A Neural Network Approach to Fluid Quantity Measurement in Dynamic Environments
Lingua: inglese
Editore: Springer London, 2012
- Rilegato
- Nuovo
Da: moluna, Greven, Germaniamoluna
Venditore AbeBooks dal 9 luglio 2020
Condizione: Nuovo
EUR 92,27
Quantità: Più di 20 disponibili
Aggiungi al carrelloDescrizione dell’articolo da parte del venditore
Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Investigates the effectiveness of signal enhancement on the neural network based signal classification systemCompares results obtained from the investigation with traditionally used statistical averaging methodsEnables a wide range of fluid.
Codice articolo 4184851
- Titolo
- A Neural Network Approach to Fluid Quantity Measurement in Dynamic Environments
- Autore
- Edin Terzic|Jenny Terzic|Romesh Nagarajah|Muhammad Alamgir
- Editore
- Springer London
- Anno di pubblicazione
- 2012
- Condizione
- New
- Rilegatura
- Gebunden
- Lingua
- inglese
- ISBN 10
- 1447140591
- ISBN 13
- 9781447140597
Sloshing causes liquid to fluctuate, making accurate level readings difficult to obtain in dynamic environments. The measurement system described uses a single-tube capacitive sensor to obtain an instantaneous level reading of the fluid surface, thereby accurately determining the fluid quantity in the presence of slosh. A neural network based classification technique has been applied to predict the actual quantity of the fluid contained in a tank under sloshing conditions.
In A neural network approach to fluid quantity measurement in dynamic environments, effects of temperature variations and contamination on the capacitive sensor are discussed, and the authors propose that these effects can also be eliminated with the proposed neural network based classification system. To examine the performance of the classification system, many field trials were carried out on a running vehicle at various tank volume levels that range from 5 L to 50 L. The effectiveness of signal enhancement on the neural network based signal classification system is also investigated. Results obtained from the investigation are compared with traditionally used statistical averaging methods, and proves that the neural network based measurement system can produce highly accurate fluid quantity measurements in a dynamic environment. Although in this case a capacitive sensor was used to demonstrate measurement system this methodology is valid for all types of electronic sensors.
The approach demonstrated in A neural network approach to fluid quantity measurement in dynamic environments can be applied to a wide range of fluid quantity measurement applications in the automotive, naval and aviation industries to produce accurate fluid level readings. Students, lecturers, and experts will find the description of current research about accurate fluid level measurement in dynamic environments using neural network approach useful.
"Riassunto" può appartenere a un’altra edizione di questo titolo.
Informazioni sull’autore
Dr Edin Terzic is the Chief Manufacturing Engineer – Asia Pacific & Managing Director (CEO) of Powertrain at Delphi Automotive Systems Australia. He holds a Bachelor of Mechanical Engineering (with honors) , Master of Engineering in Computer Integrated Manufacturing and PhD in Automotive Engineering from Swinburne University of Technology. He has published number of technical papers in the area of Engineering Applications of Artificial Intelligence. He also holds several international patents in the area of automotive engineering and had success in commercialising most of his research. Areas of research include: artificial neural networks, intelligent sensors and non-contact inspection.
Dr Jenny Terzic is the Senior Manager and RLE Business Leader at Ford Motor Company - Asia Pacific and Africa. She holds a Bachelor of Mechanical Engineering (with honors), Master of Engineering in Computer Integrated Manufacturing and PhD in Automotive Engineering from Swinburne University of Technology. She has published number of technical papers in the area of Engineering Applications of Artificial Intelligence. Areas of research include: support vector machines, artificial neural networks, advance signal processing, intelligent sensors and non-contact inspection.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Dr Jenny Terzic is the Senior Manager and RLE Business Leader at Ford Motor Company - Asia Pacific and Africa. She holds a Bachelor of Mechanical Engineering (with honors), Master of Engineering in Computer Integrated Manufacturing and PhD in Automotive Engineering from Swinburne University of Technology. She has published number of technical papers in the area of Engineering Applications of Artificial Intelligence. Areas of research include: support vector machines, artificial neural networks, advance signal processing, intelligent sensors and non-contact inspection.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Dr Jenny Terzic is the Senior Manager and RLE Business Leader at Ford Motor Company - Asia Pacific and Africa. She holds a Bachelor of Mechanical Engineering (with honors), Master of Engineering in Computer Integrated Manufacturing and PhD in Automotive Engineering from Swinburne University of Technology. She has published number of technical papers in the area of Engineering Applications of Artificial Intelligence. Areas of research include: support vector machines, artificial neural networks, advance signal processing, intelligent sensors and non-contact inspection.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
Prof. Romesh Nagarajah is the Professor of Mechanical Engineering at Swinburne University of Technology. He leads an internationally recognized research group working in the fields of Non-Contact Inspection and Intelligent Sensing. Professor Nagarajah has several international patents and has published over 150 international journal, conference and technical papers in intelligent sensing and non-contact inspection. He has received several grants from the Australian Research Council and the automotive industry to develop intelligent sensing systems for process monitoring and non-contact inspection.
Muhammad Alamgir is a Software Engineer at Vipac Engineers & Scientists. He has graduated in Computer Systems Engineering from RMIT University. He has been developing microcontroller based sensors & instruments, and has also been involved in smart-sensor based projects, incorporating Artificial Intelligence based techniques, at Delphi Automotive Systems, Australia.
"Descrizione articolo" può appartenere a un’altra edizione di questo titolo.
moluna
Greven, Germania
Venditore AbeBooks dal 9 luglio 2020
Tariffe di spedizione da Germania a U.S.A.
| Articolo | Da 16 a 45 giorni lavorativi | Da 16 a 45 giorni lavorativi |
|---|---|---|
| Primo articolo | EUR 48,99 | EUR 48,99 |
Metodi di pagamento
- Assegno
- Bonifico bancario
- PayPal
Descrizione dello Store
Online Handel nur mit Neubüchern
Informazioni sull’azienda del venditore
Moluna GmbH
Engberdingdamm 27
Greven, Germania 48268
Condizioni di vendita
Editoriale
Riconoscimento legale degli offerenti:
Moluna GmbH
rappresentata dall'amministratore Helge Blischke
Engberdingdamm 27
48268 Greven
Germania
Telefono: 02571/5698933
Fax: 02571/5698930
E-Mail: abe@moluna.de
P. IVA: DE296281834
iscritta nel registro delle imprese del tribunale Steinfurt
numero di registro delle imprese HRB 10553
Siamo membri dell’iniziativa “FairCommerce” dal 24.07.2015.
Per ulteriori informazioni, vedere www.haendlerbund.de/faircommerce.
Diritto di recesso
Se sei un consumatore puoi recedere dal contratto in conformità con quanto segue. Per Consumatore si intende qualsiasi persona fisica che agisce per scopi estranei alla propria attività commerciale, imprenditoriale, artigianale o professionale.
Informazioni sul diritto di recesso
Diritto legale di recesso
Hai il diritto di recedere dal presente contratto entro 14 giorni senza fornire alcuna motivazione.
Il periodo di recesso scade dopo 14 giorni dal giorno in cui tu o una terza parte, diversa dal vettore e da te indicata, acquisisce il possesso fisico dell'ultimo bene o dell'ultimo lotto o pezzo.
Per esercitare il diritto di recesso, compila e invia elettronicamente una dichiarazione esplicita sul nostro sito Web, alla voce “I miei acquisti” nella sezione “Mio account”. Ti comunicheremo senza indugio una conferma di ricezione di tale recesso su un supporto durevole (ad es. via e-mail).
Per rispettare il termine di recesso, è sufficiente inviare la comunicazione relativa all'esercizio del diritto di recesso prima della scadenza del periodo di recesso stesso.
Effetti del recesso
In caso di recesso dal presente contratto, ti rimborseremo tutti i pagamenti ricevuti, compresi i costi di spedizione (ad eccezione dei costi supplementari derivanti dalla tua eventuale scelta di un tipo di spedizione diverso dal tipo meno costoso di consegna standard da noi offerto).
Potremo effettuare una detrazione dal rimborso per la perdita di valore dei beni forniti, qualora tale perdita sia il risultato di una manipolazione non necessaria da parte tua.
Eseguiremo il rimborso senza indebito ritardo e non oltre 14 giorni dal giorno in cui saremo informati della tua decisione di recedere dal presente contratto.
Il rimborso sarà effettuato utilizzando lo stesso mezzo di pagamento da te usato per la transazione iniziale, salvo che tu non abbia espressamente concordato altrimenti; in ogni caso, non dovrai sostenere alcun costo quale conseguenza di tale rimborso.
Possiamo trattenere il rimborso finché non avremo ricevuto i beni oppure finché non avrai fornito la prova di averli rispediti, a seconda di quale condizione si verifichi per prima.
Dovrai rispedire i beni o consegnarli a moluna, Greven, Germany, senza indebito ritardo e, in ogni caso, entro 14 giorni dal giorno in cui ci hai comunicato la tua volontà di recedere dal presente contratto. Il termine è rispettato se rispedisci i beni prima della scadenza del periodo di 14 giorni. I costi diretti della restituzione dei beni saranno a tuo carico. Sei responsabile solo della diminuzione del valore dei beni risultante da una manipolazione diversa da quella necessaria per stabilire la natura, le caratteristiche e il funzionamento dei beni stessi.
Eccezioni al diritto di recesso
Il diritto di recesso non si applica a:
- La fornitura di giornali, periodici o riviste ad eccezione dei contratti di abbonamento; e
- La fornitura di contenuto digitale non fornito su un supporto materiale (ad es. su un CD o DVD), se al momento dell'invio dell'ordine hai accettato l'inizio dell'esecuzione e hai riconosciuto che non avresti potuto recedere una volta iniziata l'esecuzione.