Mostafa adel (38 risultati)

Paperback. Condizione: Brand New. 318 pages. Persian Farsi language. 9.21x6.14x0.80 inches. In Stock.

Paperback. Condizione: Brand New. 128 pages. 8.66x5.91x0.29 inches. In Stock.

Taschenbuch. Condizione: Neu. Effect of Machining Parameters on Surfaces Roughness of CNC Milling | using Taguchi method | Mostafa Adel Abdullah (u. a.) | Taschenbuch | 60 S. | Englisch | 2019 | LAP LAMBERT Academic Publishing | EAN 9786139994212 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.…

Taschenbuch. Condizione: Neu. Study The Effect Of Machining Parameter For EDM Process | Mostafa Adel (u. a.) | Taschenbuch | 64 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9786139946051 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu. …

Condizione: New.

Taschenbuch. Condizione: Neu. The Wear Measurement Process of End Milling Tool | Using Computer Vision System | Mostafa Adel (u. a.) | Taschenbuch | 128 S. | Englisch | 2016 | LAP LAMBERT Academic Publishing | EAN 9783659979750 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.…

Condizione: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining.…

Condizione: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | The objective of the present work is the investigation of milling process parameters which includes depth of cut, tool diameter, spindle speed, and feed rate resulting in optimal values of the surface roughness during machining of 2024-T4 - AL alloy. The machining operation implemented on XK7124 CNC milling machine. The effects of the selected parameters on the chosen characteristics have been accomplished using Taguchi¿s parameter design approach; also ANOVA had been used to evaluate the contribution of each parameter on the process outputs.…

Condizione: Hervorragend. Zustand: Hervorragend | Sprache: Englisch | Produktart: Bücher | The objective of the present work is the investigation of milling process parameters which includes depth of cut, tool diameter, spindle speed, and feed rate resulting in optimal values of the surface roughness during machining of 2024-T4 - AL alloy. The machining operation implemented on XK7124 CNC milling machine. The effects of the selected parameters on the chosen characteristics have been accomplished using Taguchi¿s parameter design approach; also ANOVA had been used to evaluate the contribution of each parameter on the process outputs.…

Paperback. Condizione: Brand New. 180 pages. 8.66x5.91x0.41 inches. In Stock.

Condizione: New.

Paperback. Condizione: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Taschenbuch. Condizione: Neu. Effet des paramètres d'usinage sur la rugosité des surfaces en fraisage CNC | en utilisant la méthode Taguchi. DE | Mostafa Adel Abdullah (u. a.) | Taschenbuch | Großformatiges Paperback. Klappenbroschur | Französisch | Editions Notre Savoir | EAN 9786205789735 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Condizione: New.

Taschenbuch. Condizione: Neu. Vliqnie parametrow obrabotki na sherohowatost' powerhnostej pri frezerowanii s ChPU | s ispol'zowaniem metoda [.] | Mostafa Adel' Abdulla (u. a.) | Taschenbuch | Großformatiges Paperback. Klappenbroschur | Russisch | Sciencia Scripts | EAN 9786205789766 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu.…

Taschenbuch. Condizione: Neu. Effetto dei parametri di lavorazione sulla rugosità delle superfici nella fresatura CNC | utilizzando il metodo Taguchi. DE | Mostafa Adel Abdullah (u. a.) | Taschenbuch | Großformatiges Paperback. Klappenbroschur | Italienisch | Edizioni Sapienza | EAN 9786205789742 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.…

Taschenbuch. Condizione: Neu. Einfluss der Bearbeitungsparameter auf die Oberflächenrauheit des CNC-Fräsens | mit der [.] | Mostafa Adel Abdullah (u. a.) | Taschenbuch | Großformatiges Paperback. Klappenbroschur | Deutsch | Verlag Unser Wissen | EAN 9786205789711 | Verantwortliche Person für die EU: SIA OmniScriptum Publishing, Brivibas Gatve 197, 1039 RIGA, LETTLAND, customerservice[at]vdm-vsg[dot]de | Anbieter: preigu. …

Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining. 64 pp. Englisch.…

Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The objective of the present work is the investigation of milling process parameters which includes depth of cut, tool diameter, spindle speed, and feed rate resulting in optimal values of the surface roughness during machining of 2024-T4 - AL alloy. The machining operation implemented on XK7124 CNC milling machine. The effects of the selected parameters on the chosen characteristics have been accomplished using Taguchi's parameter design approach; also ANOVA had been used to evaluate the contribution of each parameter on the process outputs. 60 pp. Englisch.…

Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -This book uses a vision system to determine the flank wear in end milling tool and comparison with microscope use four flute HSS coated with TIN using stainless steel (316L) metal as a workpiece. The design of a vision system is to measure the cutting tool flank wear width based on charge coupled device (CCD) camera an image process algorithm on the using of canny edge detection, filter, rotating and morphological operations on the captured images. Maximum and minimum percentage error in the flank wear width was (8.250% and 0.645 %) respectively and the mean absolute percentage error was (2.888%). 128 pp. Englisch.…

Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining. …

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Adel MostafaMostafa Adel Abdullah born in Baghdad on February 26,1987 Education: Bsc and Msc in Production Engineering from Universality Of Technology, Baghdad-Iraq in 2009 and 2015 respectivelyElectrical discharge machining (ED.…

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Adel Abdullah MostafaMostafa Adel Abdullah born in Baghdad, on February 26,1987. Education: BSc and MSc in production Engineering from University of technology, Baghdad in 2009 and 2015 respectively.The objective of the present .…

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Adel MostafaMostafa adel abdullah born in Baghdad, on February 26, 1987. Education: BSc and MSc in Production Engineering from University of Technology, Baghdad in 2009 and 2015 respectively.This book uses a vision system to dete.…

Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The objective of the present work is the investigation of milling process parameters which includes depth of cut, tool diameter, spindle speed, and feed rate resulting in optimal values of the surface roughness during machining of 2024-T4 - AL alloy. The machining operation implemented on XK7124 CNC milling machine. The effects of the selected parameters on the chosen characteristics have been accomplished using Taguchi's parameter design approach; also ANOVA had been used to evaluate the contribution of each parameter on the process outputs.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 60 pp. Englisch.…

Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Electrical discharge machining (EDM) is a non-traditional process that uses the electrical spark discharge to machine electrically conducting materials for geometrically complex shapes or hard materials, which are difficult to machine using a traditional approach. The objective of this work is to study the effect of different electrodes material on the responses of electrical discharge machining. The electrodes material were copper and brass with diameter (15mm) and (40 mm) length used to machine AISI H13 steel at different currents (20, 30 and 40A), Pulse on time (50 ,100 and 150 µs), Gap (1,3 and 6mm) and constant workpiece thickness (4 mm) with is diesel oil. Taguchi method is used to determine the best designe for Nine samples were machined by using electrical discharge machine with voltage (140 V) remains constant during machining.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 64 pp. Englisch. …

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: El-Sonbati AdelCurrent Specialization:Environmental and Industrial Chemistry Research.Synthesis and Characterization of Supramolecular PolymersSupramolecular Polymer Complexes Conducting Polymer Conducting Polymer Complexes Organ.…

Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -This book uses a vision system to determine the flank wear in end milling tool and comparison with microscope use four flute HSS coated with TIN using stainless steel (316L) metal as a workpiece. The design of a vision system is to measure the cutting tool flank wear width based on charge coupled device (CCD) camera an image process algorithm on the using of canny edge detection, filter, rotating and morphological operations on the captured images. Maximum and minimum percentage error in the flank wear width was (8.250% and 0.645 %) respectively and the mean absolute percentage error was (2.888%).VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 128 pp. Englisch.…

Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - This book uses a vision system to determine the flank wear in end milling tool and comparison with microscope use four flute HSS coated with TIN using stainless steel (316L) metal as a workpiece. The design of a vision system is to measure the cutting tool flank wear width based on charge coupled device (CCD) camera an image process algorithm on the using of canny edge detection, filter, rotating and morphological operations on the captured images. Maximum and minimum percentage error in the flank wear width was (8.250% and 0.645 %) respectively and the mean absolute percentage error was (2.888%).…

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: El-Sonbati AdelCurrent Specialization: Synthesis and Characterization of Supramolecular Polymer Supramolecular Polymer Complexes Conducting Polymer Conducting Polymer Complexes Organic Compounds/Aliphatic compounds ComplexesP.…