Articoli correlati a Electrical Discharge Machining using Powder-Mixed Dielectric
Sinossi
Electrical discharge machining (EDM) is one of the most widely disseminated manufacturing technologies, in particular as regards the generation of accurate and complex geometrical shapes on hard metallic components. Nevertheless, current EDM has major limitations when dealing with fine surface finish and material removal rate. Recently EDM with powder mixed dielectric (PMEDM) has been a focus of intense research work in order to overcome these technological performance barriers. The present study is done with an objective to modify the machining characteristics like surface roughness, material removal rate, and hardness by adding different concentrations of TiO2 into the dielectric fluid of EDM. XRD and MAPING analysis has been carried out to find the migration of powder from the dielectric to the machined surface. SEM of the surface and the cross-section is also done to analyze the surface texture and recast layer. The results achieved show that minor amount of powder was migrated to machined surface, which resulted in surface improvement. The dielectric with added powder also shows significant improvement in material removal rate.
Le informazioni nella sezione "Riassunto" possono far riferimento a edizioni diverse di questo titolo.
L'autore
Sukhpal Singh Chatha and Hazoor Singh, working as faculty of Mechanical Engineering with Punjabi University Guru Kashi Campus, Talwandi Sabo, Punjab, India.
Le informazioni nella sezione "Su questo libro" possono far riferimento a edizioni diverse di questo titolo.
Risultati della ricerca per Electrical Discharge Machining using Powder-Mixed Dielectric
Immagini fornite dal venditore
Electrical Discharge Machining using Powder-Mixed Dielectric
Editore:
LAP LAMBERT Academic Publishing Mär 2014, 2014
ISBN 10: 3659525138
ISBN 13: 9783659525131
Nuovo
Taschenbuch
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Electrical discharge machining (EDM) is one of the most widely disseminated manufacturing technologies, in particular as regards the generation of accurate and complex geometrical shapes on hard metallic components. Nevertheless, current EDM has major limitations when dealing with fine surface finish and material removal rate. Recently EDM with powder mixed dielectric (PMEDM) has been a focus of intense research work in order to overcome these technological performance barriers. The present study is done with an objective to modify the machining characteristics like surface roughness, material removal rate, and hardness by adding different concentrations of TiO2 into the dielectric fluid of EDM. XRD and MAPING analysis has been carried out to find the migration of powder from the dielectric to the machined surface. SEM of the surface and the cross-section is also done to analyze the surface texture and recast layer. The results achieved show that minor amount of powder was migrated to machined surface, which resulted in surface improvement. The dielectric with added powder also shows significant improvement in material removal rate. 60 pp. Englisch. Codice articolo 9783659525131
Compra nuovo
EUR 39,90
Spedizione EUR 23,00
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: 2 disponibili
Foto dell'editore
Electrical Discharge Machining Using Powder-Mixed Dielectric
Editore:
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2014
ISBN 10: 3659525138
ISBN 13: 9783659525131
Nuovo
Brossura
Da: Books Puddle, Woodside, NY, U.S.A.
Valutazione del venditore 4 su 5 stelle
Condizione: New. pp. 60. Codice articolo 26127999389
Compra nuovo
EUR 65,58
Spedizione EUR 3,56
Spedito in U.S.A.
Spedito in U.S.A.
Quantità: 4 disponibili
Foto dell'editore
Electrical Discharge Machining Using Powder-Mixed Dielectric
Editore:
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2014
ISBN 10: 3659525138
ISBN 13: 9783659525131
Nuovo
Brossura
Da: Majestic Books, Hounslow, Regno Unito
Valutazione del venditore 4 su 5 stelle
Condizione: New. Print on Demand pp. 60 2:B&W 6 x 9 in or 229 x 152 mm Perfect Bound on Creme w/Gloss Lam. Codice articolo 131506754
Compra nuovo
EUR 65,26
Spedizione EUR 7,66
Spedito da Regno Unito a U.S.A.
Spedito da Regno Unito a U.S.A.
Quantità: 4 disponibili
Foto dell'editore
Electrical Discharge Machining Using Powder-Mixed Dielectric
Editore:
VDM Verlag Dr. Mueller Aktiengesellschaft & Co. KG, 2014
ISBN 10: 3659525138
ISBN 13: 9783659525131
Nuovo
Brossura
Da: Biblios, Frankfurt am main, HESSE, Germania
Valutazione del venditore 4 su 5 stelle
Condizione: New. PRINT ON DEMAND pp. 60. Codice articolo 18127999383
Compra nuovo
EUR 64,98
Spedizione EUR 9,95
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: 4 disponibili
Immagini fornite dal venditore
Electrical Discharge Machining using Powder-Mixed Dielectric
Editore:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659525138
ISBN 13: 9783659525131
Nuovo
Taschenbuch
Da: AHA-BUCH GmbH, Einbeck, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Electrical discharge machining (EDM) is one of the most widely disseminated manufacturing technologies, in particular as regards the generation of accurate and complex geometrical shapes on hard metallic components. Nevertheless, current EDM has major limitations when dealing with fine surface finish and material removal rate. Recently EDM with powder mixed dielectric (PMEDM) has been a focus of intense research work in order to overcome these technological performance barriers. The present study is done with an objective to modify the machining characteristics like surface roughness, material removal rate, and hardness by adding different concentrations of TiO2 into the dielectric fluid of EDM. XRD and MAPING analysis has been carried out to find the migration of powder from the dielectric to the machined surface. SEM of the surface and the cross-section is also done to analyze the surface texture and recast layer. The results achieved show that minor amount of powder was migrated to machined surface, which resulted in surface improvement. The dielectric with added powder also shows significant improvement in material removal rate. Codice articolo 9783659525131
Compra nuovo
EUR 40,38
Spedizione EUR 35,00
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: 1 disponibili
Immagini fornite dal venditore
Electrical Discharge Machining using Powder-Mixed Dielectric
Editore:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659525138
ISBN 13: 9783659525131
Nuovo
Brossura
Da: moluna, Greven, Germania
Valutazione del venditore 5 su 5 stelle
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Chatha Sukhpal SinghSukhpal Singh Chatha and Hazoor Singh, working as faculty of Mechanical Engineering with Punjabi University Guru Kashi Campus, Talwandi Sabo, Punjab, India.Electrical discharge machining (EDM) is one of the mo. Codice articolo 5162419
Compra nuovo
EUR 34,25
Spedizione EUR 48,99
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: Più di 20 disponibili
Immagini fornite dal venditore
Electrical Discharge Machining using Powder-Mixed Dielectric
Editore:
LAP LAMBERT Academic Publishing Mär 2014, 2014
ISBN 10: 3659525138
ISBN 13: 9783659525131
Nuovo
Taschenbuch
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Electrical discharge machining (EDM) is one of the most widely disseminated manufacturing technologies, in particular as regards the generation of accurate and complex geometrical shapes on hard metallic components. Nevertheless, current EDM has major limitations when dealing with fine surface finish and material removal rate. Recently EDM with powder mixed dielectric (PMEDM) has been a focus of intense research work in order to overcome these technological performance barriers. The present study is done with an objective to modify the machining characteristics like surface roughness, material removal rate, and hardness by adding different concentrations of TiO2 into the dielectric fluid of EDM. XRD and MAPING analysis has been carried out to find the migration of powder from the dielectric to the machined surface. SEM of the surface and the cross-section is also done to analyze the surface texture and recast layer. The results achieved show that minor amount of powder was migrated to machined surface, which resulted in surface improvement. The dielectric with added powder also shows significant improvement in material removal rate.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 60 pp. Englisch. Codice articolo 9783659525131
Compra nuovo
EUR 39,90
Spedizione EUR 60,00
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: 1 disponibili
Immagini fornite dal venditore
Electrical Discharge Machining using Powder-Mixed Dielectric
Editore:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659525138
ISBN 13: 9783659525131
Nuovo
Taschenbuch
Da: preigu, Osnabrück, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. Electrical Discharge Machining using Powder-Mixed Dielectric | Sukhpal Singh Chatha (u. a.) | Taschenbuch | 60 S. | Englisch | 2014 | LAP LAMBERT Academic Publishing | EAN 9783659525131 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Codice articolo 105336262
Compra nuovo
EUR 36,35
Spedizione EUR 70,00
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: 5 disponibili
Foto dell'editore
Electrical Discharge Machining using Powder-Mixed Dielectric
Editore:
LAP LAMBERT Academic Publishing, 2014
ISBN 10: 3659525138
ISBN 13: 9783659525131
Nuovo
paperback
Da: Mispah books, Redhill, SURRE, Regno Unito
Valutazione del venditore 4 su 5 stelle
paperback. Condizione: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book. Codice articolo ERICA82936595251386
Compra nuovo
EUR 151,72
Spedizione EUR 29,46
Spedito da Regno Unito a U.S.A.
Spedito da Regno Unito a U.S.A.
Quantità: 1 disponibili