Articoli correlati a Non-Destructive Testing of Metallic 3D Printed Specimens
Sinossi
The need for innovation in the manufacturing industry to meet the consumer's fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens.
Le informazioni nella sezione "Riassunto" possono far riferimento a edizioni diverse di questo titolo.
Compra nuovo
Visualizza questo articolo
EUR 29,02
EUR 9,70 per la spedizione da Germania a Italia
Destinazione, tempi e costiRisultati della ricerca per Non-Destructive Testing of Metallic 3D Printed Specimens
Immagini fornite dal venditore
Non-Destructive Testing of Metallic 3D Printed Specimens
Editore:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Nuovo
Brossura
Da: moluna, Greven, Germania
Valutazione del venditore 5 su 5 stelle
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Wong Brian StephenDr B. Stephen Wong has been a lecturer in Nanyang Technological University, Singapore for 27 years, mostly with the School of Mechanical and Aerospace Engineering, where he presents course modules and conducts resea. Codice articolo 158876313
Quantità: Più di 20 disponibili
Foto dell'editore
NonDestructive Testing of Metallic 3D Printed Specimens
Print on DemandDa: PBShop.store US, Wood Dale, IL, U.S.A.
Valutazione del venditore 5 su 5 stelle
PAP. Condizione: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Codice articolo L0-9783659757549
Quantità: Più di 20 disponibili
Foto dell'editore
NonDestructive Testing of Metallic 3D Printed Specimens
Print on DemandDa: PBShop.store UK, Fairford, GLOS, Regno Unito
Valutazione del venditore 5 su 5 stelle
PAP. Condizione: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Codice articolo L0-9783659757549
Quantità: Più di 20 disponibili
Foto dell'editore
Non-Destructive Testing of Metallic 3D Printed Specimens
Editore:
LAP Lambert Academic Publishing, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Nuovo
Brossura
Da: Ria Christie Collections, Uxbridge, Regno Unito
Valutazione del venditore 5 su 5 stelle
Condizione: New. In. Codice articolo ria9783659757549_new
Quantità: Più di 20 disponibili
Foto dell'editore
Non-Destructive Testing of Metallic 3D Printed Specimens
Editore:
LAP Lambert Academic Publishing, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Nuovo
Brossura
Da: California Books, Miami, FL, U.S.A.
Valutazione del venditore 5 su 5 stelle
Condizione: New. Codice articolo I-9783659757549
Quantità: Più di 20 disponibili
Immagini fornite dal venditore
Non-Destructive Testing of Metallic 3D Printed Specimens
Editore:
LAP LAMBERT Academic Publishing Jul 2015, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Nuovo
Taschenbuch
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The need for innovation in the manufacturing industry to meet the consumer's fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens. 92 pp. Englisch. Codice articolo 9783659757549
Quantità: 2 disponibili
Immagini fornite dal venditore
Non-Destructive Testing of Metallic 3D Printed Specimens (Paperback or Softback)
Editore:
LAP Lambert Academic Publishing 7/29/2015, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Nuovo
Paperback or Softback
Da: BargainBookStores, Grand Rapids, MI, U.S.A.
Valutazione del venditore 5 su 5 stelle
Paperback or Softback. Condizione: New. Non-Destructive Testing of Metallic 3D Printed Specimens 0.32. Book. Codice articolo BBS-9783659757549
Quantità: 5 disponibili
Immagini fornite dal venditore
Non-Destructive Testing of Metallic 3D Printed Specimens
Editore:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Nuovo
Taschenbuch
Da: AHA-BUCH GmbH, Einbeck, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The need for innovation in the manufacturing industry to meet the consumer's fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens. Codice articolo 9783659757549
Quantità: 1 disponibili
Immagini fornite dal venditore
Non-Destructive Testing of Metallic 3D Printed Specimens
Editore:
LAP LAMBERT Academic Publishing Jul 2015, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Nuovo
Taschenbuch
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The need for innovation in the manufacturing industry to meet the consumer¿s fast changing preference has led to additive manufacturing (AM). Additive manufacturing works around the idea of material addition for product formation instead of conventional ways of subtracting material. Due to AM being an emerging technology, many procedures and processing parameters are not standardized, as it remained challenging for industries to produce parts that are defect free. Porosity level of the end product is of interest to the manufacturers as it reveals the material properties and microstructure of the end product. It is critical to all industries to ensure that the parts fabricated with AM are structurally sound and is safe for use in different types of operation. Thus, this book will investigate the use of non-destructive testing, specifically ultrasonic testing (UT), on metallic printed specimens for flaw detection and quantification of porosity content. This book will also do a comparison of UT against other non-destructive testing methods and conclude that the best technique used for flaw characterization in metallic three-dimensional (3D) printed specimens.Books on Demand GmbH, Überseering 33, 22297 Hamburg 92 pp. Englisch. Codice articolo 9783659757549
Quantità: 1 disponibili
Foto dell'editore
Non-Destructive Testing of Metallic 3D Printed Specimens
Editore:
LAP Lambert Academic Publishing 2015-07-29, 2015
ISBN 10: 3659757543
ISBN 13: 9783659757549
Nuovo
Paperback
Da: Chiron Media, Wallingford, Regno Unito
Valutazione del venditore 4 su 5 stelle
Paperback. Condizione: New. Codice articolo 6666-IUK-9783659757549
Quantità: 10 disponibili