Arrif iffa mohd (16 risultati)
Lingua: Inglese
Editore: Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 46,22
EUR 6,80 spedizioneSpedito da Italia a U.S.A.Quantità: 5 disponibili
Condizione: new.
High-Flexion Knee Prosthesis: Design and Finite Element Analysis (FEA)
Arrif, Iffa Mohd (Author)/ Shuib, Solehuddin (Author)/ Ghani, Amir Radzi Ab (Author)
Lingua: Inglese
Editore: Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: Revaluation Books, Exeter, Regno UnitoRevaluation Books
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 54,37
EUR 11,73 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 2 disponibili
Paperback. Condizione: Brand New. 125 pages. 9.25x6.10x9.25 inches. In Stock.
Lingua: Inglese
Editore: Springer Nature Switzerland AG, Cham, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: Grand Eagle Retail, Bensenville, IL, U.S.A.Grand Eagle Retail
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 68,01
Spedizione gratuitaSpedito in U.S.A.Quantità: 1 disponibili
Paperback. Condizione: new. Paperback. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model structures using CAD software. The design modific…ations process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). Shipping may be from multiple locations in the US or from the UK, depending on stock availability.
Lingua: Inglese
Editore: Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: Brook Bookstore, Milano, MI, ItaliaBrook Bookstore
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 41,49
EUR 27,99 spedizioneSpedito da Italia a U.S.A.Quantità: 5 disponibili
Condizione: new.
High-Flexion Knee Prosthesis: Design and Finite Element Analysis (FEA)
Arrif, Iffa Mohd (Author)/ Shuib, Solehuddin (Author)/ Ghani, Amir Radzi Ab (Author)
Lingua: Inglese
Editore: Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: Revaluation Books, Exeter, Regno UnitoRevaluation Books
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 77,83
EUR 11,73 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 2 disponibili
Paperback. Condizione: Brand New. 125 pages. 9.25x6.10x9.25 inches. In Stock.
Lingua: Inglese
Editore: Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: Books Puddle, New York, NY, U.S.A.Books Puddle
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 89,53
EUR 3,50 spedizioneSpedito in U.S.A.Quantità: 4 disponibili
Condizione: New.
Lingua: Inglese
Editore: Springer Nature Switzerland AG, Cham, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: CitiRetail, Stevenage, Regno UnitoCitiRetail
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 56,18
EUR 43,41 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 1 disponibili
Paperback. Condizione: new. Paperback. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model structures using CAD software. The design modific…ations process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). Shipping may be from our UK warehouse or from our Australian or US warehouses, depending on stock availability.
Lingua: Inglese
Editore: Springer, Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: AHA-BUCH GmbH, Einbeck, GermaniaAHA-BUCH GmbH
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 58,39
EUR 61,12 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model struc…tures using CAD software. The design modifications process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation.
Lingua: Inglese
Editore: Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 50,40
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. High-Flexion Knee Prosthesis | Design and Finite Element Analysis (FEA) | Iffa Mohd Arrif (u. a.) | Taschenbuch | SpringerBriefs in Applied Sciences and Technology | xxvii | Englisch | 2025 | Springer | EAN 9789819698776 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 6…9121 Heidelberg, juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Lingua: Inglese
Editore: Springer Nature Switzerland AG, Cham, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
Da: AussieBookSeller, Truganina, VIC, AustraliaAussieBookSeller
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 98,71
EUR 32,45 spedizioneSpedito da Australia a U.S.A.Quantità: 1 disponibili
Paperback. Condizione: new. Paperback. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D model structures using CAD software. The design modific…ations process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). Shipping may be from our Sydney, NSW warehouse or from our UK or US warehouse, depending on stock availability.
Lingua: Inglese
Editore: Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
- Print on Demand
Da: Basi6 International, Irving, TX, U.S.A.Basi6 International
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 61,75
Spedizione gratuitaSpedito in U.S.A.Quantità: 10 disponibili
Condizione: Brand New. New. US edition. Print on demand title. Delivery takes 20-25 days. Excellent Customer Service.
Lingua: Inglese
Editore: Springer, Berlin, Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
- Print on Demand
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermaniaBuchWeltWeit Ludwig Meier e.K.
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 53,49
EUR 23,00 spedizioneSpedito da Germania a U.S.A.Quantità: 2 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to creat…e 3D model structures using CAD software. The design modifications process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation. 94 pp. Englisch.
Lingua: Inglese
Editore: Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
- Print on Demand
Da: Majestic Books, Hounslow, Regno UnitoMajestic Books
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 90,40
EUR 7,63 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 4 disponibili
Condizione: New. Print on Demand.
Lingua: Inglese
Editore: Springer Verlag GmbH, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
- Print on Demand
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 48,37
EUR 48,99 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt.
Lingua: Inglese
Editore: Springer, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
- Print on Demand
Da: Biblios, frankfurt am main, HESSE, GermaniaBiblios
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 90,24
EUR 9,95 spedizioneSpedito da Germania a U.S.A.Quantità: 4 disponibili
Condizione: New. PRINT ON DEMAND.
Lingua: Inglese
Editore: Springer, Springer Okt 2025, 2025
Serie: SpringerBriefs in Applied Sciences and Technology, Libro 428 di 472. Libro 428 di 472 - SpringerBriefs in Applied Sciences and Technology
- Brossura
- Print on Demand
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germaniabuchversandmimpf2000
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 53,49
EUR 60,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book highlights the design, modifications, and analysis of knee prosthesis or total knee replacement (TKR) components. CT scan images of a knee joint are extracted by 3D Gens. The model of knee joint is then developed to create 3D… model structures using CAD software. The design modifications' process focuses on the tibial insert component to increase the range of motion. All the design modifications were analyzed using FEA software. The book describes additive manufacturing (AM) in order to fabricate the TKR components using 3D printing techniques such as fused deposition modeling (FDM) and selective laser sintering (SLS). It uses FDM to print the tibial insert with polyamide material. Meanwhile, SLS prints the femoral and tibial components with titanium alloy material. TKR jigs were fabricated by advanced manufacturing process using stainless steel, and compression testing evaluated the deformation when the force is applied vertically to the femoral component. Compression testing results are not discussed as they were used to validate the results of FEA only. The outcomes of FEA were compared with the compression results in terms of deformation.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 124 pp. Englisch.
