinguished Speaker, a Distinguished Lecturer of the IEEE Circuits and Systems Society, and the Technical Program Committees of major conferences, including DAC, International Conference on Computer-Aided Design, Design, Automation & Test in Europe Conference, Asia and South Pacific Design Automation Conference, International Symposium on Physical Design, and International Conference on Computer Design.
Chen-Yi Lee received the B.S. degree in electrical engineering from National Chiao Tung University (NCTU), Hsinchu, Taiwan, in 1982 and the M.S. and Ph.D. degrees in electrical engineering from Katholieke University Leuven, Leuven, Belgium, in 1986 and 1990, respectively. From 1986 to 1990, he was with IMEC/VSDM, Leuven, researching in the area of architecture syn- thesis for DSP. In 1991, he joined the Department of Electronics Engineering and from 2003 to 2006. From 2000 to 2003, he was the Director of National CHIP Implementation Center and the Co-Ordinator of Microelectronics Program of Engineering Division, National Security Council, Taipei, Taiwan. He was the Dean of office of research and development from 2007 to 2010, NCTU. He currently serves as the Co-Program Director of National Program of Intelligent Electronics and a Professor of the Department of Electronics Engineering, NCTU. His current research interests include very large scale integration (VLSI) algorithms and architectures for high- throughput DSP applications. He is also active in various aspects of micro sensing, low-power system-on-chip, and deep learning.
Prof. Lee was a recipient of the Outstanding Technology Licensing Award from National Science Council in 2007 and 2008, the Industry Contribution Award from Ministry of Economic Affairs, and the Outstanding Research Award from National Science Council in 2009. He served as the Program Committee Member of IEEE International Solid-State Circuits Conference in 2004–2006, Design, Automation & Test in Europe Conference TPC Member in 2006 and 2007, IEEE Asian Solid-State Circuits Conference TPC Member in 2006–2014, IEEE VLSI Symposium Committee Member in 2010–2014, IEEE Transactions on Circuits and Systems-II Associate Editor in 2010 and 2011, and the Past-Chair of Taipei Chapter of IEEE Circuits and Systems Society.
Le informazioni nella sezione "Su questo libro" possono far riferimento a edizioni diverse di questo titolo.
Visita la pagina della libreria
We guarantee the condition of every book as it's described on the Abebooks websites.
If you're dissatisfied with your purchase (Incorrect Book/Not as Described/Damaged) or if the order hasn't arrived, you're eligible for a refund within 30 days of the estimated delivery date.
For any queries please use the contact seller link or send an email to books@kennys.ie
Conor Kenny
Se sei un consumatore puoi recedere dal contratto in conformità con quanto segue. Per Consumatore si intende qualsiasi persona fisica che agisce per scopi estranei alla propria attività commerciale, imprenditoriale, artigianale o professionale.
Informazioni sul diritto di recesso
Diritto legale di recesso
Hai il diritto di recedere dal presente contratto entro 14 giorni senza fornire alcuna motivazione.
Il periodo di recesso scade dopo 14 giorni dal giorno in cui tu o una terza parte, diversa dal vettore e da te indicata, acquisisce il possesso fisico dell'ultimo bene o dell'ultimo lotto o pezzo.
Per esercitare il diritto di recesso, compila e invia elettronicamente una dichiarazione esplicita sul nostro sito Web, alla voce “I miei acquisti” nella sezione “Mio account”. Ti comunicheremo senza indugio una conferma di ricezione di tale recesso su un supporto durevole (ad es. via e-mail).
Per rispettare il termine di recesso, è sufficiente inviare la comunicazione relativa all'esercizio del diritto di recesso prima della scadenza del periodo di recesso stesso.
Effetti del recesso
In caso di recesso dal presente contratto, ti rimborseremo tutti i pagamenti ricevuti, compresi i costi di spedizione (ad eccezione dei costi supplementari derivanti dalla tua eventuale scelta di un tipo di spedizione diverso dal tipo meno costoso di consegna standard da noi offerto).
Potremo effettuare una detrazione dal rimborso per la perdita di valore dei beni forniti, qualora tale perdita sia il risultato di una manipolazione non necessaria da parte tua.
Eseguiremo il rimborso senza indebito ritardo e non oltre 14 giorni dal giorno in cui saremo informati della tua decisione di recedere dal presente contratto.
Il rimborso sarà effettuato utilizzando lo stesso mezzo di pagamento da te usato per la transazione iniziale, salvo che tu non abbia espressamente concordato altrimenti; in ogni caso, non dovrai sostenere alcun costo quale conseguenza di tale rimborso.
Possiamo trattenere il rimborso finché non avremo ricevuto i beni oppure finché non avrai fornito la prova di averli rispediti, a seconda di quale condizione si verifichi per prima.
Dovrai rispedire i beni o consegnarli a Kennys Bookstore, Olney, Maryland, U.S.A., senza indebito ritardo e, in ogni caso, entro 14 giorni dal giorno in cui ci hai comunicato la tua volontà di recedere dal presente contratto. Il termine è rispettato se rispedisci i beni prima della scadenza del periodo di 14 giorni. I costi diretti della restituzione dei beni saranno a tuo carico. Sei responsabile solo della diminuzione del valore dei beni risultante da una manipolazione diversa da quella necessaria per stabilire la natura, le caratteristiche e il funzionamento dei beni stessi.
Eccezioni al diritto di recesso
Il diritto di recesso non si applica a:
All books securely packaged. Some books ship from Ireland.
| Quantità dell'ordine | Da 14 a 20 giorni lavorativi | Da 13 a 14 giorni lavorativi |
|---|---|---|
| Primo articolo | EUR 8.99 | EUR 17.97 |
I tempi di consegna sono stabiliti dai venditori e variano in base al corriere e al paese. Gli ordini che devono attraversare una dogana possono subire ritardi e spetta agli acquirenti pagare eventuali tariffe o dazi associati. I venditori possono contattarti in merito ad addebiti aggiuntivi dovuti a eventuali maggiorazioni dei costi di spedizione dei tuoi articoli.