Shyha islam (55 risultati)
Lingua: Inglese
Editore: Cham, Springer., 2021
- Rilegato
Da: Universitätsbuchhandlung Herta Hold GmbH, Berlin, GermaniaUniversitätsbuchhandlung Herta Hold GmbH
Contatta il venditoreVenditore con 4 stelleCondizione: Usato
EUR 22,00
EUR 30,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
VI, 552 p. Hardcover. Versand aus Deutschland / We dispatch from Germany via Air Mail. Einband bestoßen, daher Mängelexemplar gestempelt, sonst sehr guter Zustand. Imperfect copy due to slightly bumped cover, apart from this in very good condition. Stamped. Engineering materials. Sprache: Englisch.
Altre immaginiEditore: Birmingham, 2010
- Brossura
- Prima edizione
Da: Curtle Mead Books, Cowes, Isle of Wight, IOW, Regno UnitoCurtle Mead Books
Contatta il venditoreVenditore con 5 stelleMembro dell’associazione: PBFA
Condizione: Usato - Molto buono
EUR 35,96
EUR 19,78 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 1 disponibili
Aggiungi al carrelloOversized paperback. Condizione: Very good. First Edition. This is the printed copy of Professor Shyha's PhD thesis. It is a bound copy with illustrations and graphs etc. included. There are appendices and an extensive reference section. 231pp The book is clean and there are no obvious highlighted words or added comments. It is…a heavy book and may cost more to send abroad. The price reflects that this book is not our more usual genre.
Lingua: Inglese
Editore: Springer, 2021
- Rilegato
Da: Buchpark, Trebbin, GermaniaBuchpark
Contatta il venditoreVenditore con 5 stelleCondizione: Usato
EUR 21,63
EUR 105,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Condizione: Hervorragend. Zustand: Hervorragend | Seiten: 560 | Sprache: Englisch | Produktart: Bücher | This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. I…t presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations. This book serves as a useful reference for manufacturing engineers, productionsupervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.
Lingua: Inglese
Editore: Springer, 2022
- Brossura
Da: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contatta il venditoreVenditore con 5 stelleCondizione: Usato - Come nuovo
EUR 142,70
EUR 2,28 spedizioneSpedito in U.S.A.Quantità: Più di 20 disponibili
Condizione: As New. Unread book in perfect condition.
Lingua: Inglese
Editore: Springer, 2022
- Brossura
Da: Ria Christie Collections, Uxbridge, Regno UnitoRia Christie Collections
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 140,68
EUR 13,94 spedizioneSpedito da Regno Unito a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. In.
Lingua: Inglese
Editore: Springer, 2022
- Brossura
Da: GreatBookPricesUK, Woodford Green, Regno UnitoGreatBookPricesUK
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 138,79
EUR 17,46 spedizioneSpedito da Regno Unito a U.S.A.Quantità: Più di 20 disponibili
Condizione: New.
Lingua: Inglese
Editore: Springer, 2022
- Brossura
Da: GreatBookPrices, Columbia, MD, U.S.A.GreatBookPrices
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 156,90
EUR 2,28 spedizioneSpedito in U.S.A.Quantità: Più di 20 disponibili
Condizione: New.
Lingua: Inglese
Editore: Springer, 2022
- Brossura
Da: GreatBookPricesUK, Woodford Green, Regno UnitoGreatBookPricesUK
Contatta il venditoreVenditore con 5 stelleCondizione: Usato - Come nuovo
EUR 149,72
EUR 17,46 spedizioneSpedito da Regno Unito a U.S.A.Quantità: Più di 20 disponibili
Condizione: As New. Unread book in perfect condition.
Lingua: Inglese
Editore: Springer, 2022
- Brossura
Da: Books Puddle, New York, NY, U.S.A.Books Puddle
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 172,80
EUR 3,44 spedizioneSpedito in U.S.A.Quantità: 4 disponibili
Condizione: New. 1st ed. 2021 edition NO-PA16APR2015-KAP.
Altre immaginiLingua: Inglese
Editore: Springer, 2022
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 113,20
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. Advances in Machining of Composite Materials | Conventional and Non-conventional Processes | Islam Shyha (u. a.) | Taschenbuch | Engineering Materials | vi | Englisch | 2022 | Springer | EAN 9783030714406 | Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, 69121 Heidelberg,… juergen[dot]hartmann[at]springer[dot]com | Anbieter: preigu.
Lingua: Inglese
Editore: Springer International Publishing, 2022
- Brossura
Da: AHA-BUCH GmbH, Einbeck, GermaniaAHA-BUCH GmbH
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 128,39
EUR 64,19 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-th…e-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations.This book serves as a useful reference for manufacturing engineers, productionsupervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.
Lingua: Inglese
Editore: Springer, 2021
- Rilegato
Da: Ria Christie Collections, Uxbridge, Regno UnitoRia Christie Collections
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 189,78
EUR 13,94 spedizioneSpedito da Regno Unito a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. In.
Lingua: Inglese
Editore: Springer, 2022
- Brossura
Da: Buchpark, Trebbin, GermaniaBuchpark
Contatta il venditoreVenditore con 5 stelleCondizione: Usato
EUR 107,68
EUR 105,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Condizione: Hervorragend. Zustand: Hervorragend | Seiten: 560 | Sprache: Englisch | Produktart: Bücher | This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. I…t presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations. This book serves as a useful reference for manufacturing engineers, productionsupervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.
Lingua: Inglese
Editore: Springer, 2021
- Rilegato
Da: Books Puddle, New York, NY, U.S.A.Books Puddle
Contatta il venditoreVenditore con 4 stelleCondizione: Nuovo
EUR 236,62
EUR 3,44 spedizioneSpedito in U.S.A.Quantità: 4 disponibili
Condizione: New.
Lingua: Inglese
Editore: Springer International Publishing, 2021
- Rilegato
Da: AHA-BUCH GmbH, Einbeck, GermaniaAHA-BUCH GmbH
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 181,89
EUR 64,99 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Buch. Condizione: Neu. Druck auf Anfrage Neuware - Printed after ordering - This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art a…cademic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations.This book serves as a useful reference for manufacturing engineers, productionsupervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.
- Brossura
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 63,28
EUR 45,00 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New.
Lingua: Inglese
Editore: Springer, 2021
- Rilegato
Da: Revaluation Books, Exeter, Regno UnitoRevaluation Books
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 279,45
EUR 14,55 spedizioneSpedito da Regno Unito a U.S.A.Quantità: 2 disponibili
Hardcover. Condizione: Brand New. 558 pages. 9.25x6.10x1.19 inches. In Stock.
- Brossura
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 63,28
EUR 45,00 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New.
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 69,55
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. Perçage des composites plastiques renforcés de fibres de carbone | Islam Shyha | Taschenbuch | Französisch | 2022 | Editions Notre Savoir | EAN 9786205164150 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
- Brossura
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 63,28
EUR 45,00 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New.
- Brossura
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 63,28
EUR 45,00 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New.
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 69,55
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. Perfuração de Compósitos Plásticos Reforçados com Fibra de Carbono | Islam Shyha | Taschenbuch | Portugiesisch | 2022 | Edições Nosso Conhecimento | EAN 9786205164181 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter…: preigu.
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 69,55
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. Foratura di compositi plastici rinforzati con fibra di carbonio | Islam Shyha | Taschenbuch | Italienisch | 2022 | Edizioni Sapienza | EAN 9786205164174 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.
- Brossura
Da: preigu, Osnabrück, Germaniapreigu
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 82,90
EUR 70,00 spedizioneSpedito da Germania a U.S.A.Quantità: 5 disponibili
Taschenbuch. Condizione: Neu. Bohren von kohlenstofffaserverstärkten Kunststoffverbundwerkstoffen | Islam Shyha | Taschenbuch | 260 S. | Deutsch | 2022 | Verlag Unser Wissen | EAN 9786205164143 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.
- Brossura
- Print on Demand
Da: BuchWeltWeit Ludwig Meier e.K., Bergisch Gladbach, GermaniaBuchWeltWeit Ludwig Meier e.K.
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 82,90
EUR 23,00 spedizioneSpedito da Germania a U.S.A.Quantità: 2 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Following an extensive literature survey focusing on the machinability of carbon fibre reinforced plastics (CFRP), three main phases of experimental work were undertaken to evaluate the drilling of CFRP and associated stack materia…ls. Phase 1 and 2 involved small diameter holes (1.5 mm) in thin CFRP laminates (3 mm thick) while Phase 3 addressed the feasibility of one-shot drilling (6.35 mm diameter holes) in multilayer workpiece stacks comprising titanium, CFRP and aluminium. Machinability was assessed in terms of tool life/wear, force/torque, hole size and geometrical accuracy, workpiece surface integrity and chip morphology. Initial trials (Phase 1A) were performed to investigate the effect of peel ply layers (~100 mim thick nylon sheet attached on both sides of the laminate to assist the bleeding of volatiles and air during curing as well as preventing surface contamination) on hole entry and exit quality, as current industrial practice involves removal of the protective sheet prior to drilling. 260 pp. Englisch.
Lingua: Inglese
Editore: Springer, 2022
- Brossura
- Print on Demand
Da: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 102,25
EUR 8,00 spedizioneSpedito da Italia a U.S.A.Quantità: Più di 20 disponibili
Condizione: new. Questo è un articolo print on demand.
- Brossura
- Print on Demand
Da: moluna, Greven, Germaniamoluna
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 66,32
EUR 48,99 spedizioneSpedito da Germania a U.S.A.Quantità: Più di 20 disponibili
Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Shyha IslamDr. Shyha has over 14 years of experience in teaching and research at higher education. His main research fields include machinability/surface integrity analysis of advanced workpiece materi…als, conventional and non-conven.
- Brossura
- Print on Demand
Da: buchversandmimpf2000, Emtmannsberg, BAYE, Germaniabuchversandmimpf2000
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 82,90
EUR 60,00 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Following an extensive literature survey focusing on the machinability of carbon fibre reinforced plastics (CFRP), three main phases of experimental work were undertaken to evaluate the drilling of CFRP and associated stack materials.…Phase 1 and 2 involved small diameter holes (1.5 mm) in thin CFRP laminates (3 mm thick) while Phase 3 addressed the feasibility of one-shot drilling (6.35 mm diameter holes) in multilayer workpiece stacks comprising titanium, CFRP and aluminium. Machinability was assessed in terms of tool life/wear, force/torque, hole size and geometrical accuracy, workpiece surface integrity and chip morphology. Initial trials (Phase 1A) were performed to investigate the effect of peel ply layers (~100 ¿m thick nylon sheet attached on both sides of the laminate to assist the bleeding of volatiles and air during curing as well as preventing surface contamination) on hole entry and exit quality, as current industrial practice involves removal of the protective sheet prior to drilling.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 260 pp. Englisch.
- Brossura
- Print on Demand
Da: AHA-BUCH GmbH, Einbeck, GermaniaAHA-BUCH GmbH
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 82,90
EUR 62,03 spedizioneSpedito da Germania a U.S.A.Quantità: 1 disponibili
Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Following an extensive literature survey focusing on the machinability of carbon fibre reinforced plastics (CFRP), three main phases of experimental work were undertaken to evaluate the drilling of CFRP and associated stack materials. P…hase 1 and 2 involved small diameter holes (1.5 mm) in thin CFRP laminates (3 mm thick) while Phase 3 addressed the feasibility of one-shot drilling (6.35 mm diameter holes) in multilayer workpiece stacks comprising titanium, CFRP and aluminium. Machinability was assessed in terms of tool life/wear, force/torque, hole size and geometrical accuracy, workpiece surface integrity and chip morphology. Initial trials (Phase 1A) were performed to investigate the effect of peel ply layers (~100 mim thick nylon sheet attached on both sides of the laminate to assist the bleeding of volatiles and air during curing as well as preventing surface contamination) on hole entry and exit quality, as current industrial practice involves removal of the protective sheet prior to drilling.
Lingua: Inglese
Editore: Springer, 2021
- Rilegato
- Print on Demand
Da: Brook Bookstore On Demand, Napoli, NA, ItaliaBrook Bookstore On Demand
Contatta il venditoreVenditore con 5 stelleCondizione: Nuovo
EUR 142,27
EUR 8,00 spedizioneSpedito da Italia a U.S.A.Quantità: Più di 20 disponibili
Condizione: new. Questo è un articolo print on demand.
