Theory of Elastisity, Stability and Dynamics of Structures Common Problems
Lingua: inglese
Editore: Trafford Publishing, 2012
- Brossura
- Nuovo

Da: AHA-BUCH GmbH, Einbeck, GermaniaAHA-BUCH GmbH
Venditore AbeBooks dal 14 agosto 2006
Condizione: Nuovo
EUR 28,69
Quantità: 1 disponibile
Aggiungi al carrelloDescrizione dell’articolo da parte del venditore
nach der Bestellung gedruckt Neuware - Printed after ordering - The content of the book is based on the lectures on the theory of elasticity, stability, and dynamics of structures. The importance of these disciplines in the preparation of young structural engineers for work in the practice cannot be overemphasized. The university training in such fundamental discipline must seek to build a strong foundation and to illustrate the application of the used methods to practical engineering problems. The solution of a structural engineering problem usually consists of three basic steps: the simplification to such a state of idealization that it can be expressed in allegorical or geometrical form, the solution of this mathematical form, and the interpretation of the results of the solution in terms of the engineering needs. By successive illustration of these three steps in the solution of each problem, the student must be led and encouraged to approach the solution of his own engineering problems in a similar way or in similar manner with a desired degree of accuracy in the final result.…
Codice articolo 9781466968622
- Titolo
- Theory of Elastisity, Stability and Dynamics of Structures Common Problems
- Autore
- Konstantin Kazakov
- Editore
- Trafford Publishing
- Anno di pubblicazione
- 2012
- Condizione
- Neu
- Rilegatura
- Taschenbuch
- Lingua
- inglese
- ISBN 10
- 1466968621
- ISBN 13
- 9781466968622
- Peso dell'articolo
- 220 grammi
- Dimensioni
- 216x140x9 mm
"Riassunto" può appartenere a un’altra edizione di questo titolo.
Estratto. © Ristampato con autorizzazione. Tutti i diritti riservati.
Theory of Elastisity, Stability and Dynamics of Structures Common Problems
By Konstantin KazakovTrafford Publishing
Copyright © 2012 Konstantin KazakovAll right reserved.
ISBN: 978-1-4669-6862-2
Contents
Preface.............................................................................................................................................................................................ixChapter 1. Basic relations in Theory of elasticity..................................................................................................................................................1Chapter 2. Plane problems in Theory of elasticity...................................................................................................................................................17Chapter 3. Method of trigonometric series...........................................................................................................................................................25Chapter 4. Theories for bending of thin and moderate thick elastic plates...........................................................................................................................37Chapter 5. The Method of double trigonometric series in bending of thin elastic plates (Navier method)..............................................................................................49Chapter 6. Introduction to the linear theory of thin elastic shells.................................................................................................................................59Chapter 7. Introduction to the Finite element method (FEM)..........................................................................................................................................71Chapter 8. Stability of elastic structures..........................................................................................................................................................85Chapter 9. Buckling of frame structures. Application of the force method and the displacement method in the buckling of frame structures............................................................93Chapter 10. Buckling of structures, modeled by one-dimensional finite elements. Geometrical stiffness matrix........................................................................................99Chapter 11. Dynamics of structures. Single-degree of freedom system.................................................................................................................................105Chapter 12. Multi-degree of freedom systems.........................................................................................................................................................121Chapter 13. Systems with large number of degrees of freedom.........................................................................................................................................135Chapter 14. Introduction to seismic mechanics. Spectrum Method. The Finite elements method in the seismic response of structures. Direct integration of the equations of motion.....................143References..........................................................................................................................................................................................157
Chapter One
Basic relations in Theory of elasticity1.1 Theory of elasticity subject
The Theory of elasticity is engaged in research of the behavior of elastic bodies. A body is called elastic when it is capable of restoring its initial shape and dimensions, after the forces or reasons causing strains have been eliminated. A variety of materials could be assumed as elastic, up to a certain stress limits. That shows a presence of proportionality between strains and stresses. The relations between these quantities, i.e. strains and stresses, to the mentioned limits of stresses, are known as Hooke's law (Robert Hooke 1636-1703). In practice, the implemented proportionality is an idealization that leads to significant computational relieves.
1.2 Basic concepts and relations
In multitude of problems the atomic, discreet in nature, structure of the material can be ignored. The researched bodies are assumed to be continuous. In this way, the quantities are described by functions, defined as continuous in the body domain. This approach lies at the root of the Theory of elasticity.
Let us recall known from Strength of materials concepts, quantities, and their symbols (notations), in reference to one-dimensional problems.
Strains ε in one-dimensional are: the relation between the geometrical changes of dimension to the value of this dimension. They can be assumed as relative changes, and they are non-dimensional. They are related to stresses σ by material characteristics, called modulus of elasticity:
E = σ/ε. (i)
Another important material characteristic is the Poisson's ratio. It shows the relation between the strains, perpendicular to the direction of stresses and the parallel ones (parallel to the direction of stresses), i.e.:
ν = εy/εx = εz/εx (ii)
Besides the modulus of elasticity, we use modulus of shear strains:
G = τ/γ. (iii)
The relation between the two modulii is:
G = E/2(1 + ν). (iv)
Let us define three basic quantities, which are going to be used in Theory of elasticity, and to show the relations between them.
1.2.1 Displacement
When one body is subjected to certain effect, for instance, system of forces, then its points get displaced. Displacements we call: the changes of the position of body's points, due to some effect (force) applied upon the body. In the general case, the displacement can be expressed as a sum of two displacements—as an ideal rigid body displacement, and relative displacement of the points. Later on we are going to be interested only in relative displacements because they are the ones that caused strains and stresses.
Let us use one example, Figure 1.1. The body shown in the figure is supported in a way that displacements as an ideal rigid body are not possible, the body is restrained. Point A of the body Ω is shifted after loading, and its new position (location) is point [bar.A], Figure 1.1.
The displacement at point can be expressed through its components in three orthogonal axes, for instance the Cartesian coordinate system Oxyz. These components are the projections of the displacement to corresponding axes, Figure 1.2. Then the vector, containing these values, scalars, can be written as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.1)
where u (x, y, z) is displacement in axis x, v(x, y, z) - displacement in axis y, and w (x, y, z) - displacement in axis z.
1.2.2 Strain
When the distance between two points of the body changes, due to the loading, we assume that the body gets deformed. Strains can be expressed if the displacements are known. Because of the body is treated as continuous, strains are continuous functions as well.
In the case of three-dimensional deformation, the vector of strains ε(x, y, z) at point A(x, y, z) of the body contains six components:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.2)
where εx, εy and εz are linear strains in the coordinate axes, respectively x, y z, and γxy, γyz, γzx are shear strains. They can be calculated by the relations:
εx = [partial derivative]u/[partial derivative]x, εy = [partial derivative]v/[partial derivative]y, εz = [partial derivative]w/[partial derivative]z
and
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.3)
The deformations at a point are often shown in tensor form:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.4)
This tensor, and the stress tensor, which we are going to show below, both are symmetrical in regards to the leading diagonal. This means that for Tε we have γyx = γxy, γzx = γxz γzy = γyz.
If we know the strains in three perpendicular directions, we are able to calculate the strain in arbitrary direction.
The strains in a body, or at a particular point of it, satisfy certain conditions, called equations of continuity of the strains or compatibility conditions. Thus, the equations of continuity of the strains appear as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.5)
We are going to show a proof of the first condition. Let us differentiate the forth equation in (1.3), i.e.:
γxy = [partial derivative]u/[partial derivative]y + [partial derivative]v/[partial derivative]x (1.6)
once in x and once in y. The result is:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.7)
Taking the consideration that
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.8)
we get:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.9)
1.2.3 Stress
A certain field of strains corresponds to a certain field of stresses. At point A(x, y, z) it has six components. Recorded as a vector, it appears as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.10)
where σx, σy, σz are normal stresses, with directions in coordinate axes, respectively x, y and z, τxy, τyz, τzx are shear stresses. Under the notation τxy we are going to consider the shear stresses in a plane with a normal, parallel to axis x, acting in direction of axis y. The stresses are shown in Figure 1.3.
The stresses at a point can be given in a tensor form as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.11)
Here τyx = τxy, τzx = τxz and τzy = τyz. Each column of the tensor (1.11) corresponds to a plane with a normal, parallel to one of the coordinate axes x, y or z, i.e. gives the stresses, acting upon it. Each row, itself, shows the stresses in one of the directions.
1.2.4 Stress at a point in arbitrary (random) direction.
If the stresses in three perpendicular planes at point A(x, y, z) are known, we can calculate the stress in a plane with arbitrary direction. Let us consider the tetrahedron, Figure 1.4. Its apex coincides with point A(x, y, z) and has altitude h. The normal to the base is parallel to the direction of which we are interested the stress. Let us express it with n, and the stress with [bar.p]n. The base area is denoted as F, and the directional cosines respectively as cos(n, x), cos(n, y) and cos(n, z).
The equation of equilibrium in x direction is:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (1.15)
where Px are volume forces in x. If h -> 0, the forth term vanishes. Then, after dividing by F, we obtain:
pnx = σx cos(n,x)+τyx cos(n,y)+τzxcos(n,z). (1.16)
If h -> 0, stresses towards the seat A(x, y, z), i.e. [bar.σ]x -> σx, [bar.τ]yx -> τyx and [bar.τ]zx -> τzx.
Using the equations for equilibrium in y and z axes we obtain:
pnx = τxy cos(n,x)+σy cos(n,y)+τzycos(n,z). (1.17)
and
pnz = τxz cos(n,x)+τyz cos(n,y)+σzcos(n,z).. (1.18)
The stress pn, acting at point A(x, y, z), we calculate from:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.19)
1.2.5 Equations of equilibrium
Let us consider the elementary parallelepiped with sides dx, dy and dz, Figure 1.5. All of the stresses and volume forces, acting upon it are shown. In the figure, the stresses with differential increase are written below the wavy line, for instance [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].
Let us take only stresses, acting in coordinate direction x. Constituting the equation of equilibrium, we obtain:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.20)
Relation (1.20) we divide by dxdydz. The result is:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.21)
By analogy, the equilibrium in other two coordinate directions leads to:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.22)
and
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.23)
We will give a proof of the reciprocity of the shear stresses, for instance τxz and τzx, assuming that they refer to the centre of differential volume.
If we sum now the moments, related to axis y, we will get that:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (1.24)
or finally: τzx xzdxdydz = τdxdydz, i.e. τzx = τxz. Summation of moments towards axes x and z leads to τyz = τzy and τxy = τyx, respectively.
1.2.6 Principal stresses
Through point A(x, y, z) it is possible to draw three perpendicular planes, the stresses upon which correspond to the condition:
σ3 - I1σ2 - I2σ - I3 = 0, (1.25)
where:
I1 = σx + σy + σz, (1.26)
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.27)
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.28)
These planes are called principal planes, and the stresses principal stresses. We are going to denote these stresses as σ1, σ2 and σ3. Typical for these planes is that, shear stresses are missing (zeros) upon them. and
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.30)
where E is a modulus of elasticity, and ν - Poisson's ratio.
It is completely obvious, from expressions (1.29) and (1.30) that, the relation between strains and stresses is linear, and depends on material constants. We could show it in a matrix form as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.31)
1.3 Basic assumptions in Theory of elasticity
The basic assumptions, used in Theory of elasticity are:
• Assumption for continuity of structures. We have already mentioned that, this precondition allows the use of functions, defined as continuous in the field (the domain) of the researched body. These functions describe the displacements, strains and stresses.
• The bodies are perfectly elastic. It means that, after removal of forces, they completely restore their dimensions and initial shape, i.e. the shape before the stress effect. This property is connected with proportionality of strains and stresses, i.e. the relation between these quantities is linear. The modulus of elasticity E is a constant, and in this case we are talking about material linearity.
• The effects upon bodies cause small displacements. It means that, the strains and the stresses can be described in the initial, non-deformed configuration of the bodies. When this assumption is not valid the mathematical model gets quite complicated. Then we are talking about large displacements, or about geometrical non-linearity.
• Saint-Venant's principle is valid.
We are going to use the following additional assumptions:
• The bodies are isotropic and homogeneous. This can be expressed as: E = Ex = Ey = Ez.
• The initial strains or stresses are zeros, i.e. ε0 = 0 and σ0 = 0.
Chapter Two
Plane problems in Theory of elasticity2.1. Theoretical summary of plane problems in Theory of elasticity
2.1.1 Equilibrium of plane rectangular differential element
The differential equilibrium equations, describing the plane problems in Theory of elasticity are derived from a plane rectangular differential element with sides dx and dy, Figure 2.1. This element is cut from a plane disk 1 m in thickness. The components of volume forces and the components of the stresses act along each side. For convenience the sides are assumed to be parallel to the coordinate axes. Obviously, the generalized forces act also in directions parallel to the coordinate axes.
If we consecutively constitute the following three equilibrium conditions ΣX = 0, ΣY = 0 and ΣMP = 0, where P coincides with the intersection point of the diagonals of the rectangular, we get:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (2.1)
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (2.2)
and
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (2.3)
We would like to remind that in the Mechanics, the above mentioned conditions are called First group conditions of plane body equilibrium.
(Continues...)
Excerpted from Theory of Elastisity, Stability and Dynamics of Structures Common Problemsby Konstantin Kazakov Copyright © 2012 by Konstantin Kazakov. Excerpted by permission of Trafford Publishing. All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.
"Descrizione articolo" può appartenere a un’altra edizione di questo titolo.
AHA-BUCH GmbH
Einbeck, Germania
Venditore AbeBooks dal 14 agosto 2006
Tariffe di spedizione da Germania a U.S.A.
| Articolo | Da 7 a 10 giorni lavorativi | Da 5 a 7 giorni lavorativi |
|---|---|---|
| Primo articolo | EUR 35,00 | EUR 45,00 |
Metodi di pagamento
- Assegno
- Bonifico bancario
- PayPal
Descrizione dello Store
Das Unternehmen AHA-BUCH GmbH: Seit der Gründung von AHA-BUCH im Juli 2005 ist unser Hauptziel, zufriedenen Kunden so schnell und so preisgünstig wie möglich ihren Bücherwunsch zu erfüllen. Unsere Firma beschäftigt 16 Mitarbeiter, die nur ein Ziel kennen: den Kunden und seine Wünsche! Auf über 3700 m2 Fläche haben wir über 100.000 Bücher, Modernes Antiquariat und Spiele auf Lager.
Specializzazione
Kinderbücher & Kinderhör Casetten, German Books, Software, Natur & Tiere, Ratgeber, Sachbücher, Englische Bücher, Medizin & Gesundheit, Universität & StudiumInformazioni sull’azienda del venditore
AHA-BUCH GmbH
Garlebsen 48
Einbeck, Germania 37574
Imprimere
Informazioni sul venditore:
AHA-BUCH GmbH
rappresentata dall'amministratore delegato Christel Glass
Garlebsen 48
37574 Einbeck
Germania
Telefono: 055639996039
Fax: 055639995974
E-Mail: abebooks@aha-buch.de
USt-IdNr.: DE261904229
registrato presso Registro delle imprese Amtsgerichtes Göttingen
Handelsregisternummer HRB 200691
Risoluzione alternativa delle controversie:
La Commissione europea fornisce una piattaforma per la risoluzione extragiudiziale delle controversie online (piattaforma ODR), accessibile nell'ambito di https://ec.europa.eu/odr.
Siamo membri dell'iniziativa "FairCommerce" dal 25.05.2018.
Per ulteriori informazioni, vedere www.fair-commerce.de.
Condizioni di vendita
Termini e condizioni generali e informazioni sul cliente / Informativa sulla privacy
I. Condizioni generali di contratto
§ 1 Disposizioni di base
(1) I seguenti termini e condizioni si applicano a tutti i contratti che l'utente conclude con noi in qualità di fornitore (AHA-BUCH GmbH) tramite le piattaforme Internet AbeBooks e/o ZVAB. Se non diversamente concordato, l'inclusione di uno qualsiasi dei tuoi termini e condizioni da te utilizzati sarà contestata.
(2) Un consumatore ai sensi delle seguenti norme è qualsiasi persona fisica che conclude un negozio giuridico per scopi che non possono essere prevalentemente attribuiti né alla sua attività commerciale né alla sua attività professionale indipendente. Un imprenditore è qualsiasi persona fisica o giuridica o una società di persone con capacità giuridica che, al momento della conclusione di un negozio giuridico, agisce nell'esercizio della sua attività professionale o commerciale indipendente.
§ 2 Conclusione del contratto
(1) L'oggetto del contratto è la vendita di beni.
(2) Se un articolo è elencato da noi su AbeBooks o ZVAB, l'attivazione della pagina di offerta su AbeBooks o ZVAB costituisce l'offerta vincolante per concludere un contratto alle condizioni contenute nella pagina dell'articolo.
(3) Il contratto è concluso tramite il sistema di carrello online come segue:
La merce destinata all'acquisto viene stoccata nel "carrello". Tramite il pulsante corrispondente nella barra di navigazione è possibile richiamare il "carrello" e apportare modifiche in qualsiasi momento.
Dopo aver richiamato la pagina "Checkout" e inserito i dati personali e le condizioni di pagamento e spedizione, tutti i dati dell'ordine verranno nuovamente visualizzati nella pagina di panoramica dell'ordine.
Prima di inviare l'ordine, hai la possibilità di controllare nuovamente tutte le informazioni, modificarle (anche tramite la funzione "indietro" del browser Internet) o annullare l'acquisto.
Inviando l'ordine tramite il pulsante "Acquista ora", dichiari l'accettazione dell'offerta in modo legalmente vincolante, con la quale il contratto è concluso.
(4) L'elaborazione dell'ordine e la trasmissione di tutte le informazioni necessarie in relazione alla conclusione del contratto sono parzialmente automatizzate via e-mail. È quindi necessario assicurarsi che l'indirizzo e-mail che hai memorizzato con noi sia corretto, che la ricezione delle e-mail sia tecnicamente garantita e, in particolare, che i filtri antispam non lo impediscano.
§ 3 Diritto di ritenzione, riserva di proprietà
(1) È possibile esercitare un diritto di ritenzione solo se si tratta di reclami derivanti dallo stesso rapporto contrattuale.
(2) La merce rimane di nostra proprietà fino al completo pagamento del prezzo di acquisto.
§ 4 Garanzia
(1)I diritti di garanzia legali esistono.
(2)Nel caso di beni usati, il periodo di garanzia è di un anno dalla consegna dell'articolo, in deroga alla normativa di legge. La riduzione del termine non si applica:
- danni causati colpevolmente a noi imputabili da lesioni alla vita, all'incolumità fisica o alla salute e in caso di altri danni causati intenzionalmente o per negligenza grave;
- nella misura in cui abbiamo nascosto fraudolentemente il difetto o abbiamo assunto una garanzia per la qualità dell'articolo.
(3) In qualità di consumatore, sei pregato di controllare l'articolo immediatamente dopo la consegna per verificarne la completezza, i difetti evidenti e i danni di trasporto e di informare noi e lo spedizioniere di eventuali reclami il prima possibile. Se non si rispetta questo, ciò non avrà alcun effetto sulle richieste di garanzia legale.
§ 5 Scelta della legge, luogo di adempimento, foro competente
(1)Si applica il diritto tedesco. Nel caso dei consumatori, questa scelta di legge si applica solo nella misura in cui ciò non revochi la protezione offerta dalle disposizioni imperative della legge dello Stato di residenza abituale del consumatore (principio di favorevolezza).
(2)Il luogo di adempimento per tutti i servizi derivanti dai rapporti commerciali esistenti con noi e il foro competente è la nostra sede legale, nella misura in cui non sei un consumatore, ma un commerciante, una persona giuridica di diritto pubblico o un fondo speciale di diritto pubblico. Lo stesso vale se non si dispone di un foro competente generale in Germania o nell'UE o se il domicilio o la residenza abituale non sono noti al momento della proposizione dell'azione. Il diritto di ricorrere al tribunale di un altro foro competente rimane inalterato.
(3)Le disposizioni della Convenzione delle Nazioni Unite sui contratti di vendita internazionale di merci non si applicano espressamente.
II. Informazioni sul cliente
- Identità del Venditore
AHA-BUCH GmbH
Garlebsen 48 •
D-37574 Einbeck
Germania
Telefono: 055639996039
E-mail: abebooks@aha-buch.de
Risoluzione alternativa delle controversie:
La Commissione europea fornisce una piattaforma per la risoluzione extragiudiziale delle controversie online (piattaforma ODR), accessibile nell'ambito di https://ec.europa.eu/odr.
-
Informazioni sulla conclusione del contratto
Le fasi tecniche per la conclusione del contratto, la conclusione del contratto stesso e le opzioni di correzione sono eseguite in conformità con le disposizioni "Conclusione del contratto" delle nostre Condizioni Generali (Parte I.). -
Lingua del contratto, archiviazione del testo del contratto
3.1. La lingua del contratto è il tedesco.
3.2. Il testo completo del contratto non sarà memorizzato da noi. Prima di inviare l'ordine, i dati del contratto possono essere stampati o salvati elettronicamente tramite la funzione di stampa del browser. Dopo aver ricevuto l'ordine da parte nostra, i dati dell'ordine, le informazioni legalmente prescritte per i contratti a distanza e le Condizioni generali ti verranno nuovamente inviati via e-mail.
-
Caratteristiche essenziali dei beni o servizi
Le caratteristiche essenziali dei beni e/o servizi possono essere trovate nella rispettiva offerta. -
Prezzi e condizioni di pagamento
5.1. I prezzi indicati nelle rispettive offerte e le spese di spedizione rappresentano i prezzi totali. Includono tutte le componenti del prezzo, comprese tutte le tasse applicabili.
5.2. Le spese di spedizione sostenute non sono incluse nel prezzo di acquisto. Possono essere richiamati tramite un pulsante designato sul nostro sito Web o nella rispettiva offerta, sono mostrati separatamente nel corso del processo di ordinazione e devono essere a carico dell'utente in aggiunta, a meno che non sia stata promessa la spedizione gratuita.
5.3. Se la consegna viene effettuata in paesi al di fuori dell'Unione Europea, potremmo incorrere in costi aggiuntivi per i quali non siamo responsabili, come dazi doganali, tasse o commissioni di trasferimento di denaro (commissioni di trasferimento o di cambio degli istituti di credito), che sono a tuo carico. Eventuali costi sostenuti per il trasferimento di denaro saranno sostenuti anche da te nei casi in cui la consegna viene effettuata in uno stato membro dell'UE, ma il pagamento è stato avviato al di fuori dell'Unione Europea.
5.4. I metodi di pagamento a tua disposizione sono indicati sotto un pulsante corrispondente sul nostro sito web o nella rispettiva offerta.
5.5. Salvo diversa indicazione per i singoli metodi di pagamento, i diritti di pagamento derivanti dal contratto concluso sono immediatamente dovuti per il pagamento.
- Termini di consegna
6.1. I termini di consegna, la data di consegna e, se applicabile, le restrizioni di consegna esistenti sono disponibili sotto un pulsante designato sul nostro sito Web o nella rispettiva offerta. Nella misura in cui nessun altro termine è specificato nella rispettiva offerta o sotto il pulsante corrispondente designato, la consegna della merce avverrà entro 3-5 giorni dalla conclusione del contratto (in caso di pagamento anticipato concordato, tuttavia, solo dopo il tempo dell'istruzione di pagamento).
6.2. Nella misura in cui sei un consumatore, è regolato dalla legge che il rischio di perdita accidentale e deterioramento accidentale dell'articolo venduto durante la spedizione passerà a te solo al momento della consegna della merce, indipendentemente dal fatto che la spedizione sia assicurata o non assicurata. Ciò non si applica se hai commissionato in modo indipendente una società di trasporti non nominata dall'imprenditore o da una persona altrimenti designata per effettuare la spedizione.
- Responsabilità legale per difetti
La responsabilità per i difetti è regolata dalla disposizione "Garanzia" nei nostri Termini e condizioni generali (Parte I).
ultimo aggiornamento: 07/12/2017
Diritto di recesso
Se sei un consumatore puoi recedere dal contratto in conformità con quanto segue. Per Consumatore si intende qualsiasi persona fisica che agisce per scopi estranei alla propria attività commerciale, imprenditoriale, artigianale o professionale.
Informazioni sul diritto di recesso
Diritto legale di recesso
Hai il diritto di recedere dal presente contratto entro 14 giorni senza fornire alcuna motivazione.
Il periodo di recesso scade dopo 14 giorni dal giorno in cui tu o una terza parte, diversa dal vettore e da te indicata, acquisisce il possesso fisico dell'ultimo bene o dell'ultimo lotto o pezzo.
Per esercitare il diritto di recesso, compila e invia elettronicamente una dichiarazione esplicita sul nostro sito Web, alla voce “I miei acquisti” nella sezione “Mio account”. Ti comunicheremo senza indugio una conferma di ricezione di tale recesso su un supporto durevole (ad es. via e-mail).
Per rispettare il termine di recesso, è sufficiente inviare la comunicazione relativa all'esercizio del diritto di recesso prima della scadenza del periodo di recesso stesso.
Effetti del recesso
In caso di recesso dal presente contratto, ti rimborseremo tutti i pagamenti ricevuti, compresi i costi di spedizione (ad eccezione dei costi supplementari derivanti dalla tua eventuale scelta di un tipo di spedizione diverso dal tipo meno costoso di consegna standard da noi offerto).
Potremo effettuare una detrazione dal rimborso per la perdita di valore dei beni forniti, qualora tale perdita sia il risultato di una manipolazione non necessaria da parte tua.
Eseguiremo il rimborso senza indebito ritardo e non oltre 14 giorni dal giorno in cui saremo informati della tua decisione di recedere dal presente contratto.
Il rimborso sarà effettuato utilizzando lo stesso mezzo di pagamento da te usato per la transazione iniziale, salvo che tu non abbia espressamente concordato altrimenti; in ogni caso, non dovrai sostenere alcun costo quale conseguenza di tale rimborso.
Possiamo trattenere il rimborso finché non avremo ricevuto i beni oppure finché non avrai fornito la prova di averli rispediti, a seconda di quale condizione si verifichi per prima.
Dovrai rispedire i beni o consegnarli a AHA-BUCH GmbH, Einbeck, Germany, senza indebito ritardo e, in ogni caso, entro 14 giorni dal giorno in cui ci hai comunicato la tua volontà di recedere dal presente contratto. Il termine è rispettato se rispedisci i beni prima della scadenza del periodo di 14 giorni. I costi diretti della restituzione dei beni saranno a tuo carico. Sei responsabile solo della diminuzione del valore dei beni risultante da una manipolazione diversa da quella necessaria per stabilire la natura, le caratteristiche e il funzionamento dei beni stessi.
Eccezioni al diritto di recesso
Il diritto di recesso non si applica a:
- La fornitura di giornali, periodici o riviste ad eccezione dei contratti di abbonamento; e
- La fornitura di contenuto digitale non fornito su un supporto materiale (ad es. su un CD o DVD), se al momento dell'invio dell'ordine hai accettato l'inizio dell'esecuzione e hai riconosciuto che non avresti potuto recedere una volta iniziata l'esecuzione.
Condizioni di spedizione
Spediamo il tuo ordine dopo averlo ricevuto
per articoli a portata di mano entro 24 ore,
per articoli con fornitura notturna entro 48 ore.
Nel caso in cui abbiamo bisogno di ordinare un articolo dal nostro fornitore, il nostro tempo di spedizione dipende dalla data di ricezione degli articoli, ma gli articoli verranno spediti lo stesso giorno.
Il nostro obiettivo è quello di inviare gli articoli ordinati nel modo più veloce, ma anche più efficiente e sicuro ai nostri clienti.
Privacy e sicurezza
Informativa sulla privacy
Salvo diversa indicazione di seguito, la fornitura dei tuoi dati personali non è richiesta dalla legge o dal contratto, né è necessaria per la conclusione di un contratto. Non sei obbligato a fornire i dati. Il mancato conferimento non avrà alcuna conseguenza. Ciò vale solo se non vengono fornite altre informazioni nelle successive operazioni di trattamento.
Per "dati personali" si intende qualsiasi informazione relativa a una persona fisica identificata o identificabile.
Raccolta, elaborazione e utilizzo dei dati personali per gli ordini
Al momento dell'ordine, raccogliamo e utilizziamo i tuoi dati personali solo nella misura necessaria per soddisfare ed elaborare il tuo ordine e per elaborare le tue richieste. Il conferimento dei dati è necessario per la conclusione del contratto. Il trattamento viene effettuato sulla base dell'articolo 6 (1) lit. b GDPR ed è necessario per l'esecuzione di un contratto con voi. I tuoi dati non saranno trasmessi a terzi senza il tuo esplicito consenso. Sono esclusi da ciò solo i nostri partner di servizio, di cui abbiamo bisogno per elaborare il rapporto contrattuale o i fornitori di servizi che utilizziamo nel contesto dell'elaborazione degli ordini. Oltre ai destinatari nominati nelle rispettive clausole della presente dichiarazione sulla protezione dei dati, questi sono, ad esempio, destinatari delle seguenti categorie: fornitori di servizi di spedizione, fornitori di servizi di pagamento, fornitori di servizi di gestione delle merci, fornitori di servizi per l'elaborazione degli ordini, host web, fornitori di servizi IT e commercianti dropshipping. In tutti i casi, osserviamo rigorosamente i requisiti legali. L'ambito della trasmissione dei dati è limitato al minimo.
Durata della conservazione
Dopo il completamento del contratto, i dati saranno prima conservati per la durata del periodo di garanzia, quindi tenendo conto dei periodi di conservazione legali, in particolare fiscali e commerciali e quindi cancellati dopo la scadenza del periodo, a meno che tu non abbia acconsentito a ulteriori elaborazioni e utilizzo.
Diritti dell'interessato
Se i requisiti legali sono soddisfatti, hai i seguenti diritti ai sensi degli articoli da 15 a 20 GDPR: diritto all'informazione, alla correzione, alla cancellazione, alla limitazione del trattamento, alla portabilità dei dati. Inoltre, ai sensi dell'articolo 21 (1) GDPR, hai il diritto di opporti al trattamento basato sull'articolo 6 (1) f GDPR e al trattamento per scopi di marketing diretto.
Contattaci su richiesta. I dettagli di contatto possono essere trovati nella nostra impronta.
Diritto di proporre reclamo all'autorità di controllo
Ai sensi dell'articolo 77 del GDPR, hai il diritto di presentare un reclamo all'autorità di controllo se ritieni che il trattamento dei tuoi dati personali non sia lecito.
ultimo aggiornamento: 25/04/2018