Yoo chai (25 risultati)

Soft cover. Condizione: New. Contents: 1. Modeling of AC Drives and Power Converter. 2. Control of Semiconductor Switches via PWM Technologies. 3. PID Control System Design for Electrical Drives and Power Converters. 4. PID Control System Implementation. 5. Tuning PID Control Systems with Experimental Validations. 6. FCS Predictive Control in d − q Reference Frame. 7. FCS Predictive Control in Reference Frame. 8. Discrete-time Model Predictive Control (DMPC) of Electrical Drives and Power Converter. 9. Continuous-time Model Predictive Control (CMPC) of Electrical Drives and PowerConverter. 10. MATLAB®/Simulink® Tutorials on Physical Modeling and Test-bed Setup. A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice. The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis. The book contains sections on closed-loop performance analysis in both frequency domain and time domain, presented to help the designer in selection of controller parameters and validation of the control system. Continuous-time model predictive control systems are designed for the drives and power supplies, and operational constraints are imposed in the design. Discrete-time model predictive control systems are designed based on the discretization of the physical models, which will appeal to readers who are more familiar with sampled-data control system. Soft sensors and observers will be discussed for low cost implementation. Resonant control of the electric drives and power supply will be discussed to deal with the problems of bias in sensors and unbalanced three phase AC currents.…

Hardcover. Condizione: Very Good. 1. It's a well-cared-for item that has seen limited use. The item may show minor signs of wear. All the text is legible, with all pages included. It may have slight markings and/or highlighting.

Hardcover. Condizione: UsedVeryGood. Hardcover; light fading, scuffing, and shelf wear to the cover; light spott ing to end pages and page edges; otherwise in very good condition with clea n text and tight binding.

Condizione: Good. Your purchase helps support Sri Lankan Children's Charity 'The Rainbow Centre'. Ex-library, so some stamps and wear, but in good overall condition. Our donations to The Rainbow Centre have helped provide an education and a safe haven to hundreds of children who live in appalling conditions.…

Condizione: New.

Condizione: As New. Unread book in perfect condition.

Condizione: As New. Unread book in perfect condition.

Condizione: New.

Condizione: New.

Condizione: New. In English.

Condizione: As New. Unread book in perfect condition.

Hardback. Condizione: New. A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice.  The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis.    The book contains sections on closed-loop performance analysis in both frequency domain and time domain, presented to help the designer in selection of controller parameters and validation of the control system.  Continuous-time model predictive control systems are designed for the drives and power supplies, and operational constraints are imposed in the design.    Discrete-time model predictive control systems are designed based on the discretization of the physical models, which will appeal to readers who are more familiar with sampled-data control system. Soft sensors and observers will be discussed for low cost implementation.  Resonant control of the electric drives and power supply will be discussed to deal with the problems of bias in sensors and unbalanced three phase AC currents. Brings together both classical control systems and predictive control systems in a logical style from introductory through to advanced levelsDemonstrates how simulation and experimental results are used to support theoretical analysis and the proposed design algorithmsMATLAB and Simulink tutorials are given in each chapter to show the readers how to take the theory to applications. Includes MATLAB and Simulink software using xPC Target for teaching purposesA companion website is available Researchers and industrial engineers; and graduate students on electrical engineering courses will find this a valuable resource.…

Condizione: New.

Condizione: As New. Unread book in perfect condition.

Unknown Binding. Condizione: New. Brand new book, sourced directly from publisher. Dispatch time is 6-7 days from our warehouse. Book will be sent in robust, secure packaging to ensure it reaches you securely.

Condizione: New. In English.

Condizione: New.

Gebunden. Condizione: New. Balanced presentation for both theory and practice Well-blended contents covering elementary to advanced topics Detailed presentation of the developmentThe current trend of building more streamlined structures has.

Condizione: New. pp. 538 Index.

Hardback. Condizione: New. A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice.  The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis.    The book contains sections on closed-loop performance analysis in both frequency domain and time domain, presented to help the designer in selection of controller parameters and validation of the control system.  Continuous-time model predictive control systems are designed for the drives and power supplies, and operational constraints are imposed in the design.    Discrete-time model predictive control systems are designed based on the discretization of the physical models, which will appeal to readers who are more familiar with sampled-data control system. Soft sensors and observers will be discussed for low cost implementation.  Resonant control of the electric drives and power supply will be discussed to deal with the problems of bias in sensors and unbalanced three phase AC currents. Brings together both classical control systems and predictive control systems in a logical style from introductory through to advanced levelsDemonstrates how simulation and experimental results are used to support theoretical analysis and the proposed design algorithmsMATLAB and Simulink tutorials are given in each chapter to show the readers how to take the theory to applications. Includes MATLAB and Simulink software using xPC Target for teaching purposesA companion website is available Researchers and industrial engineers; and graduate students on electrical engineering courses will find this a valuable resource.…

Condizione: New. pp. 538 14:B&W 6 x 9 in or 229 x 152 mm Case Laminate on White w/Gloss Lam.

octavo illus light card covers xi + 673pp INSCRIBED and SIGNED by author Nakai and his calling card laid in, VG.

Buch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The current trend of building more streamlined structures has made stability analysis a subject of extreme importance. It is mostly a safety issue because Stability loss could result in an unimaginable catastrophe. Written by two authors with a combined 80 years of professional and academic experience, the objective of Stability of Structures: Principles and Applications is to provide engineers and architects with a firm grasp of the fundamentals and principles that are essential to performing effective stability analysts. Concise and readable, this guide presents stability analysis within the context of elementary nonlinear flexural analysis, providing a strong foundation for incorporating theory into everyday practice. The first chapter introduces the buckling of columns. It begins with the linear elastic theory and proceeds to include the effects of large deformations and inelastic behavior. In Chapter 2 various approximate methods are illustrated along with the fundamentals of energy methods. The chapter concludes by introducing several special topics, some advanced, that are useful in understanding the physical resistance mechanisms and consistent and rigorous mathematical analysis. Chapters 3 and 4 cover buckling of beam-columns. Chapter 5 presents torsion in structures in some detail, which is one of the least well understood subjects in the entire spectrum of structural mechanics. Strictly speaking, torsion itself does not belong to a topic in structural stability, but needs to be covered to some extent for a better understanding of buckling accompanied with torsional behavior. Chapters 6 and 7 consider stability of framed structures in conjunction with torsional behavior of structures. Chapters 8 to 10 consider buckling of plate elements, cylindrical shells, and general shells. Although the book is primarily devoted to analysis, rudimentary design aspects are discussed. 538 pp. Englisch.…

Buch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The current trend of building more streamlined structures has made stability analysis a subject of extreme importance. It is mostly a safety issue because Stability loss could result in an unimaginable catastrophe. Written by two authors with a combined 80 years of professional and academic experience, the objective of Stability of Structures: Principles and Applications is to provide engineers and architects with a firm grasp of the fundamentals and principles that are essential to performing effective stability analysts. Concise and readable, this guide presents stability analysis within the context of elementary nonlinear flexural analysis, providing a strong foundation for incorporating theory into everyday practice. The first chapter introduces the buckling of columns. It begins with the linear elastic theory and proceeds to include the effects of large deformations and inelastic behavior. In Chapter 2 various approximate methods are illustrated along with the fundamentals of energy methods. The chapter concludes by introducing several special topics, some advanced, that are useful in understanding the physical resistance mechanisms and consistent and rigorous mathematical analysis. Chapters 3 and 4 cover buckling of beam-columns. Chapter 5 presents torsion in structures in some detail, which is one of the least well understood subjects in the entire spectrum of structural mechanics. Strictly speaking, torsion itself does not belong to a topic in structural stability, but needs to be covered to some extent for a better understanding of buckling accompanied with torsional behavior. Chapters 6 and 7 consider stability of framed structures in conjunction with torsional behavior of structures. Chapters 8 to 10 consider buckling of plate elements, cylindrical shells, and general shells. Although the book is primarily devoted to analysis, rudimentary design aspects are discussed.…

Hardback. Condizione: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.