Articoli correlati a Optimization of Machining System: By Application of...
Sinossi
An NC Program merely guides and controls a Machining process. It cannot respond and react to variations in machining conditions during the operation. This results in many unfavorable situations like greater lead times, tool damage, extreme caution in work handling etc. during machining. In order to overcome above mentioned problems, the concept of ADAPTIVE CONTROL MACHINING was introduced. The purpose of introducing this concept is to control and optimize the variable cutting parameters. The applications of ACM are not only limited to NC machining but such systems are designed to compensate for environment changes perceived, monitored, altered or reset according to the situation. In the present work, Adaptive Control principles are applied to TURNING and experiments are carried out on a LATHE.The specimens selected for this experiment are specially designed so that the required sources of variability are included. As FORCE IS DIRECTLY PROPORTIONAL TO FEED, process is kept under control.The results shows that successful implementaion of Adaptive control principles to TURNING is aptly justified.
Le informazioni nella sezione "Riassunto" possono far riferimento a edizioni diverse di questo titolo.
L'autore
B.Srinivasa Prasad received a Master?s in Production Engineering from SV University, Tirupati, India. He has more than nine years experience in teaching at UG and PG level. Presently, his Ph.D thesis is under review. At present working as an Assistant Professor in Mechanical Engg dept.,G.I.T, GITAM University, Visakhapatnam, India-530045.
Le informazioni nella sezione "Su questo libro" possono far riferimento a edizioni diverse di questo titolo.
Risultati della ricerca per Optimization of Machining System: By Application of...
Immagini fornite dal venditore
Optimization of Machining System
Editore:
LAP LAMBERT Academic Publishing Jun 2010, 2010
ISBN 10: 3838377605
ISBN 13: 9783838377605
Nuovo
Taschenbuch
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -An NC Program merely guides and controls a Machining process. It cannot respond and react to variations in machining conditions during the operation. This results in many unfavorable situations like greater lead times, tool damage, extreme caution in work handling etc. during machining. In order to overcome above mentioned problems, the concept of ADAPTIVE CONTROL MACHINING was introduced. The purpose of introducing this concept is to control and optimize the variable cutting parameters. The applications of ACM are not only limited to NC machining but such systems are designed to compensate for environment changes perceived, monitored, altered or reset according to the situation. In the present work, Adaptive Control principles are applied to TURNING and experiments are carried out on a LATHE.The specimens selected for this experiment are specially designed so that the required sources of variability are included. As FORCE IS DIRECTLY PROPORTIONAL TO FEED, process is kept under control.The results shows that successful implementaion of Adaptive control principles to TURNING is aptly justified. 72 pp. Englisch. Codice articolo 9783838377605
Compra nuovo
EUR 49,00
Spedizione EUR 23,00
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: 2 disponibili
Immagini fornite dal venditore
Optimization of Machining System : By Application of Adaptive Control Principles
Editore:
LAP LAMBERT Academic Publishing, 2010
ISBN 10: 3838377605
ISBN 13: 9783838377605
Nuovo
Taschenbuch
Da: AHA-BUCH GmbH, Einbeck, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - An NC Program merely guides and controls a Machining process. It cannot respond and react to variations in machining conditions during the operation. This results in many unfavorable situations like greater lead times, tool damage, extreme caution in work handling etc. during machining. In order to overcome above mentioned problems, the concept of ADAPTIVE CONTROL MACHINING was introduced. The purpose of introducing this concept is to control and optimize the variable cutting parameters. The applications of ACM are not only limited to NC machining but such systems are designed to compensate for environment changes perceived, monitored, altered or reset according to the situation. In the present work, Adaptive Control principles are applied to TURNING and experiments are carried out on a LATHE.The specimens selected for this experiment are specially designed so that the required sources of variability are included. As FORCE IS DIRECTLY PROPORTIONAL TO FEED, process is kept under control.The results shows that successful implementaion of Adaptive control principles to TURNING is aptly justified. Codice articolo 9783838377605
Compra nuovo
EUR 49,59
Spedizione EUR 35,00
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: 1 disponibili
Immagini fornite dal venditore
Optimization of Machining System
Editore:
LAP LAMBERT Academic Publishing, 2010
ISBN 10: 3838377605
ISBN 13: 9783838377605
Nuovo
Brossura
Da: moluna, Greven, Germania
Valutazione del venditore 5 su 5 stelle
Condizione: New. Codice articolo 5418047
Compra nuovo
EUR 41,05
Spedizione EUR 48,99
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: Più di 20 disponibili
Immagini fornite dal venditore
Optimization of Machining System
Editore:
LAP LAMBERT Academic Publishing Jun 2010, 2010
ISBN 10: 3838377605
ISBN 13: 9783838377605
Nuovo
Taschenbuch
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -An NC Program merely guides and controls a Machining process. It cannot respond and react to variations in machining conditions during the operation. This results in many unfavorable situations like greater lead times, tool damage, extreme caution in work handling etc. during machining. In order to overcome above mentioned problems, the concept of ADAPTIVE CONTROL MACHINING was introduced. The purpose of introducing this concept is to control and optimize the variable cutting parameters. The applications of ACM are not only limited to NC machining but such systems are designed to compensate for environment changes perceived, monitored, altered or reset according to the situation. In the present work, Adaptive Control principles are applied to TURNING and experiments are carried out on a LATHE.The specimens selected for this experiment are specially designed so that the required sources of variability are included. As FORCE IS DIRECTLY PROPORTIONAL TO FEED, process is kept under control.The results shows that successful implementaion of Adaptive control principles to TURNING is aptly justified.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 72 pp. Englisch. Codice articolo 9783838377605
Compra nuovo
EUR 49,00
Spedizione EUR 60,00
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: 1 disponibili
Immagini fornite dal venditore
Optimization of Machining System | By Application of Adaptive Control Principles
Editore:
LAP LAMBERT Academic Publishing, 2010
ISBN 10: 3838377605
ISBN 13: 9783838377605
Nuovo
Taschenbuch
Da: preigu, Osnabrück, Germania
Valutazione del venditore 5 su 5 stelle
Taschenbuch. Condizione: Neu. Optimization of Machining System | By Application of Adaptive Control Principles | Srinivasa Prasad Balla | Taschenbuch | 72 S. | Englisch | 2010 | LAP LAMBERT Academic Publishing | EAN 9783838377605 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu. Codice articolo 101028599
Compra nuovo
EUR 43,40
Spedizione EUR 70,00
Spedito da Germania a U.S.A.
Spedito da Germania a U.S.A.
Quantità: 5 disponibili
Foto dell'editore
Optimization of Machining System: By Application of Adaptive Control Principles
Editore:
LAP LAMBERT Academic Publishing, 2010
ISBN 10: 3838377605
ISBN 13: 9783838377605
Antico o usato
Paperback
Da: Mispah books, Redhill, SURRE, Regno Unito
Valutazione del venditore 4 su 5 stelle
Paperback. Condizione: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book. Codice articolo ERICA75838383776056
Compra usato
EUR 122,06
Spedizione EUR 29,33
Spedito da Regno Unito a U.S.A.
Spedito da Regno Unito a U.S.A.
Quantità: 1 disponibili