Sidorov nikolai (26 risultati)

hardcover. Condizione: Very Good. Fast Shipping - Safe and Secure 7 days a week.

Condizione: new. "The Proterozoic and Phanerozoic metallogenic and tectonic evolution of the Russian Far East, Alaska, and the Canadian Cordillera is recorded in the cratons, craton margins, and orogenic collages of the Circum-North Pacific mountain belts that separate the North Pacific from the eastern North Asian and western North American Cratons. The collages consist of tectonostratigraphic terranes and contained metallogenic belts, which are composed of fragments of igneous arcs, accretionary-wedge and subduction-zone complexes, passive continental margins, and cratons. The terranes are overlapped by continental-margin-arc and sedimentary-basin assemblages and contained metallogenic belts. The metallogenic and geologic history of terranes, overlap assemblages, cratons, and craton margins has been complicated by postaccretion dismemberment and translation during strike-slip faulting that occurred subparallel to continental margins. Seven processes overlapping in time were responsible for most of metallogenic and geologic complexities of the region (1) In the Early and Middle Proterozoic, marine sedimentary basins developed on major cratons and were the loci for ironstone (Superior Fe) deposits and sediment-hosted Cu deposits that occur along both the North Asia Craton and North American Craton Margin. (2) In the Late Proterozoic, Late Devonian, and Early Carboniferous, major periods of rifting occurred along the ancestral margins of present-day Northeast Asia and northwestern North America. The rifting resulted in fragmentation of each continent, and formation of cratonal and passive continental-margin terranes that eventually migrated and accreted to other sites along the evolving margins of the original or adjacent continents. The rifting also resulted in formation of various massive-sulfide metallogenic belts. (3) From about the late Paleozoic through the mid-Cretaceous, a succession of island arcs and contained igneous-arc-related metallogenic belts and tectonically paired subduction zones formed near continental margins. (4) From about mainly the mid-Cretaceous through the present, a succession of continental-margin igneous arcs (some extending offshore into island arcs) and contained metallogenic belts, and tectonically paired subduction zones formed along the continental margins. (5) From about the Jurassic to the present, oblique convergence and rotations caused orogen-parallel sinistral, and then dextral displacements within the plate margins of the Northeast Asian and North American Cratons. The oblique convergences and rotations resulted in the fragmentation, displacement, and duplication of formerly more continuous arcs, subduction zones, passive continental margins, and contained metallogenic belts. These fragments were subsequently accreted along the margins of the expanding continental margins. (6) From the Early Jurassic through Tertiary, movement of the upper continental plates toward subduction zones resulted in strong plate coupling and accretion of the former island arcs, subduction zones, and contained metallogenic belts to continental margins. In this region, the multiple arc accretions were accompanied and followed by crustal thickening, anatexis, metamorphism, formation of collision-related metallogenic belts, and uplift; this resulted in the substantial growth of the North Asian and North American continents. (7) In the middle and late Cenozoic, oblique to orthogonal convergence of the Pacific Plate with present-day Alaska and Northeast Asia resulted in formation of the present ring of volcanoes and contained metallogenic belts around the Circum-North Pacific. Oblique convergence between the Pacific Plate and Alaska also resulted in major dextral-slip faulting in interior and southern Alaska and along the western part of the Aleutian- Wrangell arc. Associated with dextral-slip faulting was crustal extrusion of terranes from western Alaska into the Bering Sea. " DV2. softcover, wrapped in shrink wrap, tight, crisp.…

Condizione: new. "The Proterozoic and Phanerozoic metallogenic and tectonic evolution of the Russian Far East, Alaska, and the Canadian Cordillera is recorded in the cratons, craton margins, and orogenic collages of the Circum-North Pacific mountain belts that separate the North Pacific from the eastern North Asian and western North American Cratons. The collages consist of tectonostratigraphic terranes and contained metallogenic belts, which are composed of fragments of igneous arcs, accretionary-wedge and subduction-zone complexes, passive continental margins, and cratons. The terranes are overlapped by continental-margin-arc and sedimentary-basin assemblages and contained metallogenic belts. The metallogenic and geologic history of terranes, overlap assemblages, cratons, and craton margins has been complicated by postaccretion dismemberment and translation during strike-slip faulting that occurred subparallel to continental margins. Seven processes overlapping in time were responsible for most of metallogenic and geologic complexities of the region (1) In the Early and Middle Proterozoic, marine sedimentary basins developed on major cratons and were the loci for ironstone (Superior Fe) deposits and sediment-hosted Cu deposits that occur along both the North Asia Craton and North American Craton Margin. (2) In the Late Proterozoic, Late Devonian, and Early Carboniferous, major periods of rifting occurred along the ancestral margins of present-day Northeast Asia and northwestern North America. The rifting resulted in fragmentation of each continent, and formation of cratonal and passive continental-margin terranes that eventually migrated and accreted to other sites along the evolving margins of the original or adjacent continents. The rifting also resulted in formation of various massive-sulfide metallogenic belts. (3) From about the late Paleozoic through the mid-Cretaceous, a succession of island arcs and contained igneous-arc-related metallogenic belts and tectonically paired subduction zones formed near continental margins. (4) From about mainly the mid-Cretaceous through the present, a succession of continental-margin igneous arcs (some extending offshore into island arcs) and contained metallogenic belts, and tectonically paired subduction zones formed along the continental margins. (5) From about the Jurassic to the present, oblique convergence and rotations caused orogen-parallel sinistral, and then dextral displacements within the plate margins of the Northeast Asian and North American Cratons. The oblique convergences and rotations resulted in the fragmentation, displacement, and duplication of formerly more continuous arcs, subduction zones, passive continental margins, and contained metallogenic belts. These fragments were subsequently accreted along the margins of the expanding continental margins. (6) From the Early Jurassic through Tertiary, movement of the upper continental plates toward subduction zones resulted in strong plate coupling and accretion of the former island arcs, subduction zones, and contained metallogenic belts to continental margins. In this region, the multiple arc accretions were accompanied and followed by crustal thickening, anatexis, metamorphism, formation of collision-related metallogenic belts, and uplift; this resulted in the substantial growth of the North Asian and North American continents. (7) In the middle and late Cenozoic, oblique to orthogonal convergence of the Pacific Plate with present-day Alaska and Northeast Asia resulted in formation of the present ring of volcanoes and contained metallogenic belts around the Circum-North Pacific. Oblique convergence between the Pacific Plate and Alaska also resulted in major dextral-slip faulting in interior and southern Alaska and along the western part of the Aleutian- Wrangell arc. Associated with dextral-slip faulting was crustal extrusion of terranes from western Alaska into the Bering Sea. " DV1. softcover, wrapped in shrink wrap, tight, crisp.…

Condizione: new. "The Proterozoic and Phanerozoic metallogenic and tectonic evolution of the Russian Far East, Alaska, and the Canadian Cordillera is recorded in the cratons, craton margins, and orogenic collages of the Circum-North Pacific mountain belts that separate the North Pacific from the eastern North Asian and western North American Cratons. The collages consist of tectonostratigraphic terranes and contained metallogenic belts, which are composed of fragments of igneous arcs, accretionary-wedge and subduction-zone complexes, passive continental margins, and cratons. The terranes are overlapped by continental-margin-arc and sedimentary-basin assemblages and contained metallogenic belts. The metallogenic and geologic history of terranes, overlap assemblages, cratons, and craton margins has been complicated by postaccretion dismemberment and translation during strike-slip faulting that occurred subparallel to continental margins. Seven processes overlapping in time were responsible for most of metallogenic and geologic complexities of the region (1) In the Early and Middle Proterozoic, marine sedimentary basins developed on major cratons and were the loci for ironstone (Superior Fe) deposits and sediment-hosted Cu deposits that occur along both the North Asia Craton and North American Craton Margin. (2) In the Late Proterozoic, Late Devonian, and Early Carboniferous, major periods of rifting occurred along the ancestral margins of present-day Northeast Asia and northwestern North America. The rifting resulted in fragmentation of each continent, and formation of cratonal and passive continental-margin terranes that eventually migrated and accreted to other sites along the evolving margins of the original or adjacent continents. The rifting also resulted in formation of various massive-sulfide metallogenic belts. (3) From about the late Paleozoic through the mid-Cretaceous, a succession of island arcs and contained igneous-arc-related metallogenic belts and tectonically paired subduction zones formed near continental margins. (4) From about mainly the mid-Cretaceous through the present, a succession of continental-margin igneous arcs (some extending offshore into island arcs) and contained metallogenic belts, and tectonically paired subduction zones formed along the continental margins. (5) From about the Jurassic to the present, oblique convergence and rotations caused orogen-parallel sinistral, and then dextral displacements within the plate margins of the Northeast Asian and North American Cratons. The oblique convergences and rotations resulted in the fragmentation, displacement, and duplication of formerly more continuous arcs, subduction zones, passive continental margins, and contained metallogenic belts. These fragments were subsequently accreted along the margins of the expanding continental margins. (6) From the Early Jurassic through Tertiary, movement of the upper continental plates toward subduction zones resulted in strong plate coupling and accretion of the former island arcs, subduction zones, and contained metallogenic belts to continental margins. In this region, the multiple arc accretions were accompanied and followed by crustal thickening, anatexis, metamorphism, formation of collision-related metallogenic belts, and uplift; this resulted in the substantial growth of the North Asian and North American continents. (7) In the middle and late Cenozoic, oblique to orthogonal convergence of the Pacific Plate with present-day Alaska and Northeast Asia resulted in formation of the present ring of volcanoes and contained metallogenic belts around the Circum-North Pacific. Oblique convergence between the Pacific Plate and Alaska also resulted in major dextral-slip faulting in interior and southern Alaska and along the western part of the Aleutian- Wrangell arc. Associated with dextral-slip faulting was crustal extrusion of terranes from western Alaska into the Bering Sea." DV4. softcover, wrapped in shrink wrap, tight, crisp, 4.…

Condizione: new. The Proterozoic and Phanerozoic metallogenic and tectonic evolution of the Russian Far East, Alaska, and the Canadian Cordillera is recorded in the cratons, craton margins, and orogenic collages of the Circum-North Pacific mountain belts that separate the North Pacific from the eastern North Asian and western North American Cratons. The collages consist of tectonostratigraphic terranes and contained metallogenic belts, which are composed of fragments of igneous arcs, accretionary-wedge and subduction-zone complexes, passive continental margins, and cratons. The terranes are overlapped by continental-margin-arc and sedimentary-basin assemblages and contained metallogenic belts. The metallogenic and geologic history of terranes, overlap assemblages, cratons, and craton margins has been complicated by postaccretion dismemberment and translation during strike-slip faulting that occurred subparallel to continental margins. Seven processes overlapping in time were responsible for most of metallogenic and geologic complexities of the region (1) In the Early and Middle Proterozoic, marine sedimentary basins developed on major cratons and were the loci for ironstone (Superior Fe) deposits and sediment-hosted Cu deposits that occur along both the North Asia Craton and North American Craton Margin. (2) In the Late Proterozoic, Late Devonian, and Early Carboniferous, major periods of rifting occurred along the ancestral margins of present-day Northeast Asia and northwestern North America. The rifting resulted in fragmentation of each continent, and formation of cratonal and passive continental-margin terranes that eventually migrated and accreted to other sites along the evolving margins of the original or adjacent continents. The rifting also resulted in formation of various massive-sulfide metallogenic belts. (3) From about the late Paleozoic through the mid-Cretaceous, a succession of island arcs and contained igneous-arc-related metallogenic belts and tectonically paired subduction zones formed near continental margins. (4) From about mainly the mid-Cretaceous through the present, a succession of continental-margin igneous arcs (some extending offshore into island arcs) and contained metallogenic belts, and tectonically paired subduction zones formed along the continental margins. (5) From about the Jurassic to the present, oblique convergence and rotations caused orogen-parallel sinistral, and then dextral displacements within the plate margins of the Northeast Asian and North American Cratons. The oblique convergences and rotations resulted in the fragmentation, displacement, and duplication of formerly more continuous arcs, subduction zones, passive continental margins, and contained metallogenic belts. These fragments were subsequently accreted along the margins of the expanding continental margins. (6) From the Early Jurassic through Tertiary, movement of the upper continental plates toward subduction zones resulted in strong plate coupling and accretion of the former island arcs, subduction zones, and contained metallogenic belts to continental margins. In this region, the multiple arc accretions were accompanied and followed by crustal thickening, anatexis, metamorphism, formation of collision-related metallogenic belts, and uplift; this resulted in the substantial growth of the North Asian and North American continents. (7) In the middle and late Cenozoic, oblique to orthogonal convergence of the Pacific Plate with present-day Alaska and Northeast Asia resulted in formation of the present ring of volcanoes and contained metallogenic belts around the Circum-North Pacific. Oblique convergence between the Pacific Plate and Alaska also resulted in major dextral-slip faulting in interior and southern Alaska and along the western part of the Aleutian- Wrangell arc. Associated with dextral-slip faulting was crustal extrusion of terranes from western Alaska into the Bering Sea. DX1. softcover, wrapped in shrink wrap, tight, crisp, 429.…

Condizione: new. The Proterozoic and Phanerozoic metallogenic and tectonic evolution of the Russian Far East, Alaska, and the Canadian Cordillera is recorded in the cratons, craton margins, and orogenic collages of the Circum-North Pacific mountain belts that separate the North Pacific from the eastern North Asian and western North American Cratons. The collages consist of tectonostratigraphic terranes and contained metallogenic belts, which are composed of fragments of igneous arcs, accretionary-wedge and subduction-zone complexes, passive continental margins, and cratons. The terranes are overlapped by continental-margin-arc and sedimentary-basin assemblages and contained metallogenic belts. The metallogenic and geologic history of terranes, overlap assemblages, cratons, and craton margins has been complicated by postaccretion dismemberment and translation during strike-slip faulting that occurred subparallel to continental margins. Seven processes overlapping in time were responsible for most of metallogenic and geologic complexities of the region (1) In the Early and Middle Proterozoic, marine sedimentary basins developed on major cratons and were the loci for ironstone (Superior Fe) deposits and sediment-hosted Cu deposits that occur along both the North Asia Craton and North American Craton Margin. (2) In the Late Proterozoic, Late Devonian, and Early Carboniferous, major periods of rifting occurred along the ancestral margins of present-day Northeast Asia and northwestern North America. The rifting resulted in fragmentation of each continent, and formation of cratonal and passive continental-margin terranes that eventually migrated and accreted to other sites along the evolving margins of the original or adjacent continents. The rifting also resulted in formation of various massive-sulfide metallogenic belts. (3) From about the late Paleozoic through the mid-Cretaceous, a succession of island arcs and contained igneous-arc-related metallogenic belts and tectonically paired subduction zones formed near continental margins. (4) From about mainly the mid-Cretaceous through the present, a succession of continental-margin igneous arcs (some extending offshore into island arcs) and contained metallogenic belts, and tectonically paired subduction zones formed along the continental margins. (5) From about the Jurassic to the present, oblique convergence and rotations caused orogen-parallel sinistral, and then dextral displacements within the plate margins of the Northeast Asian and North American Cratons. The oblique convergences and rotations resulted in the fragmentation, displacement, and duplication of formerly more continuous arcs, subduction zones, passive continental margins, and contained metallogenic belts. These fragments were subsequently accreted along the margins of the expanding continental margins. (6) From the Early Jurassic through Tertiary, movement of the upper continental plates toward subduction zones resulted in strong plate coupling and accretion of the former island arcs, subduction zones, and contained metallogenic belts to continental margins. In this region, the multiple arc accretions were accompanied and followed by crustal thickening, anatexis, metamorphism, formation of collision-related metallogenic belts, and uplift; this resulted in the substantial growth of the North Asian and North American continents. (7) In the middle and late Cenozoic, oblique to orthogonal convergence of the Pacific Plate with present-day Alaska and Northeast Asia resulted in formation of the present ring of volcanoes and contained metallogenic belts around the Circum-North Pacific. Oblique convergence between the Pacific Plate and Alaska also resulted in major dextral-slip faulting in interior and southern Alaska and along the western part of the Aleutian- Wrangell arc. Associated with dextral-slip faulting was crustal extrusion of terranes from western Alaska into the Bering Sea. softcover, wrapped in shrink wrap, tight, crisp, 429 page.…

hardcover. Condizione: Very Good.

Condizione: New.

Hardback. Condizione: New. This book presents an overview of the most recent research and findings in the field of approximation and regularisation methods for operator-functional equations, and explores their applications in electrical and power engineering. It presents the state of the art in building operator theory, regularised numerical methods, and the verification of mathematical models for dynamical models based on integral and differential equations. Special attention is paid to Volterra models, a powerful tool for modelling hereditary dynamics.This book begins by exploring the solvability of singular integral equations and moves on to study approximation methods for linear operator equations and nonlinear integral equations. Following this, it examines loaded equations and bifurcation analysis, before concluding with an investigation of the applications of the contents of the book in electrical engineering and automation. Each chapter provides an overview and analysis of the relevant problem statements, outlines current methods within the field, and identifies future directions for research.With an interdisciplinary approach, this book is essential reading for anyone interested in operator-functional equations. Graduate students and professors in the fields of applied mathematics, physics, materials science, and numerical analysis will find this work insightful and valuable, as will industry professionals in related fields.…

Condizione: New. In English.

Hardback. Condizione: New. This book presents an overview of the most recent research and findings in the field of approximation and regularisation methods for operator-functional equations, and explores their applications in electrical and power engineering. It presents the state of the art in building operator theory, regularised numerical methods, and the verification of mathematical models for dynamical models based on integral and differential equations. Special attention is paid to Volterra models, a powerful tool for modelling hereditary dynamics.This book begins by exploring the solvability of singular integral equations and moves on to study approximation methods for linear operator equations and nonlinear integral equations. Following this, it examines loaded equations and bifurcation analysis, before concluding with an investigation of the applications of the contents of the book in electrical engineering and automation. Each chapter provides an overview and analysis of the relevant problem statements, outlines current methods within the field, and identifies future directions for research.With an interdisciplinary approach, this book is essential reading for anyone interested in operator-functional equations. Graduate students and professors in the fields of applied mathematics, physics, materials science, and numerical analysis will find this work insightful and valuable, as will industry professionals in related fields.…

Hardback. Condizione: New. This book presents an overview of the most recent research and findings in the field of approximation and regularisation methods for operator-functional equations, and explores their applications in electrical and power engineering. It presents the state of the art in building operator theory, regularised numerical methods, and the verification of mathematical models for dynamical models based on integral and differential equations. Special attention is paid to Volterra models, a powerful tool for modelling hereditary dynamics.This book begins by exploring the solvability of singular integral equations and moves on to study approximation methods for linear operator equations and nonlinear integral equations. Following this, it examines loaded equations and bifurcation analysis, before concluding with an investigation of the applications of the contents of the book in electrical engineering and automation. Each chapter provides an overview and analysis of the relevant problem statements, outlines current methods within the field, and identifies future directions for research.With an interdisciplinary approach, this book is essential reading for anyone interested in operator-functional equations. Graduate students and professors in the fields of applied mathematics, physics, materials science, and numerical analysis will find this work insightful and valuable, as will industry professionals in related fields.…

Hardcover. Condizione: Brand New. illustrated edition. 384 pages. 9.50x6.25x1.25 inches. In Stock.

Condizione: New. In English.

Hardback. Condizione: New. This book presents an overview of the most recent research and findings in the field of approximation and regularisation methods for operator-functional equations, and explores their applications in electrical and power engineering. It presents the state of the art in building operator theory, regularised numerical methods, and the verification of mathematical models for dynamical models based on integral and differential equations. Special attention is paid to Volterra models, a powerful tool for modelling hereditary dynamics.This book begins by exploring the solvability of singular integral equations and moves on to study approximation methods for linear operator equations and nonlinear integral equations. Following this, it examines loaded equations and bifurcation analysis, before concluding with an investigation of the applications of the contents of the book in electrical engineering and automation. Each chapter provides an overview and analysis of the relevant problem statements, outlines current methods within the field, and identifies future directions for research.With an interdisciplinary approach, this book is essential reading for anyone interested in operator-functional equations. Graduate students and professors in the fields of applied mathematics, physics, materials science, and numerical analysis will find this work insightful and valuable, as will industry professionals in related fields.…

Cloth. Condizione: Near Fine. Octavo (7¾" - 9¾" tall). Cyrillic text. 189pp. Poems illustrated with one-page and double-page color plates. Bound in white cloth boards, enclosed in cloth chemise folder, with black title and brown cover devise.

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Danilovich. A Town in the Woods. Yaroslavl: Verkh.-Volga Book of Books, 1977. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU7663382.…

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Pavlovich. Centralized management of production of maintenance and repair of automobiles in the road transport association. Leningrad: 1976. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU6998607.…

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Alexandrovich. Scientific and Technological Progress in Gas Well Drilling. Moscow: 1976. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU6998606.…

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Isaevich. The Effective Use of Youth Labor. Moscow: Economy, 1974. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU7443788.

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Ivanovich. How the electric locomotive is designed and operates. Moscow: Transport, 1974. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU7443787.…

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Evstropovich. Technological Progress and Reduction of Energy Intensity of Iron and Steel Products. Kyiv: Science Dumka, 1974. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU7443784.…

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Evstropovich. Iron and manganese losses and ways to reduce them in the ferrous metallurgy of the Ukrainian SSR. Kyiv: 1971. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU7443783.…

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Andreevich. Sorption processes, distillation and rectification. Kharkiv: 1974. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU7443778.…

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Emelyanovich. Tears in the uterus following a caesarean section. Kazan, Tatar edition, 1974. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU7443786.…

Hardcover. Condizione: Good. In Russian. Sidorov, Nikolai Emelyanovich. Contrast radiography of uterine changes after caesarean section surgery and diagnosis of a defective scar. Kazan: 1970. All images are for identification of editions only. Several books of the same edition may be available. Please feel free to request photos of available books.SKU7443785. …