Articoli correlati a Plant Analysis Procedures

Plant Analysis Procedures ISBN 13: 9789048167173

Plant Analysis Procedures - Brossura

 
9789048167173: Plant Analysis Procedures

Sinossi

This manual is intended for the practising chemist who has to do a job in analysing plant material. Therefore, the present manual only contains ready-to-hand procedures without any comment. The procedures described are only for inorganic components, which frequently occur in the plant. Most procedures are designed to give a total content value of the element under consideration, regardless of the chemical structure in which it occurs in the plant.

We have chosen for a design in which all digestion procedures are described in one chapter, all extraction procedures in one chapter and all determination procedures in one chapter. As a consequence, one has to choose a suitable digestion method in combination with the intended determination technique; this has been indicated within each individual determination procedure.

For determination of the elements, mainly spectrometric techniques are used here. Depending on the kind of element and the expected concentration level, the following methods are applied: flame atomic emission spectrometry (flame AES), flame atomic absorption spectrometry (flame AAS), inductively coupled plasma optical emission spectrometry (ICP-OES), electrothermal atomisation (graphite furnace) atomic absorption spectrometry (ETA-AAS), inductively coupled plasma mass spectrometry (ICP-MS), spectrophotometry and segmented flow analysis (SFA). Besides, potentiometry (ion selective electrodes (ISE)) and coulometry will be encountered. In many cases, more than one method is described to determine a component. This provides a reference, as well as an alternative in case of instrumental or analytical problems.

Le informazioni nella sezione "Riassunto" possono far riferimento a edizioni diverse di questo titolo.

Contenuti

Preface.- 1. Introduction.- 1.1 Organisation Of This Manual. 1.2 Technical Remarks. 1.3 Sampling And Pretreatment. 2. Digestions.- 2.1 Digestion In Tubes With H2SO4 - Salicylic Acid - H2O2 And Selenium. For the determination of total Ca, K, Mg, Mn, N, N, Na, P and Zn. 2.2 Digestion In Flasks With H2SO4 - Salicylic Acid - H2O2. For the determination of total Ca, K, Mg, Mn, N, Na, P, and Zn. 2.3 Microwave Digestion With HNO3 - H2O2 - HF. For the determination of total Al, As, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, S, Sb, Sn, V and Zn. 2.4 Digestion With HNO3 - H2O2 - HF.- For the determination of total Al, As, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, S, Sb, Sn, V and Zn. 2.5 Digestion With HNO3.- For the determination of total S. 2.6 Digestion With HNO3 - HCLO4 - H2SO4.- For the determination of total Cd, Cu, Fe, Mn and Zn. 2.7 Digestion By Dry-Ashing Followed By Treatment With HF.-For the determination of total Al, As, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, S, Sb, Sn, V and Zn. 2.8 Digestion By Dry-Ashing In The Presence Of CAO. For the determination of total B. 3. Extractions.- 3.1 Extraction With Water. For the determination of Cl-, NO2-, NO3- and SO42- 3.2 Extraction With HF - HCL. For the determination of total B and Si. 4. Determinations.- 4.1 Determination Of Aluminium.- 4.1.A Determination Of Aluminium By Spectrophotometry. 4.1.B Determination Of Aluminium By ICP-OES. 4.1.C Determination Of Aluminium By ICP-MS. 4.2 Determination Of Arsenic.- 4.2.A Determination Of Arsenic By ICP-MS. 4.3 Determination Of Boron.- 4.3.A Determination Of Boron By Spectrophotometry. 4.3.B Determination Of Boron By ICP-OES. 4.4 Determination Of Calcium.- 4.4.A Determination Of Calcium By Flame AES. 4.4.B Determination Of Calcium By Flame AAS. 4.4.C Determination Of Calcium By ICP-OES. 4.5 Determination Of Cadmium.- 4.5.A Determination Of Cadmium By Flame AAS. 4.5.B Determination Of Cadmium By ICP-OES. 4.5.C Determination Of Cadmium By ETA-AAS. 4.5.D Determination Of Cadmium By ICP-MS. 4.6 Determination Of Chloride.- 4.6.A Determination Of Chloride By Coulometric Titration. 4.7 Determination Of Cobalt.- 4.7.A Determination Of Cobalt By ICP-OES. 4.7.B Determination Of Cobalt By ICP-MS. 4.8 Determination Of Chromium.- 4.8.A Determination Of Chromium By ICP-OES. 4.8.B Determination Of Chromium By ICP-MS. 4.9 Determination Of Copper.- 4.9.A Determination Of Copper By Flame AAS. 4.9.B Determination Of Copper By ICP-OES. 4.9.C Determination Of Copper By ETA-AAS. 4.9.D Determination Of Copper By ICP-MS. 4.10 Determination Of Iron.- 4.10.A Determination Of Iron By Flame AAS. 4.10.B Determination Of Iron By ICP-OES. 4.11 Determination Of Potassium.- 4.11.A Determination Of Potassium By Flame AES. 4.11.B Determination Of Potassium By ICP-OES. 4.12 Determination Of Magnesium.- 4.12.A Determination Of Magnesium By Flame AAS. 4.12.B Determination Of Magnesium By ICP-OES. 4.13 Determination Of Manganese.- 4.13.A Determination Of Manganese By Flame AAS. 4.13.B Determination Of Manganese By ICP-OES. 4.13.C Determination Of Manganese By ICP-MS. 4.14 Determination Of Nitrogen Fractions.- 4.14.A Determination Of Total Nitrogen By Spectrophotometry. 4.14.B Determination Of Total Nitrogen By SFA. 4.14.C Determination Of Nitrate (+ Nitrite) By SFA. 4.14.D Determination Of Nitrate-Nitrogen By ISE. 4.14.E Determination Of Nitrite By SFA. 4.15 Determination Of Sodium.- 4.15.A Determination Of Sodium By Flame AES. 4.15.B Determination Of Sodium By ICP-OES. 4.16 Determination Of Nickel.- 4.16.A Determination Of Nickel By Flame AAS. 4.16.B Determination Of Nickel By Flame AAS. 4.16.C Determination Of Nickel By ICP-MS. 4.17 Determination Of Phosphorus.- 4.17.A Determination Of Total Phosphorus By Spectrophotometry. 4.17.B Determination Of Total Phosphorus By SFA. 4.17.C Determination Of Total Phosphorus By ICP-OES. 4.18 Determination Of Lead.- 4.18.A Determination Of Lead By Flame AAS. 4.18.B Determination Of Lead By ICP-OES. 4.18.C Determination Of Lead By ETA-AAS. 4.18.D Determination Of Lead By ICP-MS. 4.19 Determination Of Sulphur Fractions.- 4.19.A Determination Of Total Sulphur By ICP-OES. 4.19.B Determination Of Sulphate By ICP-OES. 4.20 Determination Of Antimony.- 4.20.A Determination Of Antimony By ICP-MS. 4.21 Determination Of Silicon.- 4.21.A Determination Of Silicon By ICP-OES. 4.22 Determination Of Tin.- 4.22.A Determination Of Tin By ICP-MS. 4.23 Determination Of Vanadium.- 4.23.A Determination Of Vanadium By ICP-MS. 4.24 Determination Of Zinc.- 4.24.A Determination Of Zinc By Flame AAS. 4.24.B Determination Of Zinc By ICP-OES. 4.24.C Determination Of Zinc By ICP-MS.

Le informazioni nella sezione "Su questo libro" possono far riferimento a edizioni diverse di questo titolo.

EUR 9,70 per la spedizione da Germania a Italia

Destinazione, tempi e costi

Altre edizioni note dello stesso titolo

9781402027697: Plant Analysis: Procedures

Edizione in evidenza

ISBN 10:  1402027699 ISBN 13:  9781402027697
Casa editrice: Kluwer Academic Pub, 2005
Rilegato

Risultati della ricerca per Plant Analysis Procedures

Immagini fornite dal venditore

Temminghoff, Erwin E.J.M|Houba, Victor J.G.
Editore: Springer Netherlands, 2010
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo Brossura
Print on Demand

Da: moluna, Greven, Germania

Valutazione del venditore 5 su 5 stelle 5 stelle, Maggiori informazioni sulle valutazioni dei venditori

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. This manual is intended for the practising chemist who has to do a job in analysing plant material. Therefore, the present manual only contains ready-to-hand procedures without any comment. The procedures described are only for inorganic components, whic. Codice articolo 5820567

Contatta il venditore

Compra nuovo

EUR 92,27
Convertire valuta
Spese di spedizione: EUR 9,70
Da: Germania a: Italia
Destinazione, tempi e costi

Quantità: Più di 20 disponibili

Aggiungi al carrello

Foto dell'editore

Editore: Springer, 2010
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo Brossura

Da: Ria Christie Collections, Uxbridge, Regno Unito

Valutazione del venditore 5 su 5 stelle 5 stelle, Maggiori informazioni sulle valutazioni dei venditori

Condizione: New. In. Codice articolo ria9789048167173_new

Contatta il venditore

Compra nuovo

EUR 106,14
Convertire valuta
Spese di spedizione: EUR 10,39
Da: Regno Unito a: Italia
Destinazione, tempi e costi

Quantità: Più di 20 disponibili

Aggiungi al carrello

Immagini fornite dal venditore

Victor J. G. Houba
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo Taschenbuch
Print on Demand

Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, Germania

Valutazione del venditore 5 su 5 stelle 5 stelle, Maggiori informazioni sulle valutazioni dei venditori

Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This manual is intended for the practising chemist who has to do a job in analysing plant material. Therefore, the present manual only contains ready-to-hand procedures without any comment. The procedures described are only for inorganic components, which frequently occur in the plant. Most procedures are designed to give a total content value of the element under consideration, regardless of the chemical structure in which it occurs in the plant. We have chosen for a design in which all digestion procedures are described in one chapter, all extraction procedures in one chapter and all determination procedures in one chapter. As a consequence, one has to choose a suitable digestion method in combination with the intended determination technique; this has been indicated within each individual determination procedure.For determination of the elements, mainly spectrometric techniques are used here. Depending on the kind of element and the expected concentration level, the following methods are applied: flame atomic emission spectrometry (flame AES), flame atomic absorption spectrometry (flame AAS), inductively coupled plasma optical emission spectrometry (ICP-OES), electrothermal atomisation (graphite furnace) atomic absorption spectrometry (ETA-AAS), inductively coupled plasma mass spectrometry (ICP-MS), spectrophotometry and segmented flow analysis (SFA). Besides, potentiometry (ion selective electrodes (ISE)) and coulometry will be encountered. In many cases, more than one method is described to determine a component. This provides a reference, as well as an alternative in case of instrumental or analytical problems. 192 pp. Englisch. Codice articolo 9789048167173

Contatta il venditore

Compra nuovo

EUR 106,99
Convertire valuta
Spese di spedizione: EUR 11,00
Da: Germania a: Italia
Destinazione, tempi e costi

Quantità: 2 disponibili

Aggiungi al carrello

Immagini fornite dal venditore

Victor J. G. Houba
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo Taschenbuch
Print on Demand

Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germania

Valutazione del venditore 5 su 5 stelle 5 stelle, Maggiori informazioni sulle valutazioni dei venditori

Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This manual is intended for the practising chemist who has to do a job in analysing plant material. Therefore, the present manual only contains ready-to-hand procedures without any comment. The procedures described are only for inorganic components, which frequently occur in the plant. Most procedures are designed to give a total content value of the element under consideration, regardless of the chemical structure in which it occurs in the plant. We have chosen for a design in which all digestion procedures are described in one chapter, all extraction procedures in one chapter and all determination procedures in one chapter. As a consequence, one has to choose a suitable digestion method in combination with the intended determination technique; this has been indicated within each individual determination procedure. For determination of the elements, mainly spectrometric techniques are used here. Depending on the kind of element and the expected concentration level, the following methods are applied: flame atomic emission spectrometry (flame AES), flame atomic absorption spectrometry (flame AAS), inductively coupled plasma optical emission spectrometry (ICP-OES), electrothermal atomisation (graphite furnace) atomic absorption spectrometry (ETA-AAS), inductively coupled plasma mass spectrometry (ICP-MS), spectrophotometry and segmented flow analysis (SFA). Besides, potentiometry (ion selective electrodes (ISE)) and coulometry will be encountered. In many cases, more than one method is described to determine a component. This provides a reference, as well as an alternative in case of instrumental or analytical problems.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 192 pp. Englisch. Codice articolo 9789048167173

Contatta il venditore

Compra nuovo

EUR 106,99
Convertire valuta
Spese di spedizione: EUR 15,00
Da: Germania a: Italia
Destinazione, tempi e costi

Quantità: 1 disponibili

Aggiungi al carrello

Immagini fornite dal venditore

Victor J. G. Houba
Editore: Springer Netherlands, 2010
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo Taschenbuch

Da: AHA-BUCH GmbH, Einbeck, Germania

Valutazione del venditore 5 su 5 stelle 5 stelle, Maggiori informazioni sulle valutazioni dei venditori

Taschenbuch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - This manual is intended for the practising chemist who has to do a job in analysing plant material. Therefore, the present manual only contains ready-to-hand procedures without any comment. The procedures described are only for inorganic components, which frequently occur in the plant. Most procedures are designed to give a total content value of the element under consideration, regardless of the chemical structure in which it occurs in the plant. We have chosen for a design in which all digestion procedures are described in one chapter, all extraction procedures in one chapter and all determination procedures in one chapter. As a consequence, one has to choose a suitable digestion method in combination with the intended determination technique; this has been indicated within each individual determination procedure.For determination of the elements, mainly spectrometric techniques are used here. Depending on the kind of element and the expected concentration level, the following methods are applied: flame atomic emission spectrometry (flame AES), flame atomic absorption spectrometry (flame AAS), inductively coupled plasma optical emission spectrometry (ICP-OES), electrothermal atomisation (graphite furnace) atomic absorption spectrometry (ETA-AAS), inductively coupled plasma mass spectrometry (ICP-MS), spectrophotometry and segmented flow analysis (SFA). Besides, potentiometry (ion selective electrodes (ISE)) and coulometry will be encountered. In many cases, more than one method is described to determine a component. This provides a reference, as well as an alternative in case of instrumental or analytical problems. Codice articolo 9789048167173

Contatta il venditore

Compra nuovo

EUR 109,94
Convertire valuta
Spese di spedizione: EUR 14,99
Da: Germania a: Italia
Destinazione, tempi e costi

Quantità: 1 disponibili

Aggiungi al carrello

Foto dell'editore

Temminghoff, Erwin E. J. M.
Editore: Springer 2010-12, 2010
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo PF

Da: Chiron Media, Wallingford, Regno Unito

Valutazione del venditore 4 su 5 stelle 4 stelle, Maggiori informazioni sulle valutazioni dei venditori

PF. Condizione: New. Codice articolo 6666-IUK-9789048167173

Contatta il venditore

Compra nuovo

EUR 106,61
Convertire valuta
Spese di spedizione: EUR 23,11
Da: Regno Unito a: Italia
Destinazione, tempi e costi

Quantità: 10 disponibili

Aggiungi al carrello

Foto dell'editore

Editore: Springer, 2010
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo Brossura

Da: California Books, Miami, FL, U.S.A.

Valutazione del venditore 5 su 5 stelle 5 stelle, Maggiori informazioni sulle valutazioni dei venditori

Condizione: New. Codice articolo I-9789048167173

Contatta il venditore

Compra nuovo

EUR 126,96
Convertire valuta
Spese di spedizione: EUR 7,70
Da: U.S.A. a: Italia
Destinazione, tempi e costi

Quantità: Più di 20 disponibili

Aggiungi al carrello

Foto dell'editore

Editore: Springer, 2010
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo Brossura

Da: Books Puddle, New York, NY, U.S.A.

Valutazione del venditore 4 su 5 stelle 4 stelle, Maggiori informazioni sulle valutazioni dei venditori

Condizione: New. pp. 192. Codice articolo 262571918

Contatta il venditore

Compra nuovo

EUR 130,64
Convertire valuta
Spese di spedizione: EUR 7,70
Da: U.S.A. a: Italia
Destinazione, tempi e costi

Quantità: 4 disponibili

Aggiungi al carrello

Foto dell'editore

Editore: Springer, 2010
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo Brossura
Print on Demand

Da: Majestic Books, Hounslow, Regno Unito

Valutazione del venditore 5 su 5 stelle 5 stelle, Maggiori informazioni sulle valutazioni dei venditori

Condizione: New. Print on Demand pp. 192 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam. Codice articolo 5275985

Contatta il venditore

Compra nuovo

EUR 136,18
Convertire valuta
Spese di spedizione: EUR 10,23
Da: Regno Unito a: Italia
Destinazione, tempi e costi

Quantità: 4 disponibili

Aggiungi al carrello

Foto dell'editore

Houba Victor J. G. Temminghoff Erwin E. J. M.
Editore: Springer, 2010
ISBN 10: 9048167175 ISBN 13: 9789048167173
Nuovo Brossura
Print on Demand

Da: Biblios, Frankfurt am main, HESSE, Germania

Valutazione del venditore 5 su 5 stelle 5 stelle, Maggiori informazioni sulle valutazioni dei venditori

Condizione: New. PRINT ON DEMAND pp. 192. Codice articolo 182571908

Contatta il venditore

Compra nuovo

EUR 140,04
Convertire valuta
Spese di spedizione: EUR 7,95
Da: Germania a: Italia
Destinazione, tempi e costi

Quantità: 4 disponibili

Aggiungi al carrello

Vedi altre 2 copie di questo libro

Vedi tutti i risultati per questo libro