Orshansky (33 risultati)

Soft cover. Condizione: Near Fine. First paperback edition. 359pp., ix. First published in 1965; this copy, stated: "First Free Press paperback edition 1968" with NAP. Preface by Gunnar Myrdal. Index, pp. 357-359. Glossy wrappers with gray and red front cover, title and editor name lettering in white on upper gray 2/3 front cover, illustration of urban tenement buildings in black detail superimposed over red background. Spine toned (all black lettering sharp and distinct, fully readable); white rear cover toned lightly around perimeters; superficial, thin use crease down left (spine) edge front cover (NOT cracked); thin line of intermittent rubbing wear down cover edges at fore-edge: describes much worse than it is, but there you have it. Tight binding, essentially sharp corners, no previous owner names. Clean text. Solid copy, text block looks unused, Unread, despite superficial peccadilloes. David Brooks Op Ed piece from 2004, "Good News About Poverty", and Letters to NYT editor in reply laid in (NO acid stains on pages).…

Hardcover. Condizione: Very Good. No Jacket. May have limited writing in cover pages. Pages are unmarked. ~ ThriftBooks: Read More, Spend Less.

Condizione: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

Condizione: Brand New. New. US edition. Expediting shipping for all USA and Europe orders excluding PO Box. Excellent Customer Service.

Condizione: New. Brand New Original US Edition. Customer service! Satisfaction Guaranteed.

Condizione: New. pp. 328.

Condizione: New. pp. 328 52:B&W 6.14 x 9.21in or 234 x 156mm (Royal 8vo) Case Laminate on White w/Gloss Lam.

Condizione: New. pp. 328.

Condizione: New. This is a Brand-new US Edition. This Item may be shipped from US or any other country as we have multiple locations worldwide.

hardcover. Condizione: New. In shrink wrap. Looks like an interesting title.

Condizione: New. In English.

Condizione: New. In English.

Condizione: New. pp. 332.

Paperback. Condizione: Brand New. 328 pages. 9.25x6.10x0.75 inches. In Stock.

Hardcover. Condizione: Brand New. 1st edition. 310 pages. 9.25x6.25x0.75 inches. In Stock.

Paperback. Condizione: Like New. LIKE NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Condizione: New. Brand New! Fast Delivery This is an International Edition and ship within 24-48 hours. Deliver by FedEx and Dhl, & Aramex, UPS, & USPS and we do accept APO and PO BOX Addresses. Order can be delivered worldwide within 6-10 days and we do have flat rate for up to 2LB. Extra shipping charges will be requested if the Book weight is more than 5 LB. This Item May be shipped from India, United states & United Kingdom. Depending on your location and availability.…

LeatherBound. Condizione: New. BOOKS ARE EXEMPT FROM IMPORT DUTIES AND TARIFFS; NO EXTRA CHARGES APPLY. Leather Binding on Spine and Corners with Golden leaf printing on spine. Bound in genuine leather with Satin ribbon page markers and Spine with raised gilt bands. A perfect gift for your loved ones. Reprinted from 1976 edition. NO changes have been made to the original text. This is NOT a retyped or an ocr'd reprint. Illustrations, Index, if any, are included in black and white. Each page is checked manually before printing. As this print on demand book is reprinted from a very old book, there could be some missing or flawed pages, but we always try to make the book as complete as possible. Fold-outs, if any, are not part of the book. If the original book was published in multiple volumes then this reprint is of only one volume, not the whole set and contains approximately 24 pages. IF YOU WISH TO ORDER PARTICULAR VOLUME OR ALL THE VOLUMES YOU CAN CONTACT US. Resized as per current standards. Sewing binding for longer life, where the book block is actually sewn (smythe sewn/section sewn) with thread before binding which results in a more durable type of binding. Language: English.…

LeatherBound. Condizione: New. BOOKS ARE EXEMPT FROM IMPORT DUTIES AND TARIFFS; NO EXTRA CHARGES APPLY. Leatherbound edition. Condition: New. Leather Binding on Spine and Corners with Golden leaf printing on spine. Bound in genuine leather with Satin ribbon page markers and Spine with raised gilt bands. Pages: 96. A perfect gift for your loved ones. Reprinted from 1956 edition. NO changes have been made to the original text. This is NOT a retyped or an ocr'd reprint. Illustrations, Index, if any, are included in black and white. Each page is checked manually before printing. As this print on demand book is reprinted from a very old book, there could be some missing or flawed pages, but we always try to make the book as complete as possible. Fold-outs, if any, are not part of the book. If the original book was published in multiple volumes then this reprint is of only one volume, not the whole set. IF YOU WISH TO ORDER PARTICULAR VOLUME OR ALL THE VOLUMES YOU CAN CONTACT US. Resized as per current standards. Sewing binding for longer life, where the book block is actually sewn (smythe sewn/section sewn) with thread before binding which results in a more durable type of binding. Language: English Pages: 96.…

Leatherbound. Condizione: NEW. BOOKS ARE EXEMPT FROM IMPORT DUTIES AND TARIFFS; NO EXTRA CHARGES APPLY. Leatherbound edition. Condition: New. Leather Binding on Spine and Corners with Golden leaf printing on spine. Bound in genuine leather with Satin ribbon page markers and Spine with raised gilt bands. Pages: 96. A perfect gift for your loved ones. Reprinted from 1956 edition. NO changes have been made to the original text. This is NOT a retyped or an ocr'd reprint. Illustrations, Index, if any, are included in black and white. Each page is checked manually before printing. As this print on demand book is reprinted from a very old book, there could be some missing or flawed pages, but we always try to make the book as complete as possible. Fold-outs, if any, are not part of the book. If the original book was published in multiple volumes then this reprint is of only one volume, not the whole set. IF YOU WISH TO ORDER PARTICULAR VOLUME OR ALL THE VOLUMES YOU CAN CONTACT US. Resized as per current standards. Sewing binding for longer life, where the book block is actually sewn (smythe sewn/section sewn) with thread before binding which results in a more durable type of binding. Volume 113(1954) Language: English Pages: 96 Volume 113(1954).…

LeatherBound. Condizione: New. BOOKS ARE EXEMPT FROM IMPORT DUTIES AND TARIFFS; NO EXTRA CHARGES APPLY. Leatherbound edition. Condition: New. Leather Binding on Spine and Corners with Golden leaf printing on spine. Bound in genuine leather with Satin ribbon page markers and Spine with raised gilt bands. Pages: 372. A perfect gift for your loved ones. Reprinted from 1977 edition. NO changes have been made to the original text. This is NOT a retyped or an ocr'd reprint. Illustrations, Index, if any, are included in black and white. Each page is checked manually before printing. As this print on demand book is reprinted from a very old book, there could be some missing or flawed pages, but we always try to make the book as complete as possible. Fold-outs, if any, are not part of the book. If the original book was published in multiple volumes then this reprint is of only one volume, not the whole set. IF YOU WISH TO ORDER PARTICULAR VOLUME OR ALL THE VOLUMES YOU CAN CONTACT US. Resized as per current standards. Sewing binding for longer life, where the book block is actually sewn (smythe sewn/section sewn) with thread before binding which results in a more durable type of binding. Language: English Pages: 372.…

Condizione: new. Questo è un articolo print on demand.

Buch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Design for Manufacturability and Statistical Design: A Constructive Approach provides a thorough treatment of the causes of variability, methods for statistical data characterization, and techniques for modeling, analysis, and optimization of integrated circuits to improve yield. The objective of the constructive approach developed in this book is to formulate a consistent set of methods and principles necessary for rigorous statistical design and design for manufacturability from device physics to large-scale circuit optimization. The segments of the book are devoted, respectively, to understanding the causes of variability; design of test structures for variability characterization; statistically rigorous data analysis;techniques of design for manufacturability in lithography and in chemical mechanical polishing;statistical simulation, analysis, and optimization techniques for improving parametric yield.Design for Manufacturability and Statistical Design: A Constructive Approach presents an overview of the methods that need to be masteredfor state-of-the-art design for manufacturability and statistical design methodologies. It is animportant reference for practitioners and students in the field of computer-aided design of integrated circuits. 328 pp. Englisch.…

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Unified Treatment of Data Collection, Modeling, and Statistical CADCovers From Fabrication to Design to CADDeals With the Extraction of Fab Information into distrubutions for analysisCircuit Structures and Techniques to Reduce On-Chi.…

Gebunden. Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Unified Treatment of Data Collection, Modeling, and Statistical CADCovers From Fabrication to Design to CADDeals With the Extraction of Fab Information into distrubutions for analysisCircuit Structures and Techniques to Reduce On-Chi.…

Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Design for Manufacturability and Statistical Design: A Comprehensive Approach presents a comprehensive overview of methods that need to be mastered in understanding state-of-the-art design for manufacturability and statistical design methodologies. Broadly, design for manufacturability is a set of techniques that attempt to fix the systematic sources of variability, such as those due to photolithography and CMP. Statistical design, on the other hand, deals with the random sources of variability. Both paradigms operate within a common framework, and their joint comprehensive treatment is one of the objectives of this book and an important differentation. Design for Manufacturability and Statistical Design: A Constructive Approach provides a thorough treatment of the causes of variability, methods for statistical data characterization, and techniques for modeling, analysis, and optimization of integrated circuits to improve yield. The objective of the constructive approach developed in this book is to formulate a consistent set of methods and principles necessary for rigorous statistical design and design for manufacturability from device physics to large-scale circuit optimization. The segments of the book are devoted, respectively, to understanding the causes of variability; design of test structures for variability characterization; statistically rigorous data analysis;techniques of design for manufacturability in lithography and in chemical mechanical polishing;statistical simulation, analysis, and optimization techniques for improving parametric yield.Design for Manufacturability and Statistical Design: A Constructive Approach presents an overview of the methods that need to be mastered for state-of-the-art design for manufacturability and statistical design methodologies. It is an important reference for practitioners and students in the field of computer-aided design of integrated circuits. 332 pp. Englisch.…

Condizione: New. Print on Demand pp. 332 49:B&W 6.14 x 9.21 in or 234 x 156 mm (Royal 8vo) Perfect Bound on White w/Gloss Lam.

Buch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Design for Manufacturability and Statistical Design: A Constructive Approach provides a thorough treatment of the causes of variability, methods for statistical data characterization, and techniques for modeling, analysis, and optimization of integrated circuits to improve yield. The objective of the constructive approach developed in this book is to formulate a consistent set of methods and principles necessary for rigorous statistical design and design for manufacturability from device physics to large-scale circuit optimization. The segments of the book are devoted, respectively, tounderstanding the causes of variability;design of test structures for variability characterization;statistically rigorous data analysis;techniques of design for manufacturability in lithography and in chemical mechanical polishing;statistical simulation, analysis, and optimization techniques for improving parametric yield.Design for Manufacturability and Statistical Design: A Constructive Approach presents an overview of the methods that need to be mastered for state-of-the-art design for manufacturability and statistical design methodologies. It is an important reference for practitioners and students in the field of computer-aided design of integrated circuits.Springer-Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 328 pp. Englisch. …

Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Design for Manufacturability and Statistical Design: A Constructive Approach provides a thorough treatment of the causes of variability, methods for statistical data characterization, and techniques for modeling, analysis, and optimization of integrated circuits to improve yield. The objective of the constructive approach developed in this book is to formulate a consistent set of methods and principles necessary for rigorous statistical design and design for manufacturability from device physics to large-scale circuit optimization. The segments of the book are devoted, respectively, tounderstanding the causes of variability;design of test structures for variability characterization;statistically rigorous data analysis;techniques of design for manufacturability in lithography and in chemical mechanical polishing;statistical simulation, analysis, and optimization techniques for improving parametric yield.Design for Manufacturability and Statistical Design: A Constructive Approach presents an overview of the methods that need to be mastered for state-of-the-art design for manufacturability and statistical design methodologies. It is an important reference for practitioners and students in the field of computer-aided design of integrated circuits.Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg 332 pp. Englisch.…

Condizione: New. PRINT ON DEMAND pp. 332.