Hutchings aaron (25 risultati)

Hardcover. Condizione: New. 1st Edition. New hardcover in shrinkwrap. 612 pages.

Vol. 216. xviii, 588 p. Softcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. NATO ASI Series, Series E: Applied Sciences, Vol. 216. Sprache: Englisch. …

Condizione: New.

Condizione: As New. Unread book in perfect condition.

Paperback. Condizione: New.

Condizione: New. In English.

Condizione: New. pp. 612.

Taschenbuch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the major problems facing engineers for many years, and so the extension of X-ray methods to the use of neutrons represents a major advance. The technique utilizes the unique penetrating power of the neutron into most engineering materials, combined with the sensitivity of diffraction, to measure the separation of lattice planes within grains of polycrystalline engineering materials, thus providing an internal strain gauge. The strain is then converted to stress using calibrated elastic constants. It was just over ten years ago that the initial neutron diffraction measurements of residual stress were carried out, and during the ensuing decade measurements have commenced at most steady state reactors and pulsed sources around the world. So swift has been the development of the field that, in addition to fundamental scientific studies, commercial measurements have been made on industrial components for several years now. The use of neutrons is ideally suited to the determination of triaxial macrostress tensors, macrostress gradients, and microstresses in composites and multiphase alloys as well as deformed, plastically anisotropic metals and alloys. To date, it has been used to investigate welded and heat-treated industrial components, to characterize composites, to study the response of material under applied loads, to calibrate more portable methods such as ultrasonics, and to verify computer modelling calculations of residual and applied stress.…

Condizione: As New. Unread book in perfect condition.

Condizione: New. In English.

Condizione: New.

Condizione: As New. Unread book in perfect condition.

Condizione: New.

Gebunden. Condizione: New. The relevance of residual stresses in engineering components is being increasingly appreciated by modern engineers concerned with design and performance. The non-destructive evaluation of such stresses has provided a challenge which has been addressed by th.

Hardcover. Condizione: Brand New. 612 pages. 6.14x1.31x9.21 inches. In Stock.

Condizione: Gut. Zustand: Gut | Seiten: 612 | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.

Buch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - The relevance of residual stresses in engineering components is being increasingly appreciated by modern engineers concerned with design and performance. The non-destructive evaluation of such stresses has provided a challenge which has been addressed by the use of X-ray diffraction to characterize near-surface stresses. The extension of diffraction stress measurements to include neutron diffraction represents a major advance. Use of the penetrating power of neutrons is ideally suited to the determination of macrostress variation through thick components and of microstresses in composites and multiphase alloys. This collection of papers on the subject is the first of its kind and represents a definitive summary of the field. With contributions by most of the world's experts, it gives a comprehensive treatment of the theory, practice and problems in the measurement of residual stresses using neutrons, with references to virtually all work currently in print. It provides state-of-the-art information about the uses and limitations of the method, with numerous examples. It is appropriate both for those currently using X-ray methods, and for engineers and scientists considering the use of neutrons for industrial or research problems involving residual stress characterization in metallic, ceramic or composite systems.…

Condizione: new. Questo è un articolo print on demand.

Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the major problems facing engineers for many years, and so the extension of X-ray methods to the use of neutrons represents a major advance. The technique utilizes the unique penetrating power of the neutron into most engineering materials, combined with the sensitivity of diffraction, to measure the separation of lattice planes within grains of polycrystalline engineering materials, thus providing an internal strain gauge. The strain is then converted to stress using calibrated elastic constants. It was just over ten years ago that the initial neutron diffraction measurements of residual stress were carried out, and during the ensuing decade measurements have commenced at most steady state reactors and pulsed sources around the world. So swift has been the development of the field that, in addition to fundamental scientific studies, commercial measurements have been made on industrial components for several years now. The use of neutrons is ideally suited to the determination of triaxial macrostress tensors, macrostress gradients, and microstresses in composites and multiphase alloys as well as deformed, plastically anisotropic metals and alloys. To date, it has been used to investigate welded and heat-treated industrial components, to characterize composites, to study the response of material under applied loads, to calibrate more portable methods such as ultrasonics, and to verify computer modelling calculations of residual and applied stress. 612 pp. Englisch.…

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Proceedings of the NATO Advanced Research Workshop, Oxford, U.K., 18-22 March, 1991 The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the maj. …

Condizione: New. Print on Demand pp. 612 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

Condizione: New. PRINT ON DEMAND pp. 612.

Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The accurate, absolute, and non-destructive measurement of residual stress fields within metallic, ceramic, and composite engineering components has been one of the major problems facing engineers for many years, and so the extension of X-ray methods to the use of neutrons represents a major advance. The technique utilizes the unique penetrating power of the neutron into most engineering materials, combined with the sensitivity of diffraction, to measure the separation of lattice planes within grains of polycrystalline engineering materials, thus providing an internal strain gauge. The strain is then converted to stress using calibrated elastic constants. It was just over ten years ago that the initial neutron diffraction measurements of residual stress were carried out, and during the ensuing decade measurements have commenced at most steady state reactors and pulsed sources around the world. So swift has been the development of the field that, in addition to fundamental scientific studies, commercial measurements have been made on industrial components for several years now. The use of neutrons is ideally suited to the determination of triaxial macrostress tensors, macrostress gradients, and microstresses in composites and multiphase alloys as well as deformed, plastically anisotropic metals and alloys. To date, it has been used to investigate welded and heat-treated industrial components, to characterize composites, to study the response of material under applied loads, to calibrate more portable methods such as ultrasonics, and to verify computer modelling calculations of residual and applied stress.Springer-Verlag KG, Sachsenplatz 4-6, 1201 Wien 612 pp. Englisch.…

Hardback. Condizione: New. This item is printed on demand. New copy - Usually dispatched within 5-9 working days.

Buch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The relevance of residual stresses in engineering components is being increasingly appreciated by modern engineers concerned with design and performance. The non-destructive evaluation of such stresses has provided a challenge which has been addressed by the use of X-ray diffraction to characterize near-surface stresses. The extension of diffraction stress measurements to include neutron diffraction represents a major advance. Use of the penetrating power of neutrons is ideally suited to the determination of macrostress variation through thick components and of microstresses in composites and multiphase alloys. This collection of papers on the subject is the first of its kind and represents a definitive summary of the field. With contributions by most of the world's experts, it gives a comprehensive treatment of the theory, practice and problems in the measurement of residual stresses using neutrons, with references to virtually all work currently in print. It provides state-of-the-art information about the uses and limitations of the method, with numerous examples. It is appropriate both for those currently using X-ray methods, and for engineers and scientists considering the use of neutrons for industrial or research problems involving residual stress characterization in metallic, ceramic or composite systems. 612 pp. Englisch.…