9780792339939 - fatigue under thermal and mechanical loading: mechanisms, mechanics and modelling (15 risultati)
- Rilegato
Da: Buchpark, Trebbin, , GermaniaBuchpark
Contatta il venditoreVenditore con 5 stelleCondizione: Usato - Ottimo
EUR 20,93
EUR 105,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Condizione: Sehr gut. Zustand: Sehr gut | Seiten: 524 | Sprache: Englisch | Produktart: Bücher | The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and…by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
- Rilegato
Da: Ria Christie Collections, Uxbridge, Regno UnitoRia Christie Collections
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 225,15
EUR 13,85 spedizioneSpedito da Regno Unito a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. In.
Fatigue Under Thermal and Mechanical Loading : Mechanism, Mechanics and Modelling : Proceedings of the Symposium Held at Petten, the Netherlands, 22-24 May 1995
Bressers, J. (EDT); Remy, L. (EDT); Steen, M. (EDT); Valles, Jose Luis Canet (EDT)
- Rilegato
Da: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 239,15
EUR 2,27 spedizioneSpedito in U.S.A.Quantità: 15 disponibili
Condizione: New.
- Rilegato
Da: Kennys Bookshop and Art Galleries Ltd., Galway, GY, IrlandaKennys Bookshop and Art Galleries Ltd.
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 260,86
EUR 10,50 spedizioneSpedito da Irlanda a U.S.A.Quantità: 15 disponibili
Condizione: New. Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 Editor(s): Bressers, J.; Remy, L. Num Pages: 520 pages, biography. BIC Classification: TGM. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 28. Weight in Grams: 901. . 1996. Hardback. . . . .
- Rilegato
Da: Books Puddle, New York, NY, U.S.A.Books Puddle
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 277,92
EUR 3,44 spedizioneSpedito in U.S.A.Quantità: 4 disponibili
Condizione: New. pp. 520.
- Rilegato
Da: AHA-BUCH GmbH, Einbeck, GermaniaAHA-BUCH GmbH
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 223,11
EUR 64,73 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Buch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~s…e de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.
- Rilegato
Da: Mispah books, Redhill, SURRE, Regno UnitoMispah books
Contatta il venditoreVenditore con 4 stelleCondizione: Usato - Come nuovo
EUR 301,34
EUR 28,91 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 1 disponibili
Hardcover. Condizione: Like New. Like New. book.
- Rilegato
Da: Kennys Bookstore, Olney, MD, U.S.A.Kennys Bookstore
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 326,06
EUR 9,04 spedizioneSpedito in U.S.A.Quantità: 15 disponibili
Condizione: New. Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 Editor(s): Bressers, J.; Remy, L. Num Pages: 520 pages, biography. BIC Classification: TGM. Category: (P) Professional & Vocational. Dimension: 234 x 156 x 28. Weight in Grams: 901. . 1996. Hardback. . . . . Books ship from the US and I…reland.
Fatigue Under Thermal and Mechanical Loading : Mechanism, Mechanics and Modelling : Proceedings of the Symposium Held at Petten, the Netherlands, 22-24 May 1995
Bressers, J. (EDT); Remy, L. (EDT); Steen, M. (EDT); Valles, Jose Luis Canet (EDT)
- Rilegato
Da: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contatta il venditoreVenditore con 5 stelleCondizione: Usato - Come nuovo
EUR 337,55
EUR 2,27 spedizioneSpedito in U.S.A.Quantità: 15 disponibili
Condizione: As New. Unread book in perfect condition.
- Rilegato
- Print on Demand
Da: moluna, Greven, , Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 180,07
EUR 48,99 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Gebunden. Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Proceedings of the Symposium held at Petten, the Netherlands, 22-24 May 1995 The International Symposium Fatigue under Thermal and Mechanical Loading , held at Petten (The Netherlands) on May 22-24, 1995, w…as jointly organized by the Institute for.
- Rilegato
- Print on Demand
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, , GermaniaBuchWeltWeit Ludwig Meier e.K.
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 213,99
EUR 23,00 spedizioneSpedito da Germania a U.S.A.Quantità: 2 disponibili
Buch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by th…e Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies. 524 pp. Englisch.
- Rilegato
- Print on Demand
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 186,70
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Buch. Condizione: Neu. Fatigue under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling | L. Rémy (u. a.) | Buch | Einband - fest (Hardcover) | Englisch | 1996 | Springer Netherland | EAN 9780792339939 | Verantwortliche Person für die EU: Springer Netherlands, Haberstr. 7, 69126 Heidelberg, buchhandel-buch[at]sp…ringer[dot]com | Anbieter: preigu Print on Demand.
Lingua: Inglese
Editore: Springer Netherlands, Springer Netherlands Apr 1996 1996
- Rilegato
- Print on Demand
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germaniabuchversandmimpf2000
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 213,99
EUR 60,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Buch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The International Symposium 'Fatigue under Thermal and Mechanical Loading', held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the So…ciete Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies. 524 pp. Englisch.
- Rilegato
- Print on Demand
Da: Majestic Books, Hounslow, , Regno UnitoMajestic Books
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 293,13
EUR 7,52 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 4 disponibili
Condizione: New. Print on Demand pp. 520 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.
- Rilegato
- Print on Demand
Da: Biblios, frankfurt am main, HESSE, GermaniaBiblios
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 293,42
EUR 9,95 spedizioneSpedito da Germania a U.S.A.Quantità: 4 disponibili
Condizione: New. PRINT ON DEMAND pp. 520.
