Articoli correlati a Design & Cost Estimation of Ethylene Production...
Design & Cost Estimation of Ethylene Production Unit From Naphta: Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS - Brossura
Sinossi
Ethylene is widely used in chemical industry, and its worldwide production(over 109 million tonnes in 2006) exceeds that of any other organic compound. Commercially ethylene is obtained by(1)thermal cracking of hydrocarbons such as ethane, propane, butane, naphtha, kerosene, gasoil, crude oil,etc,(2) auto thermic cracking (partial oxidation) of the above hydrocarbons,(3)recovery from refinery off-gas,(4) recovery from coke-oven gas, and(5) catalytic dehydration of ethyl alcohol or ethyl ether. The thermal cracking process is the most interesting process to produce ethylene commercially .At this project production of ethylene from naphtha is studied. Naphtha, an important feedstock for ethylene production, is a collective of liquid hydrocarbon intermediate oil refining products. It is a mixture of hydrocarbons in the boiling point range of 30-200ºC. it is fed to the naphtha cracking furnace. Then, the cracked gas is fed to gasoline fractionator, where it separates the quench oil as a bottom and the cracked gasoline and lighter components as the overhead products. Then, the overhead products are separated in different column.
Le informazioni nella sezione "Riassunto" possono far riferimento a edizioni diverse di questo titolo.
L'autore
Aref Shahi: M.Sc in Chemical Engineering, Abadan Petroleum University of Technology,2014.B.Sc in Chemical Engineering,Babol Noshirvani University of Technology,2012.Three years, industry oriented Research with focus on pyrolysis of polymers, Heavy Vacuum Gas Oil, environmental friendly processes, CFD modeling, process simulation and optimization.
Le informazioni nella sezione "Su questo libro" possono far riferimento a edizioni diverse di questo titolo.
- EditoreLAP LAMBERT Academic Publishing
- Data di pubblicazione2015
- ISBN 10 3659791431
- ISBN 13 9783659791437
- RilegaturaCopertina flessibile
- LinguaInglese
- Numero di pagine184
- Contatto del produttorenon disponibile
Compra nuovo
Visualizza questo articolo
EUR 52,90
EUR 9,70 per la spedizione da Germania a Italia
Destinazione, tempi e costiRisultati della ricerca per Design & Cost Estimation of Ethylene Production...
Immagini fornite dal venditore
Design & Cost Estimation of Ethylene Production Unit From Naphta
Editore:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659791431
ISBN 13: 9783659791437
Nuovo
Brossura
Da: moluna, Greven, Germania
Valutazione del venditore 5 su 5 stelle
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Shahi ArefAref Shahi: M.Sc in Chemical Engineering, Abadan Petroleum University of Technology,2014.B.Sc in Chemical Engineering,Babol Noshirvani University of Technology,2012.Three years, industry oriented Research with focus on pyro. Codice articolo 159145374
Quantità: Più di 20 disponibili
Foto dell'editore
Design Cost Estimation of Ethylene Production Unit From Naphta Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS
Print on DemandDa: PBShop.store US, Wood Dale, IL, U.S.A.
Valutazione del venditore 5 su 5 stelle
PAP. Condizione: New. New Book. Shipped from UK. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Codice articolo L0-9783659791437
Quantità: Più di 20 disponibili
Foto dell'editore
Design Cost Estimation of Ethylene Production Unit From Naphta Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS
Print on DemandDa: PBShop.store UK, Fairford, GLOS, Regno Unito
Valutazione del venditore 4 su 5 stelle
PAP. Condizione: New. New Book. Delivered from our UK warehouse in 4 to 14 business days. THIS BOOK IS PRINTED ON DEMAND. Established seller since 2000. Codice articolo L0-9783659791437
Quantità: Più di 20 disponibili
Foto dell'editore
Design & Cost Estimation of Ethylene Production Unit From Naphta: Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS
Editore:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659791431
ISBN 13: 9783659791437
Nuovo
Brossura
Da: Ria Christie Collections, Uxbridge, Regno Unito
Valutazione del venditore 5 su 5 stelle
Condizione: New. In. Codice articolo ria9783659791437_new
Quantità: Più di 20 disponibili
Foto dell'editore
Design & Cost Estimation of Ethylene Production Unit From Naphta: Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS
Editore:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659791431
ISBN 13: 9783659791437
Nuovo
Brossura
Da: California Books, Miami, FL, U.S.A.
Valutazione del venditore 5 su 5 stelle
Condizione: New. Codice articolo I-9783659791437
Quantità: Più di 20 disponibili
Immagini fornite dal venditore
Design & Cost Estimation of Ethylene Production Unit From Naphta
Editore:
LAP LAMBERT Academic Publishing Okt 2015, 2015
ISBN 10: 3659791431
ISBN 13: 9783659791437
Nuovo
Taschenbuch
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Ethylene is widely used in chemical industry, and its worldwide production(over 109 million tonnes in 2006) exceeds that of any other organic compound. Commercially ethylene is obtained by(1)thermal cracking of hydrocarbons such as ethane, propane, butane, naphtha, kerosene, gasoil, crude oil,etc,(2) auto thermic cracking (partial oxidation) of the above hydrocarbons,(3)recovery from refinery off-gas,(4) recovery from coke-oven gas, and(5) catalytic dehydration of ethyl alcohol or ethyl ether. The thermal cracking process is the most interesting process to produce ethylene commercially .At this project production of ethylene from naphtha is studied. Naphtha, an important feedstock for ethylene production, is a collective of liquid hydrocarbon intermediate oil refining products. It is a mixture of hydrocarbons in the boiling point range of 30-200ºC. it is fed to the naphtha cracking furnace. Then, the cracked gas is fed to gasoline fractionator, where it separates the quench oil as a bottom and the cracked gasoline and lighter components as the overhead products. Then, the overhead products are separated in different column. 184 pp. Englisch. Codice articolo 9783659791437
Quantità: 2 disponibili
Immagini fornite dal venditore
Design & Cost Estimation of Ethylene Production Unit From Naphta : Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS
Editore:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659791431
ISBN 13: 9783659791437
Nuovo
Taschenbuch
Da: AHA-BUCH GmbH, Einbeck, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Ethylene is widely used in chemical industry, and its worldwide production(over 109 million tonnes in 2006) exceeds that of any other organic compound. Commercially ethylene is obtained by(1)thermal cracking of hydrocarbons such as ethane, propane, butane, naphtha, kerosene, gasoil, crude oil,etc,(2) auto thermic cracking (partial oxidation) of the above hydrocarbons,(3)recovery from refinery off-gas,(4) recovery from coke-oven gas, and(5) catalytic dehydration of ethyl alcohol or ethyl ether. The thermal cracking process is the most interesting process to produce ethylene commercially .At this project production of ethylene from naphtha is studied. Naphtha, an important feedstock for ethylene production, is a collective of liquid hydrocarbon intermediate oil refining products. It is a mixture of hydrocarbons in the boiling point range of 30-200ºC. it is fed to the naphtha cracking furnace. Then, the cracked gas is fed to gasoline fractionator, where it separates the quench oil as a bottom and the cracked gasoline and lighter components as the overhead products. Then, the overhead products are separated in different column. Codice articolo 9783659791437
Quantità: 1 disponibili
Immagini fornite dal venditore
Design & Cost Estimation of Ethylene Production Unit From Naphta
Editore:
LAP LAMBERT Academic Publishing Okt 2015, 2015
ISBN 10: 3659791431
ISBN 13: 9783659791437
Nuovo
Taschenbuch
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. Neuware -Ethylene is widely used in chemical industry, and its worldwide production(over 109 million tonnes in 2006) exceeds that of any other organic compound. Commercially ethylene is obtained by(1)thermal cracking of hydrocarbons such as ethane, propane, butane, naphtha, kerosene, gasoil, crude oil,etc,(2) auto thermic cracking (partial oxidation) of the above hydrocarbons,(3)recovery from refinery off-gas,(4) recovery from coke-oven gas, and(5) catalytic dehydration of ethyl alcohol or ethyl ether. The thermal cracking process is the most interesting process to produce ethylene commercially .At this project production of ethylene from naphtha is studied. Naphtha, an important feedstock for ethylene production, is a collective of liquid hydrocarbon intermediate oil refining products. It is a mixture of hydrocarbons in the boiling point range of 30-200ºC. it is fed to the naphtha cracking furnace. Then, the cracked gas is fed to gasoline fractionator, where it separates the quench oil as a bottom and the cracked gasoline and lighter components as the overhead products. Then, the overhead products are separated in different column.Books on Demand GmbH, Überseering 33, 22297 Hamburg 184 pp. Englisch. Codice articolo 9783659791437
Quantità: 2 disponibili
Foto dell'editore
Design & Cost Estimation of Ethylene Production Unit From Naphta: Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS
Editore:
LAP LAMBERT Academic Publishing 2015-10-15, 2015
ISBN 10: 3659791431
ISBN 13: 9783659791437
Nuovo
Paperback
Da: Chiron Media, Wallingford, Regno Unito
Valutazione del venditore 5 su 5 stelle
Paperback. Condizione: New. Codice articolo 6666-IUK-9783659791437
Quantità: 10 disponibili
Foto dell'editore
Design & Cost Estimation of Ethylene Production Unit From Naphta: Naphtha cracking process is simulated with ASPEN HYSYS then design and cost estimation is done with ASPEN ICARUS
Editore:
LAP LAMBERT Academic Publishing, 2015
ISBN 10: 3659791431
ISBN 13: 9783659791437
Nuovo
Brossura
Da: Lucky's Textbooks, Dallas, TX, U.S.A.
Valutazione del venditore 5 su 5 stelle
Condizione: New. Codice articolo ABLIING23Mar3113020305314
Quantità: Più di 20 disponibili