Theory of Elastisity, Stability and Dynamics of Structures Common Problems
Lingua: inglese
Editore: Trafford Publishing, 2012
- Brossura
- Nuovo



Condizione: Nuovo
EUR 21,70
Quantità: 5 disponibili
Aggiungi al carrelloDescrizione dell’articolo da parte del venditore
Theory of Elastisity, Stability and Dynamics of Structures Common Problems | Konstantin Kazakov | Taschenbuch | Kartoniert / Broschiert | Englisch | 2012 | Trafford Publishing | EAN 9781466968622 | Verantwortliche Person für die EU: Libri GmbH, Europaallee 1, 36244 Bad Hersfeld, gpsr[at]libri[dot]de | Anbieter: preigu Print on Demand.
Codice articolo 109006576
- Titolo
- Theory of Elastisity, Stability and Dynamics of Structures Common Problems
- Autore
- Konstantin Kazakov
- Editore
- Trafford Publishing
- Anno di pubblicazione
- 2012
- Condizione
- Neu
- Rilegatura
- Taschenbuch
- Lingua
- inglese
- ISBN 10
- 1466968621
- ISBN 13
- 9781466968622
- Peso dell'articolo
- 220 grammi
- Dimensioni
- 216 x 140 x 9 mm
- Cataloghi dei venditori
- Bücher
"Riassunto" può appartenere a un’altra edizione di questo titolo.
Estratto. © Ristampato con autorizzazione. Tutti i diritti riservati.
Theory of Elastisity, Stability and Dynamics of Structures Common Problems
By Konstantin KazakovTrafford Publishing
Copyright © 2012 Konstantin KazakovAll right reserved.
ISBN: 978-1-4669-6862-2
Contents
Preface.............................................................................................................................................................................................ixChapter 1. Basic relations in Theory of elasticity..................................................................................................................................................1Chapter 2. Plane problems in Theory of elasticity...................................................................................................................................................17Chapter 3. Method of trigonometric series...........................................................................................................................................................25Chapter 4. Theories for bending of thin and moderate thick elastic plates...........................................................................................................................37Chapter 5. The Method of double trigonometric series in bending of thin elastic plates (Navier method)..............................................................................................49Chapter 6. Introduction to the linear theory of thin elastic shells.................................................................................................................................59Chapter 7. Introduction to the Finite element method (FEM)..........................................................................................................................................71Chapter 8. Stability of elastic structures..........................................................................................................................................................85Chapter 9. Buckling of frame structures. Application of the force method and the displacement method in the buckling of frame structures............................................................93Chapter 10. Buckling of structures, modeled by one-dimensional finite elements. Geometrical stiffness matrix........................................................................................99Chapter 11. Dynamics of structures. Single-degree of freedom system.................................................................................................................................105Chapter 12. Multi-degree of freedom systems.........................................................................................................................................................121Chapter 13. Systems with large number of degrees of freedom.........................................................................................................................................135Chapter 14. Introduction to seismic mechanics. Spectrum Method. The Finite elements method in the seismic response of structures. Direct integration of the equations of motion.....................143References..........................................................................................................................................................................................157
Chapter One
Basic relations in Theory of elasticity1.1 Theory of elasticity subject
The Theory of elasticity is engaged in research of the behavior of elastic bodies. A body is called elastic when it is capable of restoring its initial shape and dimensions, after the forces or reasons causing strains have been eliminated. A variety of materials could be assumed as elastic, up to a certain stress limits. That shows a presence of proportionality between strains and stresses. The relations between these quantities, i.e. strains and stresses, to the mentioned limits of stresses, are known as Hooke's law (Robert Hooke 1636-1703). In practice, the implemented proportionality is an idealization that leads to significant computational relieves.
1.2 Basic concepts and relations
In multitude of problems the atomic, discreet in nature, structure of the material can be ignored. The researched bodies are assumed to be continuous. In this way, the quantities are described by functions, defined as continuous in the body domain. This approach lies at the root of the Theory of elasticity.
Let us recall known from Strength of materials concepts, quantities, and their symbols (notations), in reference to one-dimensional problems.
Strains ε in one-dimensional are: the relation between the geometrical changes of dimension to the value of this dimension. They can be assumed as relative changes, and they are non-dimensional. They are related to stresses σ by material characteristics, called modulus of elasticity:
E = σ/ε. (i)
Another important material characteristic is the Poisson's ratio. It shows the relation between the strains, perpendicular to the direction of stresses and the parallel ones (parallel to the direction of stresses), i.e.:
ν = εy/εx = εz/εx (ii)
Besides the modulus of elasticity, we use modulus of shear strains:
G = τ/γ. (iii)
The relation between the two modulii is:
G = E/2(1 + ν). (iv)
Let us define three basic quantities, which are going to be used in Theory of elasticity, and to show the relations between them.
1.2.1 Displacement
When one body is subjected to certain effect, for instance, system of forces, then its points get displaced. Displacements we call: the changes of the position of body's points, due to some effect (force) applied upon the body. In the general case, the displacement can be expressed as a sum of two displacements—as an ideal rigid body displacement, and relative displacement of the points. Later on we are going to be interested only in relative displacements because they are the ones that caused strains and stresses.
Let us use one example, Figure 1.1. The body shown in the figure is supported in a way that displacements as an ideal rigid body are not possible, the body is restrained. Point A of the body Ω is shifted after loading, and its new position (location) is point [bar.A], Figure 1.1.
The displacement at point can be expressed through its components in three orthogonal axes, for instance the Cartesian coordinate system Oxyz. These components are the projections of the displacement to corresponding axes, Figure 1.2. Then the vector, containing these values, scalars, can be written as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.1)
where u (x, y, z) is displacement in axis x, v(x, y, z) - displacement in axis y, and w (x, y, z) - displacement in axis z.
1.2.2 Strain
When the distance between two points of the body changes, due to the loading, we assume that the body gets deformed. Strains can be expressed if the displacements are known. Because of the body is treated as continuous, strains are continuous functions as well.
In the case of three-dimensional deformation, the vector of strains ε(x, y, z) at point A(x, y, z) of the body contains six components:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.2)
where εx, εy and εz are linear strains in the coordinate axes, respectively x, y z, and γxy, γyz, γzx are shear strains. They can be calculated by the relations:
εx = [partial derivative]u/[partial derivative]x, εy = [partial derivative]v/[partial derivative]y, εz = [partial derivative]w/[partial derivative]z
and
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.3)
The deformations at a point are often shown in tensor form:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.4)
This tensor, and the stress tensor, which we are going to show below, both are symmetrical in regards to the leading diagonal. This means that for Tε we have γyx = γxy, γzx = γxz γzy = γyz.
If we know the strains in three perpendicular directions, we are able to calculate the strain in arbitrary direction.
The strains in a body, or at a particular point of it, satisfy certain conditions, called equations of continuity of the strains or compatibility conditions. Thus, the equations of continuity of the strains appear as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.5)
We are going to show a proof of the first condition. Let us differentiate the forth equation in (1.3), i.e.:
γxy = [partial derivative]u/[partial derivative]y + [partial derivative]v/[partial derivative]x (1.6)
once in x and once in y. The result is:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.7)
Taking the consideration that
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.8)
we get:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.9)
1.2.3 Stress
A certain field of strains corresponds to a certain field of stresses. At point A(x, y, z) it has six components. Recorded as a vector, it appears as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.10)
where σx, σy, σz are normal stresses, with directions in coordinate axes, respectively x, y and z, τxy, τyz, τzx are shear stresses. Under the notation τxy we are going to consider the shear stresses in a plane with a normal, parallel to axis x, acting in direction of axis y. The stresses are shown in Figure 1.3.
The stresses at a point can be given in a tensor form as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.11)
Here τyx = τxy, τzx = τxz and τzy = τyz. Each column of the tensor (1.11) corresponds to a plane with a normal, parallel to one of the coordinate axes x, y or z, i.e. gives the stresses, acting upon it. Each row, itself, shows the stresses in one of the directions.
1.2.4 Stress at a point in arbitrary (random) direction.
If the stresses in three perpendicular planes at point A(x, y, z) are known, we can calculate the stress in a plane with arbitrary direction. Let us consider the tetrahedron, Figure 1.4. Its apex coincides with point A(x, y, z) and has altitude h. The normal to the base is parallel to the direction of which we are interested the stress. Let us express it with n, and the stress with [bar.p]n. The base area is denoted as F, and the directional cosines respectively as cos(n, x), cos(n, y) and cos(n, z).
The equation of equilibrium in x direction is:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (1.15)
where Px are volume forces in x. If h -> 0, the forth term vanishes. Then, after dividing by F, we obtain:
pnx = σx cos(n,x)+τyx cos(n,y)+τzxcos(n,z). (1.16)
If h -> 0, stresses towards the seat A(x, y, z), i.e. [bar.σ]x -> σx, [bar.τ]yx -> τyx and [bar.τ]zx -> τzx.
Using the equations for equilibrium in y and z axes we obtain:
pnx = τxy cos(n,x)+σy cos(n,y)+τzycos(n,z). (1.17)
and
pnz = τxz cos(n,x)+τyz cos(n,y)+σzcos(n,z).. (1.18)
The stress pn, acting at point A(x, y, z), we calculate from:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.19)
1.2.5 Equations of equilibrium
Let us consider the elementary parallelepiped with sides dx, dy and dz, Figure 1.5. All of the stresses and volume forces, acting upon it are shown. In the figure, the stresses with differential increase are written below the wavy line, for instance [MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII].
Let us take only stresses, acting in coordinate direction x. Constituting the equation of equilibrium, we obtain:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.20)
Relation (1.20) we divide by dxdydz. The result is:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.21)
By analogy, the equilibrium in other two coordinate directions leads to:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.22)
and
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.23)
We will give a proof of the reciprocity of the shear stresses, for instance τxz and τzx, assuming that they refer to the centre of differential volume.
If we sum now the moments, related to axis y, we will get that:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII] (1.24)
or finally: τzx xzdxdydz = τdxdydz, i.e. τzx = τxz. Summation of moments towards axes x and z leads to τyz = τzy and τxy = τyx, respectively.
1.2.6 Principal stresses
Through point A(x, y, z) it is possible to draw three perpendicular planes, the stresses upon which correspond to the condition:
σ3 - I1σ2 - I2σ - I3 = 0, (1.25)
where:
I1 = σx + σy + σz, (1.26)
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.27)
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.28)
These planes are called principal planes, and the stresses principal stresses. We are going to denote these stresses as σ1, σ2 and σ3. Typical for these planes is that, shear stresses are missing (zeros) upon them. and
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (1.30)
where E is a modulus of elasticity, and ν - Poisson's ratio.
It is completely obvious, from expressions (1.29) and (1.30) that, the relation between strains and stresses is linear, and depends on material constants. We could show it in a matrix form as:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (1.31)
1.3 Basic assumptions in Theory of elasticity
The basic assumptions, used in Theory of elasticity are:
• Assumption for continuity of structures. We have already mentioned that, this precondition allows the use of functions, defined as continuous in the field (the domain) of the researched body. These functions describe the displacements, strains and stresses.
• The bodies are perfectly elastic. It means that, after removal of forces, they completely restore their dimensions and initial shape, i.e. the shape before the stress effect. This property is connected with proportionality of strains and stresses, i.e. the relation between these quantities is linear. The modulus of elasticity E is a constant, and in this case we are talking about material linearity.
• The effects upon bodies cause small displacements. It means that, the strains and the stresses can be described in the initial, non-deformed configuration of the bodies. When this assumption is not valid the mathematical model gets quite complicated. Then we are talking about large displacements, or about geometrical non-linearity.
• Saint-Venant's principle is valid.
We are going to use the following additional assumptions:
• The bodies are isotropic and homogeneous. This can be expressed as: E = Ex = Ey = Ez.
• The initial strains or stresses are zeros, i.e. ε0 = 0 and σ0 = 0.
Chapter Two
Plane problems in Theory of elasticity2.1. Theoretical summary of plane problems in Theory of elasticity
2.1.1 Equilibrium of plane rectangular differential element
The differential equilibrium equations, describing the plane problems in Theory of elasticity are derived from a plane rectangular differential element with sides dx and dy, Figure 2.1. This element is cut from a plane disk 1 m in thickness. The components of volume forces and the components of the stresses act along each side. For convenience the sides are assumed to be parallel to the coordinate axes. Obviously, the generalized forces act also in directions parallel to the coordinate axes.
If we consecutively constitute the following three equilibrium conditions ΣX = 0, ΣY = 0 and ΣMP = 0, where P coincides with the intersection point of the diagonals of the rectangular, we get:
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (2.1)
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII], (2.2)
and
[MATHEMATICAL EXPRESSION NOT REPRODUCIBLE IN ASCII]. (2.3)
We would like to remind that in the Mechanics, the above mentioned conditions are called First group conditions of plane body equilibrium.
(Continues...)
Excerpted from Theory of Elastisity, Stability and Dynamics of Structures Common Problemsby Konstantin Kazakov Copyright © 2012 by Konstantin Kazakov. Excerpted by permission of Trafford Publishing. All rights reserved. No part of this excerpt may be reproduced or reprinted without permission in writing from the publisher.
Excerpts are provided by Dial-A-Book Inc. solely for the personal use of visitors to this web site.
"Descrizione articolo" può appartenere a un’altra edizione di questo titolo.
preigu
Osnabrück, Germania
Venditore AbeBooks dal 5 agosto 2024
Tariffe di spedizione da Germania a U.S.A.
| Articolo | Da 60 a 60 giorni lavorativi | Da 60 a 60 giorni lavorativi |
|---|---|---|
| Primo articolo | EUR 70,00 | EUR 70,00 |
Metodi di pagamento
- PayPal
Descrizione dello Store
preigu betreibt einen Onlineversandhandel mit über 1 Mio. Produkten in verschiedenen Sortimenten. Das Kernsortiment besteht aus Büchern, Medien und Spielwaren. Ein gelungenes Einkaufserlebnis ist das Ziel einer jeden Bestellung bei preigu, denn der Kunde und seine Zufriedenheit stehen an erster Stelle. preigu setzt daher auf einen kompetenten Kundenservice, funktionierende Prozesse und schnelle Reaktion.
Specializzazione
Bücher, SpielwarenInformazioni sull’azienda del venditore
preigu GmbH & Co. KG
Lengericher Landstraße 19
Osnabrück, Germania 49078
About Us
Legal website operator identification:
preigu GmbH & Co. KG
Lengericher Landstr. 19
49078 Osnabrück
Germany
Telephone: +49 (0) 541 / 580 72 84
Email: mail@preigu.de
VAT No: DE 455 380 498
AG Osnabrück - HRA 209647
PhG: preigu Verwaltung GmbH
AG Osnabrück - HRB 221793
CEO: Ansas Meyer
We are neither willing nor obliged to participate in dispute resolution proceedings before consumer arbitration boards.
We are a member of the initiative "FairCommerce" since 30.11.2016.
For more information, see: https://www.haendlerbund.de/de/haendlerbund/interessenvertretung/faircommerce
Condizioni di vendita
Standard Business Terms and customer information
I. Standard business terms
§ 1 Basic provisions
(1) The following terms and conditions of business apply for all contracts concluded with us as the supplier (preigu GmbH & Co. KG) via the websites AbeBooks and/or ZVAB. Unless otherwise agreed, the inclusion of your own terms and conditions is explicitly rejected.
(2) A ‘consumer' in the sense of the following regulations is every natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities. The term ‘businessman' refers to every natural person, legal person or legally responsible partnership that concludes a legal transaction in pursuance of his/its independent professional or commercial activity.
§ 2 Conclusion of the contract
(1) The subject-matter of the contract is the selling of products .
(2) If an article is placed by us with AbeBooks or ZVAB, the activation of the page on AbeBooks or ZVAB shall involve the binding offer to conclude a contract under the terms and conditions contained in the article page.
(3) The contract shall become effective via the online shopping cart system as follows:
The products intended for purchase are moved to the "shopping cart". You can select the "Shopping Cart" using the appropriate buttons on the navigation bar and make changes there at any time.
After calling up the "Checkout" page and entering the required personal data and payment and shipping conditions, all order information is then displayed again on the order summary page.
Before submitting the order, you have the ability once more to review or change any information here (you may also use the "back" button on the Internet browser), or to cancel the purchase.
By clicking the "Buy now" button to submit the order, you declare your legally binding acceptance of the order which makes the contract effective.
(4) The execution of the order and the sending of all the details necessitated by the conclusion of the contract take place via e-mail, in a partially-automated manner. Consequently, you have to ensure that the e-mail address that you have deposited with us is the correct one, and that the receipt of the respective e-mails is guaranteed. In particular, you have to ensure that the respective e-mails are not blocked by a SPAM filter.
§ 3 Right of retention, reservation of proprietary rights
(1) You can only exercise a right of retention if the situation in question involves claims arising from the same contractual relationship.
(2) The goods remain our property until the purchase price is paid in full.
§ 4 Warranty
(1) The statutory warranty rights are applicable.
(2) As a consumer, you are requested to promptly check the product for completeness, visible defects and transport damage as soon as it is delivered, and promptly disclose your complaints to us and the shipping company in writing. Even if you do not comply with this request, it shall have no effect on your legal warranty claims.
(3) If a characteristic of the goods deviates from the objective requirements, the deviation shall only be deemed to be agreed if you were informed of the same by us before submitting the contractual declaration and the deviation was expressly and separately agreed between the contracting parties.
§ 5 Choice of law, place of fulfilment, jurisdiction
(1) German law shall apply. This choice of law only applies to customers if it does not result in the revocation of the protection guaranteed by the mandatory provisions of the law of the country in which the respective customer's usual place of residence is located (benefit-of-the-doubt principle).
(2) If you are not a consumer, but a businessman, a legal entity under public law or an institutional fund governed by public law, our place of business is the place of jurisdiction as well as the place of fulfilment for all services that follow from the business relationships that exist with us. The same condition applies to situations in which you are not associated with a general place of jurisdiction in Germany or the EU, as well as situations in which the place of residence or the usual place of residence is not known at the time of commencement of proceedings. This has no bearing on the capacity to call upon the court associated with another place of jurisdiction.
(3) The provisions of the UN Convention on Contracts for the International Sale of Goods are explicitly inapplicable.
II. Customer information
- Identity of the seller
preigu GmbH & Co. KG
Lengericher Landstr. 19
49078 Osnabrück
Germany
Telephone: 0541-580 72 84
E-Mail: mail@preigu.de
We are neither willing nor obliged to participate in dispute resolution proceedings before consumer arbitration boards.
- Information regarding the conclusion of the contract
The technical steps associated with the conclusion of the contract, the contract conclusion itself and the correction options are executed in accordance to the regulations "conclusion of the contract" in our standard business terms (part I.).
- Contractual language, saving the text of the contract
3.1 Contract language shall be English.
3.2 The complete text of the contract is not saved with us. Before the order is sent, the contract data can be printed out or electronically saved using the browser's print function. After the order is received by us, the order data, the legally-mandated details related to distance selling contracts and the standard business terms are re-sent to you via e-mail.
- Main features of the product or service
The key features of the goods and/or services can be found in the respective quote.
- Prices and payment arrangements
5.1 The prices mentioned in the respective offers represent total prices, as do the shipping costs. They include all the price components, including all the incidental taxes.
5.2 The dispatch costs that are incurred are not included in the purchase price. They can be viewed by clicking the appropriate button on our website or in the respective quote, are shown separately over the course of the order transaction and must additionally be borne by you, insofar as free delivery is not confirmed.
5.3 If delivery is made to countries outside of the European Union, we may incur unreasonable additional costs, such as duties, taxes or money transfer fees (transfer or foreign exchange fees charged by the banks), which you must bear.
5.4 You must also bear the costs arising from money transfers in cases in which the delivery is made to an EU Member State, but the payment is initiated outside of the European Union.
5.5 The payment methods that are available to you are shown by clicking the appropriate button on our website or are disclosed in the respective quote.
5.6 Unless otherwise specified for the respective payment methods, the payment claims arising from the contract that has been concluded become payable immediately.
- Delivery conditions
6.1 The delivery conditions, delivery date and existing supply restrictions, if applicable, can be found by clicking the appropriate button on our website or in the respective quote.
Unless a different period is specified in the item description or our delivery conditions, the goods are delivered within 3-5 days after the conclusion of the contract (in case an advance payment has been agreed upon, after the payment authorisation).
6.2 If you are a consumer, the following is statutorily regulated: The risk of the sold item accidentally being destroyed or degraded during shipping only passes over to you when the item in question is delivered, regardless of whether or not the shipping operation is insured. This condition does not apply if you have independently commissioned a transport company that has not been specified by us or a person who has otherwise been appointed to execute the shipping operation.
- Statutory warranty right
Liability for defects is governed by the "Warranty" provisions in our General Terms and Conditions of Business (Part I).
Information on battery disposal
In connection with the sale of batteries or the delivery of devices containing batteries, we are obliged to inform you of the following:
Batteries must not be disposed of with household waste.
You can either return used batteries that we carry or have carried in our range as new batteries to us at your own expense or return them free of charge to our shipping warehouse (shipping address). Alternatively, you can hand in the batteries at your local collection points.
As an end user, you are legally obliged to return used batteries so that they can be recycled or disposed of properly.
Used batteries may contain harmful substances that can damage the environment or your health if not stored or disposed of properly. However, batteries also contain important raw materials such as iron, zinc, manganese or nickel and can be recycled.
The symbols on the batteries have the following meanings:
The symbol of the crossed-out wheelie bin means that the battery must not be disposed of with household waste.
For batteries containing a certain amount of lead, cadmium or mercury, the following additions below the symbol with the crossed-out wheelie bin indicate the respective pollutants:
Pb = Battery contains more than 0.004% lead by weight
Cd = Battery contains more than 0.002% cadmium by weight
Hg = Battery contains more than 0.0005% mercury by weight
Information on the costs involved in accordance with Article 56 (4) of the EU Battery Regulation (Regulation 2023/1542) can be found at the ‘Batterie-Zurück (https://www.batterie-zurueck.de/de/bewirtschaftungvonaltbatterien/)' initiative.
Please pay attention to the above instructions.
Diritto di recesso
Instructions for revocation
Right of withdrawal for the sale of goods
Revocation right for consumers
(A ‘consumer' is any natural person who concludes a legal transaction which, to an overwhelming extent, cannot be attributed to either his commercial or independent professional activities.)
Instructions for revocation
Revocation right
You have the right to revoke this contract within 14 days without specifying any reasons.
The revocation period is 14 days with effect from the day,
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the products, provided you had ordered one or more products within the scope of a standard order and this/these product/products is/are delivered uniformly;
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last product, provided you had ordered several products within the scope of a standard order and these products are delivered separately;
-
on which you or a third party nominated by you, which is not the carrier, had taken possession of the last part delivery or the last unit, provided you had ordered a product, which is delivered in several part deliveries or units;
To exercise your right of withdrawal, you must inform us (preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Telephone number: +49 (0) 541 / 580 72 84, E-Mail address: mail@preigu.de) by means of a clear declaration (e.g. a letter sent by post, or an e-mail) of your decision to withdraw from this contract. You can use the attached model withdrawal form for this purpose, which is, however, not mandatory.
You can also exercise your right of withdrawal online by clicking on a button labelled accordingly (such as ‘Withdraw from contract' or similar) on the AbeBooks/ZVAB website. If you use this online function, you will immediately receive a confirmation of receipt on a durable medium (e.g. via email) containing information on the content of the withdrawal notice, as well as the date and time of its receipt.
In order to safeguard the revocation period, it is sufficient that you send the notification about the exercise of the revocation right before the expiry of the revocation period.
Consequences of the revocation
If you revoke this contract, we shall repay all the payments, which we received from you, including the delivery costs (with the exception of additional costs, which arise from that fact that you selected a form of delivery other than the most reasonable standard delivery offered by us), immediately and at the latest within 14 days from the day on which we received the notification about the revocation of this contract from you. We use the same means of payment, which you had originally used during the original transaction, for this repayment unless expressly agreed otherwise with you; you will not be charged any fees owing to this repayment.
We can refuse the repayment until the products are returned to us or until you have furnished evidence that you have sent the products back to us, depending on whichever is earlier.
You must return or transfer the products to us immediately and, in any case, at the latest within 14 days with effect from the day on which you inform us of the revocation of this contract. The deadline is maintained if you send the products before the expiry of the 14 day deadline.
You bear the direct costs for returning the products.
You must pay for any depreciation of the products only if this depreciation can be attributed to any handling with you that was not necessary for checking the condition, features and functionality of the products.
Criteria for exclusion or expiry
The revocation right is not available for contracts
-
for delivery of products, which are not prefabricated and for whose manufacturing an individual selection or stipulation by the consumer is important or which are clearly tailored to the personal requirements of the consumer;
-
for delivery of products, which can spoil quickly or whose use-by date would be exceeded quickly;
-
for delivery of alcoholic drinks, whose price was agreed at the time of concluding the contract, which however can be delivered 30 days after the conclusion of the contract at the earliest and whose current value depends on the fluctuations in the market, on which the entrepreneur has no influence;
-
for delivery of newspapers, periodicals or magazines with the exception of subscription contracts. The revocation right expires prematurely in case of contracts
-
for delivery of sealed products, which are not suitable for return for reasons of health protection or hygiene if their seal has been removed after the delivery;
-
for delivery of products if they have been mixed inseparably with other goods after the delivery, owing to their condition;
-
for delivery of sound or video recording or computer software in a sealed package if the seal has been removed after the delivery.
Specimen - revocation form
(If you wish to revoke the contract, please fill up this form and send it back to us.)
-
To preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, Email address: mail@preigu.de :
-
I/we () herewith revoke the contract concluded by me/ us () regarding the purchase of the following products ()/
the provision of the following service () -
Ordered on ()/ received on ()
-
Name of the consumer(s)
-
Address of the consumer(s)
-
Signature of the consumer(s) (only in case of a notification on paper)
-
Date
(*) Cross out the incorrect option.
Privacy e sicurezza
Data protection declaration
Unless stated otherwise below, the provision of your personal data is neither legally nor contractually obligatory, nor required for conclusion of a contract. You are not obliged to provide your data. Not providing it will have no consequences. This only applies as long as the processing procedures below do not state otherwise.
"Personal data" is any information relating to an identified or identifiable natural person.
Responsible person
Contact us at any time. The person responsible for data processing is: Ansas Meyer, Lengericher Landstr. 19, 49078 Osnabrück Deutschland, +49 (0) 541 / 580 72 84, mail@preigu.de
Collection and processing when using the cancellation button
If you have entered into a contract via this platform for which a statutory right of cancellation applies, the platform provides you with a cancellation function (cancellation button) through which you can submit your notice of cancellation immediately.
When using the cancellation function, your personal data (name, email address, details identifying the contract or part of the contract you wish to withdraw from, and the time (date and time) of sending the notice of withdrawal) will only be collected to the extent that you have provided it.
The purpose of data processing is to provide you with the statutory option to withdraw from your contract and to ensure the proper processing of your withdrawal.
The platform operator collects your data on the basis of Article 6(1)(f) of the GDPR, namely the legitimate interest in ensuring the general accessibility of the statutory withdrawal function on the platform. You will receive a confirmation email from the platform operator acknowledging receipt of your notice of withdrawal.
The data is then transmitted to us by the platform operator.
If the contact relates to a contract already concluded between you and us, this data processing is carried out on the basis of Article 6(1)(b) of the GDPR. Otherwise, data processing is carried out on the basis of Article 6(1)(c) of the GDPR, to fulfil a legal obligation to provide an electronic withdrawal function.
We use your email address solely to process your notice of withdrawal. Your data will subsequently be deleted in accordance with statutory retention periods, provided you have not consented to further processing and use.
Collection, processing, and transfer of personal data in orders
When you submit an order we only collect and use your personal data insofar as this is necessary for the fulfilment and handling of your order as well as processing of your queries. The provision of data is necessary for conclusion of a contract. Failure to provide it will prevent the conclusion of any contract. The processing will occur on the basis of Article 6(1) b) GDPR and is required for the fulfilment of a contract with you.
Your data will be shared, for example, with shipping companies, dropshipping or fulfillment providers, payment service providers, service providers for order processing, and IT service providers. We will comply strictly with legal requirements in every case. The scope of data transmission is restricted to a minimum.
Duration of storage
After contractual processing has been completed, the data is initially stored for the duration of the warranty period, then in accordance with the retention periods prescribed by law, especially tax and commercial law, and then deleted after the period has elapsed, unless you have agreed to further processing and use.
Rights of the affected person
If the legal requirements are fulfilled, you have the following rights according to art. 15 to 20 GDPR: Right to information, correction, deletion, restriction of processing, data portability. You also have a right of objection against processing based on art. 6 (1) GDPR, and to processing for the purposes of direct marketing, according to art. 21 (1) GDPR.
Right to complain to the regulatory authority
You have the right to complain to the regulatory authority according to art. 77 GDPR if you believe that your data is not being processed legally.
You can lodge a complaint with, among others, the supervisory authority responsible for us, which you may reach at the following contact details:
Landesbeauftragte für den Datenschutz Niedersachsen Prinzenstraße 5 30159 Hannover Tel.: +49 511 1204500 Fax: +49 511 1204599 E-Mail: poststelle@lfd.niedersachsen.de
Right to object
If the data processing outlined here is based on our legitimate interests in accordance with Article 6(1)f) GDPR, you have the right for reasons arising from your particular situation to object at any time to the processing of your data with future effect.
If the objection is successful, we will no longer process the personal data, unless we can demonstrate compelling legitimate grounds for the processing that outweigh your interests or rights and freedoms, or the processing is intended for the assertion, exercise or defence of legal claims.