tavan yadollah (22 risultati)

Condizione: New.

Paperback. Condizione: Brand New. 148 pages. 8.66x5.91x0.34 inches. In Stock.

Paperback. Condizione: Brand New. 132 pages. 8.66x5.91x0.30 inches. In Stock.

Taschenbuch. Condizione: Neu. Simulation of extractive distillation of the CO2- ethane azeotrope | Process Optimization, Process Intensification | Yadollah Tavan | Taschenbuch | 148 S. | Englisch | 2015 | LAP LAMBERT Academic Publishing | EAN 9783659649585 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

Taschenbuch. Condizione: Neu. Catalytic and Simulation Studies of Dimethyl Ether Synthesis | Process Design and Catalyst Synthesis | Yadollah Tavan | Taschenbuch | 132 S. | Englisch | 2013 | LAP LAMBERT Academic Publishing | EAN 9783659465925 | Verantwortliche Person für die EU: BoD - Books on Demand, In de Tarpen 42, 22848 Norderstedt, info[at]bod[dot]de | Anbieter: preigu.

Taschenbuch. Condizione: Neu. Reactive distillation processes to break azeotropes | Process intensification, process design | Yadollah Tavan | Taschenbuch | 148 S. | Englisch | 2013 | LAP LAMBERT Academic Publishing | EAN 9783659467318 | Verantwortliche Person für die EU: preigu GmbH & Co. KG, Lengericher Landstr. 19, 49078 Osnabrück, mail[at]preigu[dot]de | Anbieter: preigu.

paperback. Condizione: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

paperback. Condizione: New. NEW. SHIPS FROM MULTIPLE LOCATIONS. book.

Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -High concentrations of carbon dioxide in natural gas occur when carbon dioxide is used for enhanced oil recovery. The separation of CO2 from the hydrocarbons in the natural gas is complicated due to the existence of an azeotrope between ethane (C2) and CO2 at the cryogenic temperatures required for distillation. The main disadvantage of the conventional process lies in its high capital investment and external energy input required to fulfill the desired purification. In addition, current process is different from conventional extractive distillation columns. Because in conventional extractive columns a third component is added to the system and solvent losses in the product streams requires a make-up stream. However, in the present book, the solvent is a mixture of C3 and heavier components in which the solvent stream is quite similar to the light key (ethane) and these distinct features of the process leads to some convergence problems. In order to address these issues, applications of reactive absorption, dividing-wall column and feed-splitting techniques are investigated for this azeotropic mixture and a comparison is made for the new processes. 148 pp. Englisch.

Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -In the chemical industry, the demand for purer products, coupled with relentless pursuit for greater efficiency, has necessitated continued research into the techniques of distillations. Distillation is one of the oldest and most important separation processes used in the chemical and petrochemical industries. It is a process wherein the energy requirement is a critical target. The base of this process is a difference in volatility of the components, which should be separated. Among several distillation techniques, reactive distillation (RD) has become an interesting alternative for some conventional processes, especially the equilibrium-limited reactions. The RD combines reaction and distillation in a single column, where reactants are converted to products with simultaneous separation of the products and recycle of unused reactants. This simultaneous reaction and separation allows crossing of azeotropic concentrations and distillation boundaries,hence facilitating product purification.In this book, the removal of some important azeotropes i.e. ethanol/water is conceptually investigated and relevant sensitivity analysis is also conducted. 148 pp. Englisch.

Taschenbuch. Condizione: Neu. This item is printed on demand - it takes 3-4 days longer - Neuware -Dimethyl ether (DME) is a clean and colorless gas that has remarkable potential for use as an automotive fuel and in domestic applications. DME is commercially produced by methanol dehydration reaction that uses solid acid catalysts. Among the catalysts, Gamma-alumina and HZSM-5 are extensively studied and they have attracted a great deal of attention as potential catalysts because of their high activity and proper stability. In this book, it is attempted to find suitable rate of reactions over HZSM-5 and Gamma-alumina at industrial conditions. In addition, a comparison between the performances of the catalysts is performed. It is found that HZSM-5 has superior performances compared to the Gamma-alumina in terms of conversion. Modeling results are also indicated that the proposed rate of reaction predicts the behavior of the process, properly. Therefore, the vapor phase DME synthesis is simulated by Hysys process simulation software and relevant cost analysis is also conducted and some new processes are investigated to reduce capital and operating costs. Moreover, the HZSM-5 material is modified by aluminophosphate catalyst to improve its activity and retarding hydrocarbon formation. 132 pp. Englisch.

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Tavan YadollahHe is an independent researcher and a graduate of Chemical Engineering (with specialty in process and gas engineering) from Petroleum University of Technology, Iran, with additional focus on catalysis. Currently his mai.

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Tavan YadollahHe received his M.Sc in Chemical Engineering from Petroleum University of Technology.He is now a member of National Iranian Gas Company, acted as senior operator in Ilam Gas Treating Plant for a year.He has published ov.

Condizione: New. Dieser Artikel ist ein Print on Demand Artikel und wird nach Ihrer Bestellung fuer Sie gedruckt. Autor/Autorin: Tavan YadollahHe is an independent researcher and a graduate of Chemical Engineering (with specialty in process and gas engineering) from Petroleum University of Technology, Iran, with additional focus on catalysis. Currently his mai.

Condizione: New. Print on Demand.

Condizione: New. PRINT ON DEMAND.

Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - Dimethyl ether (DME) is a clean and colorless gas that has remarkable potential for use as an automotive fuel and in domestic applications. DME is commercially produced by methanol dehydration reaction that uses solid acid catalysts. Among the catalysts, Gamma-alumina and HZSM-5 are extensively studied and they have attracted a great deal of attention as potential catalysts because of their high activity and proper stability. In this book, it is attempted to find suitable rate of reactions over HZSM-5 and Gamma-alumina at industrial conditions. In addition, a comparison between the performances of the catalysts is performed. It is found that HZSM-5 has superior performances compared to the Gamma-alumina in terms of conversion. Modeling results are also indicated that the proposed rate of reaction predicts the behavior of the process, properly. Therefore, the vapor phase DME synthesis is simulated by Hysys process simulation software and relevant cost analysis is also conducted and some new processes are investigated to reduce capital and operating costs. Moreover, the HZSM-5 material is modified by aluminophosphate catalyst to improve its activity and retarding hydrocarbon formation.

Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -In the chemical industry, the demand for purer products, coupled with relentless pursuit for greater efficiency, has necessitated continued research into the techniques of distillations. Distillation is one of the oldest and most important separation processes used in the chemical and petrochemical industries. It is a process wherein the energy requirement is a critical target. The base of this process is a difference in volatility of the components, which should be separated. Among several distillation techniques, reactive distillation (RD) has become an interesting alternative for some conventional processes, especially the equilibrium-limited reactions. The RD combines reaction and distillation in a single column, where reactants are converted to products with simultaneous separation of the products and recycle of unused reactants. This simultaneous reaction and separation allows crossing of azeotropic concentrations and distillation boundaries,hence facilitating product purification.In this book, the removal of some important azeotropes i.e. ethanol/water is conceptually investigated and relevant sensitivity analysis is also conducted.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 148 pp. Englisch.

Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -High concentrations of carbon dioxide in natural gas occur when carbon dioxide is used for enhanced oil recovery. The separation of CO2 from the hydrocarbons in the natural gas is complicated due to the existence of an azeotrope between ethane (C2) and CO2 at the cryogenic temperatures required for distillation. The main disadvantage of the conventional process lies in its high capital investment and external energy input required to fulfill the desired purification. In addition, current process is different from conventional extractive distillation columns. Because in conventional extractive columns a third component is added to the system and solvent losses in the product streams requires a make-up stream. However, in the present book, the solvent is a mixture of C3 and heavier components in which the solvent stream is quite similar to the light key (ethane) and these distinct features of the process leads to some convergence problems. In order to address these issues, applications of reactive absorption, dividing-wall column and feed-splitting techniques are investigated for this azeotropic mixture and a comparison is made for the new processes.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 148 pp. Englisch.

Taschenbuch. Condizione: Neu. This item is printed on demand - Print on Demand Titel. Neuware -Dimethyl ether (DME) is a clean and colorless gas that has remarkable potential for use as an automotive fuel and in domestic applications. DME is commercially produced by methanol dehydration reaction that uses solid acid catalysts. Among the catalysts, ¿-alumina and HZSM-5 are extensively studied and they have attracted a great deal of attention as potential catalysts because of their high activity and proper stability. In this book, it is attempted to find suitable rate of reactions over HZSM-5 and ¿-alumina at industrial conditions. In addition, a comparison between the performances of the catalysts is performed. It is found that HZSM-5 has superior performances compared to the ¿-alumina in terms of conversion. Modeling results are also indicated that the proposed rate of reaction predicts the behavior of the process, properly. Therefore, the vapor phase DME synthesis is simulated by Hysys process simulation software and relevant cost analysis is also conducted and some new processes are investigated to reduce capital and operating costs. Moreover, the HZSM-5 material is modified by aluminophosphate catalyst to improve its activity and retarding hydrocarbon formation.VDM Verlag, Dudweiler Landstraße 99, 66123 Saarbrücken 132 pp. Englisch.

Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - In the chemical industry, the demand for purer products, coupled with relentless pursuit for greater efficiency, has necessitated continued research into the techniques of distillations. Distillation is one of the oldest and most important separation processes used in the chemical and petrochemical industries. It is a process wherein the energy requirement is a critical target. The base of this process is a difference in volatility of the components, which should be separated. Among several distillation techniques, reactive distillation (RD) has become an interesting alternative for some conventional processes, especially the equilibrium-limited reactions. The RD combines reaction and distillation in a single column, where reactants are converted to products with simultaneous separation of the products and recycle of unused reactants. This simultaneous reaction and separation allows crossing of azeotropic concentrations and distillation boundaries,hence facilitating product purification.In this book, the removal of some important azeotropes i.e. ethanol/water is conceptually investigated and relevant sensitivity analysis is also conducted.

Taschenbuch. Condizione: Neu. nach der Bestellung gedruckt Neuware - Printed after ordering - High concentrations of carbon dioxide in natural gas occur when carbon dioxide is used for enhanced oil recovery. The separation of CO2 from the hydrocarbons in the natural gas is complicated due to the existence of an azeotrope between ethane (C2) and CO2 at the cryogenic temperatures required for distillation. The main disadvantage of the conventional process lies in its high capital investment and external energy input required to fulfill the desired purification. In addition, current process is different from conventional extractive distillation columns. Because in conventional extractive columns a third component is added to the system and solvent losses in the product streams requires a make-up stream. However, in the present book, the solvent is a mixture of C3 and heavier components in which the solvent stream is quite similar to the light key (ethane) and these distinct features of the process leads to some convergence problems. In order to address these issues, applications of reactive absorption, dividing-wall column and feed-splitting techniques are investigated for this azeotropic mixture and a comparison is made for the new processes.