Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques

Simani, Silvio; Fantuzzi, Cesare; Patton, Ron J.

ISBN 10: 1852336854 / ISBN 13: 9781852336851

Editore: Springer, 2002

Riguardo questo articolo

Codice articolo ABLIING23Mar2912160256760

Dati bibliografici

• Titolo: Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques
• Editore: Springer
• Data di pubblicazione: 2002
• Lingua: Inglese
• ISBN 10: 1852336854
• ISBN 13: 9781852336851
• Rilegatura: Rilegato
• Condizione: New

Descrizione articolo

Riassunto

Safety in industrial process and production plants is a concern of rising importance but because the control devices which are now exploited to improve the performance of industrial processes include both sophisticated digital system design techniques and complex hardware, there is a higher probability of failure. Control systems must include automatic supervision of closed-loop operation to detect and isolate malfunctions quickly. A promising method for solving this problem is "analytical redundancy", in which residual signals are obtained and an accurate model of the system mimics real process behaviour. If a fault occurs, the residual signal is used to diagnose and isolate the malfunction. This book focuses on model identification oriented to the analytical approach of fault diagnosis and identification covering: choice of model structure; parameter identification; residual generation; and fault diagnosis and isolation. Sample case studies are used to demonstrate the application of these techniques.

Dalla quarta di copertina

Safety in industrial process and production plants is a concern of rising importance, especially if people would be endangered by a catastrophic system failure. On the other hand, because the control devices which are now exploited to improve the overall performance of industrial processes include both sophisticated digital system design techniques and complex hardware (input-output sensors, actuators, components and processing units), there is an increased probability of failure. As a direct consequence of this, control systems must include automatic supervision of closed-loop operation to detect and isolate malfunctions as early as possible.

One of the most promising methods for solving this problem is the "analytical redundancy" approach, in which residual signals are obtained. The basic idea consists of using an accurate model of the system to mimic the real process behaviour. If a fault occurs, the residual signal, i.e., the difference between real system and model behaviours, can be used to diagnose and isolate the malfunction.

This book focuses on model identification oriented to the analytical approach of fault diagnosis and identification. The problem is treated in all its aspects covering:

choice of model structure;

parameter identification;

residual generation;

fault diagnosis and isolation.

Sample case studies are used to demonstrate the application of these techniques.

Model-based Fault Diagnosis in Dynamic Systems Using Identification Techniques will be of interest to researchers in control and fault identification. Industrial control engineers interested in applying the latest methods in fault diagnosis will benefit from the practical examples and case studies.

 

Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.