9783031357787 - proceedings of the 3rd conference on physical modeling for virtual manufacturing systems and processes (20 risultati)
- Rilegato
- Prima edizione
Da: Grand Eagle Retail, Bensenville, IL, U.S.A.Grand Eagle Retail
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 46,01
Spedizione gratuitaSpedito in U.S.A.Quantità: 1 disponibili
Hardcover. Condizione: new. Hardcover. This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University… of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing. Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (EDT); Garth, Christoph (EDT); Linke, Barbara S. (EDT)
- Rilegato
Da: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 43,66
EUR 2,29 spedizioneSpedito in U.S.A.Quantità: Più di 20 disponibili
Condizione: New.
- Rilegato
Da: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 38,22
EUR 6,80 spedizioneSpedito da Italia a U.S.A.Quantità: Più di 20 disponibili
Condizione: new.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (EDT); Garth, Christoph (EDT); Linke, Barbara S. (EDT)
- Rilegato
Da: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contatta il venditoreVenditore con 5 stelleCondizione: Usato - Come nuovo
EUR 51,92
EUR 2,29 spedizioneSpedito in U.S.A.Quantità: Più di 20 disponibili
Condizione: As New. Unread book in perfect condition.
- Rilegato
Da: Ria Christie Collections, Uxbridge, Regno UnitoRia Christie Collections
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 48,75
EUR 13,98 spedizioneSpedito da Regno Unito a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. In.
- Rilegato
Da: Brook Bookstore, Milano, MI, ItaliaBrook Bookstore
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 33,48
EUR 27,99 spedizioneSpedito da Italia a U.S.A.Quantità: Più di 20 disponibili
Condizione: new.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (EDT); Garth, Christoph (EDT); Linke, Barbara S. (EDT)
- Rilegato
Da: GreatBookPricesUK, Woodford Green, Regno UnitoGreatBookPricesUK
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 48,04
EUR 17,50 spedizioneSpedito da Regno Unito a U.S.A.Quantità: Più di 20 disponibili
Condizione: New.
- Rilegato
Da: Books Puddle, New York, NY, U.S.A.Books Puddle
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 65,46
EUR 3,47 spedizioneSpedito in U.S.A.Quantità: 4 disponibili
Condizione: New.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (EDT); Garth, Christoph (EDT); Linke, Barbara S. (EDT)
- Rilegato
Da: GreatBookPricesUK, Woodford Green, Regno UnitoGreatBookPricesUK
Contatta il venditoreVenditore con 5 stelleCondizione: Usato - Come nuovo
EUR 53,24
EUR 17,50 spedizioneSpedito da Regno Unito a U.S.A.Quantità: Più di 20 disponibili
Condizione: As New. Unread book in perfect condition.
- Altre immagini
- Rilegato
Da: Studibuch, Stuttgart, GermaniaStudibuch
Contatta il venditoreVenditore con 5 stelleCondizione: Usato - Molto buono
EUR 8,20
EUR 62,30 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
hardcover. Condizione: Gut. 308 Seiten; 9783031357787.3 Gewicht in Gramm: 1.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (Edited by)/ Garth, Christoph (Edited by)/ Linke, Barbara S. (Edited by)
- Rilegato
Da: Revaluation Books, Exeter, Regno UnitoRevaluation Books
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 74,63
EUR 14,59 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 2 disponibili
Hardcover. Condizione: Brand New. 308 pages. 9.25x6.10x0.91 inches. In Stock.
- Rilegato
- Prima edizione
Da: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 75,55
EUR 32,15 spedizioneSpedito da Australia a U.S.A.Quantità: 1 disponibili
Hardcover. Condizione: new. Hardcover. This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University… of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing. Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
- Altre immagini
Lingua: Inglese
Editore: Springer International Publishing, Springer International Publishing, 2023
- Rilegato
Da: AHA-BUCH GmbH, Einbeck, GermaniaAHA-BUCH GmbH
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 42,79
EUR 63,18 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Buch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, theUniversity of… California Berkeley,and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.
- Rilegato
- Print on Demand
Da: Basi6 International, Irving, TX, U.S.A.Basi6 International
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 53,51
Spedizione gratuitaSpedito in U.S.A.Quantità: 10 disponibili
Condizione: Brand New. New. Delivery takes 20-25 days. Print on Demand.
Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes
Aurich, Jan C. (Edited by)/ Garth, Christoph (Edited by)/ Linke, Barbara S. (Edited by)
- Rilegato
- Print on Demand
Da: Revaluation Books, Exeter, Regno UnitoRevaluation Books
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 42,05
EUR 14,59 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 2 disponibili
Hardcover. Condizione: Brand New. 308 pages. 9.25x6.10x0.91 inches. In Stock. This item is printed on demand.
- Altre immagini
- Rilegato
- Print on Demand
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermaniaBuchWeltWeit Ludwig Meier e.K.
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 42,79
EUR 23,00 spedizioneSpedito da Germania a U.S.A.Quantità: 2 disponibili
Buch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern,…theUniversity of California Berkeley,and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing. 312 pp. Englisch.
- Rilegato
- Print on Demand
Da: Majestic Books, Hounslow, Regno UnitoMajestic Books
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 62,50
EUR 7,58 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 4 disponibili
Condizione: New. Print on Demand.
- Rilegato
- Print on Demand
Da: Biblios, frankfurt am main, HESSE, GermaniaBiblios
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 63,50
EUR 9,95 spedizioneSpedito da Germania a U.S.A.Quantità: 4 disponibili
Condizione: New. PRINT ON DEMAND.
- Altre immagini
- Rilegato
- Print on Demand
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 39,60
EUR 48,99 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Gebunden. Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Is an open access bookReports the results of nine years research of the International Research Training Group 2057Covers topics on process and factory planning in manufacturingPresents results of a collabor…ation TU Kaiserslautern and.
- Altre immagini
Lingua: Inglese
Editore: Springer, Springer International Publishing Jul 2023, 2023
- Rilegato
- Print on Demand
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germaniabuchversandmimpf2000
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 42,79
EUR 60,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Buch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the…University of California Berkeley, and University of California Davis.The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available.This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 312 pp. Englisch.
