Vibro-Acoustic Sources in Lightweight Buildings
Mayr, Andreas
ISBN 10: 3832526986 ISBN 13: 9783832526986
Editore: Logos Verlag Berlin, 2010
Nuovi
Brossura
Da
Kennys Bookstore, Olney, MD, U.S.A.
Valutazione del venditore 5 su 5 stelle
Venditore AbeBooks dal 9 ottobre 2009
Questo articolo specifico non è più disponibile.
Riguardo questo articolo
Descrizione:
2010. Paperback. . . . . . Books ship from the US and Ireland. Codice articolo V9783832526986
Riassunto:
The work reported in this thesis addresses the problem of structure-borne sound transmission in buildings. Vibrating sources, such as services plant and domestic appliances, transmit vibro-acoustic power, causing noise complaints by occupants in rooms removed from the source room. There is not yet an accepted practical method of predicting the installed power into floors or supporting walls, and thence the resultant sound pressure in rooms. This study concentrates on the prediction of the installed power from mechanical installations in lightweight buildings composed of framed and ribbed plates. To identify the characteristics of such receiver elements, a field survey has been undertaken, which involved measurement of the point and transfer mobilities of common wall and floor structures. It is shown that the range of measured values of receiver point mobility is surprisingly small and that the constructions investigated often displayed thin plate-like characteristics, with relatively small spatial variations in point mobility. These field measurements give support to the notion of averaging over contacts. This single equivalent receiver mobility has been assembled both from measured data and from the approximate method and then used in combination with single equivalent source data, to yield an approximate prediction of the installed power. The agreement obtained between the exact and approximate values allowed consideration of a practical implementation of the approximate prediction method, based on a reception plate method which yields the activity and mobility of the tested machine as single equivalent values
Le informazioni nella sezione "Su questo libro" possono far riferimento a edizioni diverse di questo titolo.
Dati bibliografici
Titolo: Vibro-Acoustic Sources in Lightweight ...
Casa editrice: Logos Verlag Berlin
Data di pubblicazione: 2010
Legatura: Brossura
Condizione: New
I migliori risultati di ricerca su AbeBooks
Foto dell'editore
VibroAcoustic Sources in Lightweight Buildings
Da: ISD LLC, Bristol, CT, U.S.A.
Valutazione del venditore 5 su 5 stelle
paperback. Condizione: New. Codice articolo 369531
Compra nuovo
EUR 53,27
Spese di spedizione:
GRATIS
In U.S.A.
Quantità: 3 disponibili
Immagini fornite dal venditore
Vibro-Acoustic Sources in Lightweight Buildings
Da: GreatBookPrices, Columbia, MD, U.S.A.
Valutazione del venditore 5 su 5 stelle
Condizione: New. Codice articolo 21677143-n
Compra nuovo
EUR 71,78
Spese di spedizione:
EUR 2,28
In U.S.A.
Quantità: 4 disponibili
Immagini fornite dal venditore
Vibro-Acoustic Sources in Lightweight Buildings
Da: GreatBookPrices, Columbia, MD, U.S.A.
Valutazione del venditore 5 su 5 stelle
Condizione: As New. Unread book in perfect condition. Codice articolo 21677143
Compra usato
EUR 73,27
Spese di spedizione:
EUR 2,28
In U.S.A.
Quantità: 4 disponibili
Foto dell'editore
Vibro-Acoustic Sources in Lightweight Buildings (Paperback)
Editore:
Logos Verlag Berlin GmbH, Berlin, 2010
ISBN 10: 3832526986
ISBN 13: 9783832526986
Nuovo
Paperback
Da: Grand Eagle Retail, Bensenville, IL, U.S.A.
Valutazione del venditore 5 su 5 stelle
Paperback. Condizione: new. Paperback. The work reported in this thesis addresses the problem of structure-borne sound transmission in buildings. Vibrating sources, such as services plant and domestic appliances, transmit vibro-acoustic power, causing noise complaints by occupants in rooms removed from the source room. There is not yet an accepted practical method of predicting the installed power into floors or supporting walls, and thence the resultant sound pressure in rooms. This study concentrates on the prediction of the installed power from mechanical installations in lightweight buildings composed of framed and ribbed plates. To identify the characteristics of such receiver elements, a field survey has been undertaken, which involved measurement of the point and transfer mobilities of common wall and floor structures. It is shown that the range of measured values of receiver point mobility is surprisingly small and that the constructions investigated often displayed thin plate-like characteristics, with relatively small spatial variations in point mobility. These field measurements give support to the notion of averaging over contacts.This single equivalent receiver mobility has been assembled both from measured data and from the approximate method and then used in combination with single equivalent source data, to yield an approximate prediction of the installed power. The agreement obtained between the exact and approximate values allowed consideration of a practical implementation of the approximate prediction method, based on a reception plate method which yields the activity and mobility of the tested machine as single equivalent values Shipping may be from multiple locations in the US or from the UK, depending on stock availability. Codice articolo 9783832526986
Compra nuovo
EUR 74,12
Spese di spedizione:
GRATIS
In U.S.A.
Quantità: 1 disponibili
Foto dell'editore
Vibro-Acoustic Sources in Lightweight Buildings (Paperback)
Editore:
Logos Verlag Berlin GmbH, Berlin, 2010
ISBN 10: 3832526986
ISBN 13: 9783832526986
Nuovo
Paperback
Da: AussieBookSeller, Truganina, VIC, Australia
Valutazione del venditore 5 su 5 stelle
Paperback. Condizione: new. Paperback. The work reported in this thesis addresses the problem of structure-borne sound transmission in buildings. Vibrating sources, such as services plant and domestic appliances, transmit vibro-acoustic power, causing noise complaints by occupants in rooms removed from the source room. There is not yet an accepted practical method of predicting the installed power into floors or supporting walls, and thence the resultant sound pressure in rooms. This study concentrates on the prediction of the installed power from mechanical installations in lightweight buildings composed of framed and ribbed plates. To identify the characteristics of such receiver elements, a field survey has been undertaken, which involved measurement of the point and transfer mobilities of common wall and floor structures. It is shown that the range of measured values of receiver point mobility is surprisingly small and that the constructions investigated often displayed thin plate-like characteristics, with relatively small spatial variations in point mobility. These field measurements give support to the notion of averaging over contacts.This single equivalent receiver mobility has been assembled both from measured data and from the approximate method and then used in combination with single equivalent source data, to yield an approximate prediction of the installed power. The agreement obtained between the exact and approximate values allowed consideration of a practical implementation of the approximate prediction method, based on a reception plate method which yields the activity and mobility of the tested machine as single equivalent values Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability. Codice articolo 9783832526986
Compra nuovo
EUR 124,80
Spese di spedizione:
EUR 31,89
Da: Australia a: U.S.A.
Quantità: 1 disponibili