Oday abdullah (31 risultati)
- Brossura
Da: Books Puddle, New York, NY, U.S.A.Books Puddle
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 64,91
EUR 3,50 spedizioneSpedito in U.S.A.Quantità: 4 disponibili
Condizione: New.
Optimization Of Design Parameters For The Rigid Drive Disc Of Clutch: Using Finite Element Method
Abdullah, Oday; Schlattmann, Josef; Pireci, Emir; Abdullah, Oday; Schlattmann, Josef; Pireci, Emir
- Brossura
Da: Revaluation Books, Exeter, Regno UnitoRevaluation Books
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 73,78
EUR 11,73 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 1 disponibili
Paperback. Condizione: Brand New. 80 pages. 8.66x5.91x0.19 inches. In Stock.
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 36,35
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. Optimization Of Design Parameters For The Rigid Drive Disc Of Clutch | Using Finite Element Method | Oday Abdullah (u. a.) | Taschenbuch | 80 S. | Englisch | 2018 | LAP LAMBERT Academic Publishing | EAN 9783659471803 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19,… 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
- Brossura
Da: Books Puddle, New York, NY, U.S.A.Books Puddle
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 111,84
EUR 3,50 spedizioneSpedito in U.S.A.Quantità: 4 disponibili
Condizione: New.
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 47,90
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. Transient Thermoelastic Analysis of Friction Clutch Using FEM | Analysis of the temperature field and contact pressure | Oday Ibraheem Abdullah (u. a.) | Taschenbuch | 120 S. | Englisch | 2013 | LAP LAMBERT Academic Publishing | EAN 9783659502590 | Verantwortliche Person für die EU: preigu GmbH & Co…. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 61,05
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. Investigation of Blades Failure for an Axial Fan | Stresses and Vibration Analysis | Oday Ibraheem Abdullah | Taschenbuch | 160 S. | Englisch | 2013 | LAP LAMBERT Academic Publishing | EAN 9783659463211 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrü…ck, mail[at]preigu[dot]de | Anbieter: preigu.
- Brossura
Da: Revaluation Books, Exeter, Regno UnitoRevaluation Books
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 126,52
EUR 11,73 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 1 disponibili
Paperback. Condizione: Brand New. 160 pages. 8.66x5.91x0.37 inches. In Stock.
- Brossura
Da: Mispah books, Redhill, SURRE, Regno UnitoMispah books
Contatta il venditoreVenditore con 4 stelleCondizione: Usato - Come nuovo
EUR 132,94
EUR 29,33 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 1 disponibili
Paperback. Condizione: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Brossura
Da: Mispah books, Redhill, SURRE, Regno UnitoMispah books
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 149,86
EUR 29,33 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 1 disponibili
paperback. Condizione: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Brossura
Da: Buchpark, Trebbin, GermaniaBuchpark
Contatta il venditoreVenditore con 5 stelleCondizione: Usato - Ottimo
EUR 83,04
EUR 105,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Condizione: Sehr gut. Zustand: Sehr gut | Sprache: Englisch | Produktart: Bücher | Keine Beschreibung verfügbar.
- Brossura
Da: Mispah books, Redhill, SURRE, Regno UnitoMispah books
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 215,12
EUR 29,33 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 1 disponibili
paperback. Condizione: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 43,95
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. Verschleiß-und Oberflächentemperatur Untersuchungen | von Reibmaterialien für trockene Kupplungen | Oday Ibraheem Abdullah (u. a.) | Taschenbuch | 104 S. | Deutsch | 2015 | AV Akademikerverlag | EAN 9783639495607 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 490…78 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
- Brossura
- Print on Demand
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermaniaBuchWeltWeit Ludwig Meier e.K.
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 39,90
EUR 23,00 spedizioneSpedito da Germania a U.S.A.Quantità: 2 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The new direction of development of the automotive vehicle ride comfort and driving smoothness is associated with the advancement of the machine parts design, e.g., torsional dampers on friction clutch are considered as essential p…arts to maintain engine torque peaks as well as operational irregularities and reduce them in a way that is consistent with the comfort and robustness purposes. In this book, a numerical technique is used to model proposed designs of disc drive for friction clutch. The shape and material optimizations of the proposed models were carried out to improve the dynamic characteristics of the system and hence the absorption of shocks that occur during clutch engagement. In this work, the attention is paid to the numerical solution using finite element method to estimate the stresses and deformations for steady-state of the proposed models and hence investigation of the vibration characteristics of disc drives for clutch. 80 pp. Englisch.
- Brossura
- Print on Demand
Da: Majestic Books, Hounslow, Regno UnitoMajestic Books
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 63,98
EUR 7,63 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 4 disponibili
Condizione: New. Print on Demand.
- Brossura
- Print on Demand
Da: Biblios, frankfurt am main, HESSE, GermaniaBiblios
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 65,02
EUR 9,95 spedizioneSpedito da Germania a U.S.A.Quantità: 4 disponibili
Condizione: New. PRINT ON DEMAND.
- Brossura
- Print on Demand
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermaniaBuchWeltWeit Ludwig Meier e.K.
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 54,90
EUR 23,00 spedizioneSpedito da Germania a U.S.A.Quantità: 2 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -The high thermal stresses generated at the contacting surfaces of single-clutch system (pressure plate, clutch disc and flywheel) due to the frictional heating during the slipping, This thermal stresses are consider one of the main… reasons of clutch failure for contact surfaces. A finite element technique has been used to study the transient thermoelastic phenomena of a dry clutch system (single and multi-discs systems). The effect of sliding speed, thickness of friction material and the boundary conditions on contact pressure distribution, temperature field and heat flux generated along the frictional surfaces is investigated. Analysis has been completed using two dimensional axisymmetric model to simulate the clutch system. 120 pp. Englisch.
- Brossura
- Print on Demand
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 34,25
EUR 48,99 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Abdullah OdayOday Ibraheem Abdullah has obtained his M. Sc degree in mechanical Eng./University of Baghdad in 2003. He is one of the faculty members in the Dept. of Energy Eng./College of Eng./Universi…ty of Baghdad since 2002. Now he.
- Brossura
- Print on Demand
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 41,71
EUR 48,99 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Jobair Hussein KhalafHussein Khalaf Jobair has obtained his M. Sc degree in Mechanical Engineering Department/ College of Engineering / University of Baghdad since 2009. He is a member of teaching staf…f in the Department of Energy En.
Transient Thermoelastic Analysis of Friction Clutch Using FEM
Oday Ibraheem Abdullah|Mumtaz Jamil Akhtar|Josef Schlattmann
- Brossura
- Print on Demand
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 45,45
EUR 48,99 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Abdullah Oday IbraheemOday Ibraheem Abdullah has obtained his M. Sc degree in Mechanical Eng./University of Baghdad in 2003. He is one of the faculty members in the Dept. of Energy Eng./College of Eng.…/University of Baghdad since 200.
- Brossura
- Print on Demand
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germaniabuchversandmimpf2000
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 39,90
EUR 60,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The new direction of development of the automotive vehicle ride comfort and driving smoothness is associated with the advancement of the machine parts design, e.g., torsional dampers on friction clutch are considered as essential parts… to maintain engine torque peaks as well as operational irregularities and reduce them in a way that is consistent with the comfort and robustness purposes. In this book, a numerical technique is used to model proposed designs of disc drive for friction clutch. The shape and material optimizations of the proposed models were carried out to improve the dynamic characteristics of the system and hence the absorption of shocks that occur during clutch engagement. In this work, the attention is paid to the numerical solution using finite element method to estimate the stresses and deformations for steady-state of the proposed models and hence investigation of the vibration characteristics of disc drives for clutch.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 80 pp. Englisch.
- Brossura
- Print on Demand
Da: AHA-BUCH GmbH, Einbeck, GermaniaAHA-BUCH GmbH
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 39,90
EUR 60,69 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - The new direction of development of the automotive vehicle ride comfort and driving smoothness is associated with the advancement of the machine parts design, e.g., torsional dampers on friction clutch are considered as essential parts…to maintain engine torque peaks as well as operational irregularities and reduce them in a way that is consistent with the comfort and robustness purposes. In this book, a numerical technique is used to model proposed designs of disc drive for friction clutch. The shape and material optimizations of the proposed models were carried out to improve the dynamic characteristics of the system and hence the absorption of shocks that occur during clutch engagement. In this work, the attention is paid to the numerical solution using finite element method to estimate the stresses and deformations for steady-state of the proposed models and hence investigation of the vibration characteristics of disc drives for clutch.
- Brossura
- Print on Demand
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 58,12
EUR 48,99 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Abdullah Oday IbraheemOday Ibraheem Abdullah has obtained his M. Sc degree inmechanical Eng./University of Baghdad in 2003. He is one of the faculty members in the Dept. of Energy Eng./College of Eng./…University of Baghdad since 2002.
- Brossura
- Print on Demand
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germaniabuchversandmimpf2000
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 54,90
EUR 60,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -The high thermal stresses generated at the contacting surfaces of single-clutch system (pressure plate, clutch disc and flywheel) due to the frictional heating during the slipping, This thermal stresses are consider one of the main rea…sons of clutch failure for contact surfaces. A finite element technique has been used to study the transient thermoelastic phenomena of a dry clutch system (single and multi-discs systems). The effect of sliding speed, thickness of friction material and the boundary conditions on contact pressure distribution, temperature field and heat flux generated along the frictional surfaces is investigated. Analysis has been completed using two dimensional axisymmetric model to simulate the clutch system.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 120 pp. Englisch.
- Brossura
- Print on Demand
Da: Majestic Books, Hounslow, Regno UnitoMajestic Books
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 114,38
EUR 7,63 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 4 disponibili
Condizione: New. Print on Demand.
- Brossura
- Print on Demand
Da: Biblios, frankfurt am main, HESSE, GermaniaBiblios
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 115,77
EUR 9,95 spedizioneSpedito da Germania a U.S.A.Quantità: 4 disponibili
Condizione: New. PRINT ON DEMAND.
- Brossura
- Print on Demand
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germaniabuchversandmimpf2000
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 71,90
EUR 60,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Axial flow fan blades are the important parts in ventilation and therefore an accurate estimation of the stresses, deformations and vibration characteristics are required in the design of the blade to avoid failure and obtain an optimu…m weight and cost. This work presents the numerical solution to estimate the stresses and deformations for steady-state and dynamic responses. Also, the analytical solution and experimental test carried out to investigate the vibration characteristics of the investigated fan blades. All formulation and computations are coded in FORTRAN-77. The dynamic response results were estimated by ANSYS/ 5.4 package. The numerical, analytical and experimental results are compared with the results in the previously published literature and MSC/ NASTRAN package, and the present results show good agreement.Many parameters such as speed of rotation, thickness, skew angle, pre-twist angle, disc radius, aspect ratios, type of alloy and the shape of cross-sectional area for the practical fan blade are investigated in this work. These parameters affect the design of fan blades and also different types of fan blades are studied.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 160 pp. Englisch.
- Brossura
- Print on Demand
Da: AHA-BUCH GmbH, Einbeck, GermaniaAHA-BUCH GmbH
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 72,76
EUR 61,28 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Axial flow fan blades are the important parts in ventilation and therefore an accurate estimation of the stresses, deformations and vibration characteristics are required in the design of the blade to avoid failure and obtain an optimum… weight and cost. This work presents the numerical solution to estimate the stresses and deformations for steady-state and dynamic responses. Also, the analytical solution and experimental test carried out to investigate the vibration characteristics of the investigated fan blades. All formulation and computations are coded in FORTRAN-77. The dynamic response results were estimated by ANSYS/ 5.4 package. The numerical, analytical and experimental results are compared with the results in the previously published literature and MSC/ NASTRAN package, and the present results show good agreement.Many parameters such as speed of rotation, thickness, skew angle, pre-twist angle, disc radius, aspect ratios, type of alloy and the shape of cross-sectional area for the practical fan blade are investigated in this work. These parameters affect the design of fan blades and also different types of fan blades are studied.
- Brossura
- Print on Demand
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermaniaBuchWeltWeit Ludwig Meier e.K.
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 43,95
EUR 23,00 spedizioneSpedito da Germania a U.S.A.Quantità: 2 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Aufbauend auf einem Wirtz Buehler Phoenix Beta Schleif- und Poliergerät wurde ein Prüfstand zur Untersuchung des Reib- und Verschleißverhalten von Kupplungsmaterialien integriert. Die Reibmaterialien können nach der Pin-on-Disc Met…hode untersucht werden. Das Schleif- und Poliergerät dient dabei als Grundlage zur Befestigung der zusätzlichen Konstruktion und es stellt die Rotationseinheit für den Prüfstand dar. Die integrierte Konstruktion übernimmt dabei die Aufgabe den Prüfpin zu halten und ihn auch zu führen. Als weitere Aufgabe soll durch die zusätzliche Konstruktion eine Belastung, durch Gewichtsscheiben, auf den Prüfpin und das Reibmaterial gegeben werden können. Dazu ist diese in die Baugruppen: Stab, Traverse und Klemmen unterteilt worden. Bei der konkreten Ausgestaltung ist zunächst das Schleif- und Poliergerät vermessen und in ein CAD-Modell überführt worden. Mit diesem Modell konnte die geometrische Richtigkeit der erstellten Konstruktion überprüft werden. Aus Norm- und Konstruktionsbauteilen ist der eigentliche Prüfstand erstellt worden. Nach Ermittlung der notwendigen und gewünschten Eigenschaften in der Anforderungsliste der Prüfstand ebenfalls als CAD-Modell entstanden. Nach dem erfolgreichen Zusammenbau ist der Prüfstand in Betrieb genommen worden und steht somit für Testzwecke zur Verfügung. 104 pp. Deutsch.
- Brossura
- Print on Demand
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 43,95
EUR 48,99 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Abdullah Oday IbraheemOday Abdullah hat seinen M. Sc Abschluss in Maschinenbau/Univ. von Bagdad im Jahr 2003 erhalten. Er ist einer der Mitarbeiter am Institut fuer Energietechnik/College of Eng./ Univ…. Bagdad seit 2002. Seit 10.2010 .
- Brossura
- Print on Demand
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germaniabuchversandmimpf2000
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 43,95
EUR 60,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Aufbauend auf einem Wirtz Buehler Phoenix Beta Schleif- und Poliergerät wurde ein Prüfstand zur Untersuchung des Reib- und Verschleißverhalten von Kupplungsmaterialien integriert. Die Reibmaterialien können nach der Pin-on-Disc Methode… untersucht werden. Das Schleif- und Poliergerät dient dabei als Grundlage zur Befestigung der zusätzlichen Konstruktion und es stellt die Rotationseinheit für den Prüfstand dar. Die integrierte Konstruktion übernimmt dabei die Aufgabe den Prüfpin zu halten und ihn auch zu führen. Als weitere Aufgabe soll durch die zusätzliche Konstruktion eine Belastung, durch Gewichtsscheiben, auf den Prüfpin und das Reibmaterial gegeben werden können. Dazu ist diese in die Baugruppen: Stab, Traverse und Klemmen unterteilt worden. Bei der konkreten Ausgestaltung ist zunächst das Schleif- und Poliergerät vermessen und in ein CAD-Modell überführt worden. Mit diesem Modell konnte die geometrische Richtigkeit der erstellten Konstruktion überprüft werden. Aus Norm- und Konstruktionsbauteilen ist der eigentliche Prüfstand erstellt worden. Nach Ermittlung der notwendigen und gewünschten Eigenschaften in der Anforderungsliste der Prüfstand ebenfalls als CAD-Modell entstanden. Nach dem erfolgreichen Zusammenbau ist der Prüfstand in Betrieb genommen worden und steht somit für Testzwecke zur Verfügung.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 104 pp. Deutsch.
